• 한국전산유체공학회지
• /
• 제17권1호
• /
• pp.36-43
• /
• 2012

When a high-speed train passes an underground station, large pressure waves are generated due to the piston effect. These pressure waves can cause the problems of vibration and noise as well as the ear discomfort of passengers at the underground station. This work numerically analyzed the pressure wave generation and propagation in an high-speed railway underground station, and the optimal location for vent shafts was studied to improve the passenger comfort by reducing the magnitude of the pressure wave and its rate of change. The evolution of pressure field in the underground station was calculated using a CFD(Computational Fluid Dynamics) software(Fluent), where the axis-symmetric two-dimensional model verified by Wu was used. And this study is applied to modelling of the underground station and the tunnel from Daegok station A-line of GTX(Great Train Express). From the result, we can have a conclusion that the role of vent shafts respectively were different according to the position in and out the underground station. Also Vent shaft in the underground station widely reduced pressure magnitude. And vent shaft out underground station reduced initial pressure peak value. Double vent shafts installed at tunnel toward station entrance and inside of the tunnel are the most efficient to reduce pressure. and pressure reduction increases according to the number of vent shaft.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6949-6958
• /
• 2015

무선통신기반 열차제어시스템은 관할영역 내에 운행 중인 열차의 위치정보를 지상시스템에서 실시간으로 수신하고 다시 각각의 열차의 차상시스템에 새로운 이동권한을 제공함으로써 안전한 간격제어를 수행한다. 열차제어시스템의 성능은 최소 운전시격으로 평가되며 그것은 열차제어시스템의 간격제어 성능뿐만 아니라 운영특성 그리고 열차의 특성을 반영하여 계산된다. 본 논문은 무선통신기반 열차제어시스템의 운전시격 계산과 운전시격을 개선하기 위한 새로운 열차간격제어 알고리즘을 제안한다. 제안된 운전시격 계산 방법은 열차제어시스템 간격제어 성능을 반영한 안전마진 추정을 통해 각각 역간 운전시격과 역 운전시격을 정의한다. 또한 제안된 열차간격제어 개선 알고리즘은 간격제어 개선을 위해 거리와 속도를 포함하는 이동권한을 새롭게 정의하며 선행열차에서 필연적으로 발생하는 제동거리를 이용함으로써 열차의 운전시격을 향상시킬 수 있다. 제안된 운전시격 계산방법을 한국형 무선통신기반 열차제어시스템의 간격제어 성능을 대상으로 시뮬레이션을 수행하며 개선된 열차간격제어 알고리즘과 비교분석 한다. 시뮬레이션 결과에 따르면 제안된 운전시격 계산방법은 향후 무선통신기반 열차제어시스템의 성능 지표로 활용이 가능하며 제안된 간격제어 알고리즘은 기존의 무선통신기반 열차제어시스템의 역 운전시격과 역간 운전시격을 개선할 수 있음을 확인한다.

• 한국철도학회논문집
• /
• 제9권6호
• /
• pp.766-771
• /
• 2006

Railway stations are important facilities for transport of passengers and freights. The location of station have an effect on the efficiency of railway transport and operation. In this study, an inspection of the primary factors for station spacing in urban railway has been performed and a review for the propriety of the present states and further improvement has been carried. It may be helpful for proper decisions on the route planning in urban railway. Primary factors for station spacing are 1)train capacity, 2)competitiveness with other transportation, 3)accessibility and 4)construction cost, which is out of consideration in the inspection. From the result of this study, the proper station spacing is about 600m for the accessibility, more over 1.03km for the train capacity and more over 1.4km for the competitiveness with other transportation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.88-91
• /
• 2007

Turnout system is a mechanical installation enabling trains to be guided from one track to another which is consists of point blades, common crossing and guard rail etc. These structural feature causes vibration, noise and damages while railroad car wheel is passes by. A tilting train is a train with a tilting mechanism that enables increased speed on regular railroad tracks. The aim of this paper is to study a characteristics of the shock-vibration and noise of tilting and existing train passes by turnout systems. To analyze and assesment, noise and vibration measurement was carried out at the Naesu-station of Chungbuk-line which equipped with cast manganese crossing and built-up crossing and Illo-station of Honam-line which equipped with cast manganese crossing.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.496-500
• /
• 2010

Understanding train-wind is the best method to know how to optimize subway ventilation system. The capacity and efficiency of the subway ventilation system are known by pressure and velocity while train runs. Analysis of the internal flow in subway tunnel and around subway station are studied using numerical methods. Characteristics of internal flow and influence of subway ventilation system for the subway station with platform screen door and tunnel are analyzed by unsteady state analysis. Velocity and pressure of train wind transformation are compared at around subway ventilation system and the internal flow is investigated at the subway tunnel.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.523-528
• /
• 2011

Subway becomes more and more main transportation in major cities. Air pollution in the subway platforms is decreased; however, dust flow inside subway tunnel and train is increased by installing Platform Screen Door. Airflow inside subway tunnel is observed using computational method in this study The airflow characteristics around ventilation shafts and inside the tunnel is studied following the train movement, while the train moves from existing Miasamgeori station to Gireum station ANSYS CFX V12.0.l and ICEM CFD V12.0.l are used to compute the airflow inside the subway tunnel.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.2017-2022
• /
• 2009

Sinbundang Line(SBL) Train moves the transition zone where is located between Jeongja station and Migeum station switched over from Communication Based Train Control (CBTC) system area to Automatic Train Control (ATC) system area and viceversa. The SBL train to move the between SBL and Bundang Line is needed to install the Specific Transmission Module (STM) on SBL Line for interface with Bundang Line; STM receives from speed code from Bundang Line. So we suggested the method to ensure mutual compatibility and reliability for train operation on each other signaling system.

• 전기학회논문지
• /
• 제63권6호
• /
• pp.834-840
• /
• 2014

When the high speed train (KTX) departs from station in the high-speed line, intermittent on-board signal disappearance causes a hindrance of the operation punctuality. Therefore, we have a research objective to verify the causes of hindrance and to find an improvement plan. process of research, when train leaves the station, we applied sand on the rail to improve adhesive power, that sand has an effect on the ATC(Automatic Train Control) signal wave. We detected & analyzed signal waves which is came from detecting device by changing operation condition in accordance with sand material overage detection to be achieved.

• 한국멀티미디어학회논문지
• /
• 제23권8호
• /
• pp.1118-1127
• /
• 2020

Train to Busan(2016) and Seoul Station(2016) contain trans-media properties in terms of the expansion of 'possible worlds' from the original story, and show the cultural and economic potential of the domestic trans-media contents with industrial systems added to the artist's competence of Dir. Yeon Shang-ho, an animator and film director. But they also have limits of the lack of continuity in time and characters between each media, various derived contents and suitable marketing strategy. For the development of Korean trans-media contents, it is necessary to extend the range of contents, find changes in production time and style, and improve the distribution environment to encourage a user to integrate contents from each platforms.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권3호
• /
• pp.195-202
• /
• 1999

This study present the stability of middle slabs directly supporting train loads in the subway station. According to results of Quality confirmation, mixing and curing conditions are good. But, when effects of hydration heat are analyzed, cracks seems to take place because tensile stress is higher than tensile strength in several points of middle slabs. It is found that vibration by train running don't have an effect on cracks in the structure. The structural analysis shows that there is no problem on the stability of structural body, but the design through 3-dimensional analysis is need to consider columns and opening specially in the subway station structures.