• Journal of Advanced Marine Engineering and Technology
• /
• 제39권10호
• /
• pp.1054-1061
• /
• 2015

The International Maritime Organization (IMO) has been regulating emissions by making mandatory the compliance with institutions aimed at protecting air quality such as the Energy Efficiency Design Index (EEDI), Ship Energy Efficiency Management Plan (SEEMP) and Tier III. Under the circumstances, one of the response measures considered to be the most feasible is the replacement of existing marine fuel with Liquefied Natural Gas (LNG). The industry has been preemptively building infrastructure and developing and spreading engine technology to enable the use of LNG-fueled ships. The IMO, in turn, recently adopted the International Code of Safety for Ships Using Gases or Other Low-Flash-Point Fuels (IGF Code) as an institutional measure. Thus, it is required to comply with regulations on safety-related design and systems focused on response against potential risk for LNG-fueled ships, in which low-flash-point fuel is handled in the engine room. Especially, the Standards of Training, Certification and Watchkeeping (STCW) Convention was amended accordingly. It has adopted the qualification and training requirements for seafarers who are to provide service aboard ships subject to the IGF Code exemplified by LNG-fueled ships. The expansion in the use of LNG-fueled ships and relevant facilities in fact is expected to increase demand for talents. Thus, the time is ripe to develop methods to set up appropriate STCW training courses for seafarers who board ships subject to the IGF Code. In this study, the STCW Convention and existing STCW training courses applied to seafarers offering service aboard ships subject to the IGF Code are reviewed. The results were reflected to propose ways to design new STCW training courses needed for ships subject to the IGF Code and to identify and improve insufficiencies of the STCW Convention in relation to the IGF Code.

• 수산해양교육연구
• /
• 제27권5호
• /
• pp.1404-1412
• /
• 2015

This study aimed at exploring, based on the current states and status of onboard training ship, plans to improve the boarding training management for fisheries high school. The results were as follows. The problems with the management of onboard training ship were summarized as the following four types. Firstly, The most training ships throughout the country became superannuated. Secondly, the safe equipments for training ships were necessary to compensate the defects to fall short of the international safety management standards. Thirdly, the problems could result from the dualized system between ownership and management, since training ships were owned by metropolitan and provincial education offices and operated by management centered schools. Fourthly, middle technicians such as professional fisheries manpower were not easily supplied with. The plans to improve the above problems were as in the following. Firstly, support and help of Ministry of Maritime Affairs and Fisheries were needed to launch new onboard training ships which substitute for the superannuated. Secondly, new onboard ships were required to be launched according to the updated international safety management standards. Thirdly, Korea Institute of Maritime and Fisheries Technology should hold onboard training. Fourthly, on-site onboard training expertise, systemic management, safety, etc. should be compensated through industry-university-institute collaboration.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.57-58
• /
• 2006

Pumps have been widely used for transporting fluid in most of the merchant ships. However, the present status of using pumps for marine vessels has not been studied. This paper is to classify and analyze pumps installed in many ships(LNGC, Oil Tanker, Bulk, Container, Training ship). Finally, Pumps installed in the training ships are compared with merchant ships about the present status of using pumps.

• 수산해양기술연구
• /
• 제59권3호
• /
• pp.261-263
• /
• 2023

Recently, universities of fisheries and institutions related to fisheries are actively carrying out a project to build new fisheries training ships. These new fisheries training ships are significantly larger in size and longer in length than the previous ships. In addition, these new ships basically have space that can accommodate more than 100 crew and passenger. On the other hand, they are excluded from IMO maneuverability evaluation since the size of these ships are still less than 100 m in length (LBP). These results have had an impact on the study of maneuverability of fishing vessels including the fisheries training ships. Against these backgrounds, the authors conducted a study to estimate the maneuvering characteristics of fisheries training ship Baek-Kyung according to depth in order to prepare a maneuvering characteristic index that enables the large fisheries training ships to navigate more safely using a modified empirical formula. It was confirmed that the maneuvering characteristics of Baek-Kyung changed significantly as the values of the hydrodynamic force coefficients changed as the water depth gradually decreased from around 1.5 (approx. 8 m in depth) of the ratio of the water depth to the ship draft. The results of this study will not only help navigators understand the maneuvering characteristics of Baek-Kyung, but also serve as an indicator when navigating in shallow water. In addition, the accumulation of these results will serve as a basis for future study on maneuverability of fishing vessel types.

