• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제11권1호
• /
• pp.65-70
• /
• 2011

The increased disk rotational velocity to improve the data transfer rate has raised up many serious problems in its servo control system which should control the position and velocity of a spot relative to a rotating disk. This paper proposes gain-scheduling-based track-seek control for single stage actuator of hard disk drives. Gain scheduling is a technique that can extend the validity of the linearization approach to a range of operating points and one of the most popular approaches to nonlinear control design. The proposed method schedules controller gains to improve the transient response and minimize overshoot during the functions of the read/write head positioning servomechanism for the seek control. The validity of the proposed method is demonstrated through stability analysis and simulation results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.807-811
• /
• 2002

As the requirements on precision and speed of motion in chip mounter increase, vibration forces are always exerted on operating conditions. To insure safety of the chip mounter, the vibration must be kept within an acceptable limit. The focus of this paper is on the identification of dynamic load characteristics and the estimation of static and dynamic stiffness characteristics for Frame Base by judicious selection of the number and the location of the support points. This study carried an analytical and experimental method to estimate the dynamic characteristics in structure.

• 제어로봇시스템학회논문지
• /
• 제7권11호
• /
• pp.962-966
• /
• 2001

The major problem at a branch point for point-to-multipoint available bit rate(ABR) services in asynchronous transfer mode (ATM) networks is how to consolidate backward resource management(BRM) cells from each branch for a multicast connection. In this paper, we propose an efficient feedback consolidation algorithm based on an adaptive dynamic threshold(ADT) to eliminate the consolidation noise and the reduce the consolidation delay. The main idea of the ADT algorithm lies in that each branch point estimates the ABR traffic condition of the network through the virtual queue estimation and the transmission threshold of the queue level in branch points is adaptively controlled according to the estimation. Simulation results show that the proposed ADT algorithm can achieve a faster response in congestion status and a higher link utilization compared with the previous works.

• 한국전산유체공학회지
• /
• 제6권4호
• /
• pp.15-25
• /
• 2001

Numerical prediction of the diffusion controlled transition in a turbine gas pass is important because it can change the local heat transfer rate over a turbine blade as much as three times. In this study, the gas flow over turbine blade is simplified to the flat plate boundary layer, and an adaptive grid scheme redistributing grid points within the computation domain is proposed with a great emphasis on the construction of the grid control function. The function is sensitized to the second invariant of the mean strain tensor, its spatial gradient, and the interaction of pressure gradient and flow deformation. The transition process is assumed to be described with a κ-ε turbulence model. An elliptic solver is employed to integrate governing equations. Numerical results show that the proposed adaptive grid scheme is very effective in obtaining grid independent numerical solution with a very low grid number. It is expected that present scheme is helpful in predicting actual flow within a turbine to improve computation efficiency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1038-1040
• /
• 1992

Booster is used widely as one of the step-up DC/DC power converter in power conversion process for fuel cell power plant which have the electrical characteristic of the high current density and low cell voltage. In view of control system, booster can be unstable when it is operated in broad operation range because the transfer function of booster has zero in right half plane of s-domain. So for reliable operation, controller must make the system stable in whole working range. In this paper, the two control method such as digital PID control and fuzzy control is studied for booster output voltage regulation in fuel cell plant. The design procedure of PID control and fuzzy control is described. And the experiment of designed controller action is performed in various operation points for controller performance test.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.592-595
• /
• 2009

In recent years, geothermal heat pump (GHP) systems have become increasingly popular for heating and cooling in buildings. The Standing Column Well (SCW) method is one of the most efficient GHP system. Because it use groundwater for heat transfer material. In SCW systems, water is re-circulated between the well and the building (heat pump). It is only a short time since this method has been applied in domestic. So we have to refer to the developed countries' guides and manuals of SCW. In this paper, several design and construction points of SCW method are filed. We used real operation data of SCW system at Chong-Ju Univ. site for economical efficiency analysis. As a result, the payback period of Chong-Ju Univ. site is calculated at 7.23 years.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.388-393
• /
• 1988

New circuit D-Q transformation concept is introduced to analyze AC converters such as inverters, rectifiers and cyclo-converters with ease. The equivalent linear time invariant circuit is obtained by substituting switches with equivalent turn-ratio variable transformers and changing balanced AC reactors into equivalent DC reactors combined by gyrators. This circuit enables us to utilize the powerful linear system analysis techniques such as Laplace transform otherwise which could not be applied to the time varying switching systems. Direct substitution of switches of DC converters with transformers is shown as a preliminary. Then the modeling procedure is shown for a controlled rectifier-inverter circuit. Finally an analysis example is proposed for a buck-boost inverter and the result is compared with the conventional approach. This approach is applicable to all AC converter families to determine the AC transfer functions and the DC operating points. It is identified that the switching systems are equivalent to the RLC filter circuits with transformers and gyrators.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권2호
• /
• pp.141-146
• /
• 1999

The eigenvalue equations of multiple waveguides with step-index profile are derived by using the WKB theory. Phase changes unique to step-index discontinuity areintroduced when applying the WKB connection formula to turning points. The transfer matrix method is employed for the analysis of multiple structure and the derived eigenvalue equation are represented in the recursive form. The results by the WKB are compared with those by the FEM for a three-waveguide coupler.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.1037-1040
• /
• 1998

In this research a fault-tolerant and bumpless switching control is proposed for boiler systems used in the power plants. Firstly, three operating points are selected to control the nonlinear boiler through the full operational range, and the $H_{\infty}$ loop shaping controller and the model-based predictive controller(MBPC) are designed. To prevent the windup and bump problems which are caused by the actuator saturation and the controller switching, an anti-windup and bumpless transfer technique is adopted to the $H_{\infty}$ loop shaping controller. Also the constrained gain-scheduling technique is applied to MBPC to achieve the same objective. Secondly, the fault-tolerant control technique is proposed to continue the control action without stopping the boiler operation even in case of some faults. Through various simulation studies, the performances of the proposed control techniques are demonstrated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.551-556
• /
• 2004

The Korean Train eXpress(KTX) which started in last April has got many complaints of passengers. This is caused by weak connections between KTX and traditional trains. This paper shows the methods to increase the connection in 3 points of view; business, operation and rolling stocks. For the flexible business, it is necessary that the connecting trains must be multi-purposefully for the satisfaction of KTX transferring passengers and existing commuting passengers. And the expanding of free class is needed. A free class is the base of business flexibility. In an operation point of view, I show the method that can decrease pains for getting transfer. Finally, for the effective using of rolling stocks, I propose that TC(trailer with control) car is added to existing locomotive and passenger coach set. In concluding, KTX needs strong connections with traditional trains. This will bring more competitive power with other transportation systems. And that method must get flexible and various service, in addition to effective and minimizing investment.