• 수산해양교육연구
• /
• 제28권6호
• /
• pp.1591-1601
• /
• 2016

In recent years most of large-sized merchant ships have been equipped with a high-voltage system. The ships demanding a lot of electric power adopt the high voltage such as 3.3kV, 6.6kV, 11kV. Gradually as the high voltage system is increased in the ships, engineering officers are more opportunities to operate the high voltage system. So the high voltage training for engineering officers was established in the STCW 1978 as amended by the Manila Amendments in 2010. According to this convention when the engineering officers want to board the high voltage ships on and after January 1 in 2017, they must take the high voltage training. This paper, firstly, analyzes the content of high voltage training in STCW convention and IMO model course. In addition, it reviews the parts need to be considered in the content of the high voltage training. Finally this paper proposes the contents of training model divided into theory and practice.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 공동학술발표회
• /
• pp.35-35
• /
• 2017

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2015년도 추계학술대회
• /
• pp.224-226
• /
• 2015

Outwardly, the people in the shipping industry are aware that multicultural working environments and conditions could have a strong influence on the operation of ships. With a lack of cultural awareness and foreign language skill of crew members on ships, there are lots of misunderstandings and miscommunications among (cross-cultural) crews. More and more maritime accidents are caused by human error in the world's oceans. Nevertheless the research on cultural diversity and human interaction on ships is still in its infancy. Due to the rapid change of the demographic make-up of crews, not only teaching and training technical skills for the crews, but also education in nontechnical skills such as cultural awareness, cultural sensitivity, intercultural competence is urgently needed. This study will deal with intercultural issues on ships. It aims to emphasize the necessity of intercultural training in MET.

• 해양환경안전학회지
• /
• 제28권1호
• /
• pp.100-106
• /
• 2022

선박들은 목적에 따라 건조되어 개별의 목표를 가지고 운영된다. 운영상 목표는 선박의 설계에 반영되어 필요한 선박능력을 결정하는 주요 기준이 된다. 일반적으로 화물선과 여객선은 수송능력을 중심으로 선박의 운항부분과 화물 또는 여객의 수용능력부분으로 선박능력이 객관적으로 평가되고 있다. 필요한 선박능력을 감안하여 건조된 선박은 안정성과 같은 기본적인 특성 외에 경제성, 친환경성 등의 효과들 또한 기대 할 수 있다. 이에 따라 국내 해기사 양성에서 중추적인 역할을 하고 있는 각 기관의 실습전용선박 관리 분야에서도 선박능력 개념의 효과적인 활용이 기대된다. 본 연구에서는 최근 시차를 두고 건조된 한국해양수산연수원의 실습전용선박 2척의 선박내부 공간 분석을 통하여 실습전용선박의 선박능력 평가 기준에 대해 기초적인 방향성을 확인하였으며 국내의 실습전용선박 또는 범용 실습선박 건조 과정 중 예산확보와 설계에서 선박능력 기준의 활용 가능성을 도출하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권7호
• /
• pp.1051-1060
• /
• 2008

Now days, various types of ships are operated to transport both cargo and passengers all around the world. Most of the important auxiliary machinery installed in those ships is fluid machinery such as pumps, compressors, and fans. A large percentage of fluid machinery is pumps which are classified as turbo and positive displacement pumps. This paper analyzes only turbo pumps out of the two types. This thesis has two aims: (a) to analyze the present status of pumps installed in merchant and training ships and (b) to find the correlation among sea going pump kW, port pump kW, GE kW, ME MCR, number of pumps, ME kgf, pump kgf. Based on the ship's type, my paper seeks to find special characteristics as a result of analyzing head, flow rate, and kW. Moreover this paper analyzes and compares number of pumps, rpm of pumps, pump kW/ME MCR and pump kW/GE kW under the conditions of seagoing and berthing according to the ship's type. In conclusion, (1) For the exact comparison, information on the head, kW, flow rate, number of pumps by ship's type, the pump installation status of the Merchant Ships and Training Ships were tabulated and compared in this paper. (2) In order to qualify one ship as the delegate ship, several methods were used. The result of the examination indicates that the chosen ships could be justified as a suitable representation of ships of their own type. (3) The correlation of several values(total pump kW, port pump kW, GE kW, seagoing pump kW, pump weight, ME weight, ME MCR, number of pumps and ME kW) could be obtained.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권6호
• /
• pp.880-885
• /
• 2009

The ships have a lot of electric machinery needed to supply electricity from the moment of launching coming out of dry dock to docking at jetty. Thus, the ships always have to use alternator and electric machinery that has low efficiency under the low load. Many government service ships like the MMU training ship have been spending lots of time at jetty rather than sailing at sea. These ships are operated under the condition of low load due to the operation of basic machinery at jetty and electric machineries are driven with the status of low efficiency. This paper would suggest the energy saving method for these ships. The investigation describes that shore connection is a great asset to these ships and that the flow rate control by adjusting revolution with the adoption of inverter is better than flow rate control by using throttle valve to save energy. The result is based on the investigation of cooling pump at MMU training ship.