• The Journal of the Convergence on Culture Technology
• /
• 제6권4호
• /
• pp.825-831
• /
• 2020

In modern society, automobiles have become an essential means of transportation. It is the only consumable that is worn by contacting the ground among automobile parts. If the tyres are severely worn, the tyres may be break, presenting a risk of a serious accident to the driver. To avoid this risk, drivers should check tyre pressure and tread condition before driving a car. Tyre inflation pressure can be easily measured by TPMS, but in the case of tyre tread conditions, it can be cumbersome when the driver measures it directly using a coin or vernier caliper. This hassle can expose the driver to traffic accidents due to tyre breakage by neglecting to measure the condition of the tyre tread. In this paper, we introduce the contents of research to design an IoT service-based system that can automatically measure automobile tyres, and we verified the possibility of realizing the system by actually implementing and testing some components of the system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제16권6호
• /
• pp.29-41
• /
• 2017

In this study, we used individual trip data to estimate a macroscopic fundamental diagram (MFD) that relates flow (or production) to density (or state) in Daegu metropolitan city. The individual trip data were generated by processing data that were collected from DSRC-based (dedicated short range communication) traffic data collection system. Using the processed individual trip data, we first examined whether the assumptions for MFD are valid, and then the relation between outflow and accumulation was estimated in our study site. As a result, we found that i) the assumptions are valid to construct MFD; and ii) the reproducible and well-defined MFDs exist in the network level.

• Journal of Communications and Networks
• /
• 제18권4호
• /
• pp.540-550
• /
• 2016

Since energy efficiency has become a significant concern for network infrastructure, next-generation network devices are expected to have embedded advanced power management capabilities. However, how to effectively exploit the green capabilities is still a big challenge, especially given the high heterogeneity of devices and their internal architectures. In this paper, we introduce a hierarchical power management architecture (HPMA) which represents physical components whose power can be monitored and controlled at various levels of a device as entities. We use energy aware state (EAS) as the power management setting mode of each device entity. The power policy controller is capable of getting information on how many EASes of the entity are manageable inside a device, and setting a certain EAS configuration for the entity. We propose the optimal local control policy which aims to minimize the router power consumption while meeting the performance constraints. A first-order Markov chain is used to model the statistical features of the network traffic load. The dynamic EAS configuration problem is formulated as a Markov decision process and solved using a dynamic programming algorithm. In addition, we demonstrate a reference implementation of the HPMA and EAS concept in a NetFPGA frequency scaled router which has the ability of toggling among five operating frequency options and/or turning off unused Ethernet ports.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제23권4호
• /
• pp.371-380
• /
• 2020

Video is principal information that facilitates commander's immediate command decision. Due to fading characteristics of radio link, however, it is difficult to stably transmit video in a multi-hop wireless environment. In this paper, we propose a MANET structure composed of a link adaptive routing protocol and a TDMA MAC protocol to stably transmit video traffic in a ultra-narrowband video streaming network. The routing protocol can adapt to link state change and select a stable route. The TDMA protocol enables collision-free video transmission to a destination using multi-hop dynamic resource allocation. As a result of simulation, the proposed MANET structure shows better video transmission performance than proposed MANET structure without link quality adaption, AODV with CSMA/CA, and OLSR with CSMA/CA structures.

• Journal of Satellite, Information and Communications
• /
• 제6권2호
• /
• pp.72-77
• /
• 2011

Spectrum sensing is a critical functionality of CR network; it allow secondary user to detect spectral holes and to opportunistically use under-utilized frequency bands without causing harmful interference to primary use. Recently, wideband service has been increase for processing abundance of data traffic. So CR network needs a realizable implementation design of spectrum sensing for wideband. To get high resolution performance of wideband sensing must precede algorithm processing for reliability signal detection. By the way, the performance of spectrum sensing can be degraded due to fading and shadowing. In order to overcome this problem, we propose system model of wideband sensing scheme on energy detected collaborative technique. we divide wideband into narrowbands and use narrowbands to detect signal excepting some narrowbands including bad channel through the CSI. And we simulate and analyze in terms of detection probability with various SNR.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제7권3호
• /
• pp.139-146
• /
• 2003

The objective of the presented study is to develop an efficient procedure of proof load testing for existing bridges. By analytical methods, some of these bridges are not adequate to carry normal highway traffic. However, the actual load carrying capacity is often much higher than what can be determined by conventional analysis. Proof load testing can reveal the hidden strength reserve and thus verify the adequacy of the tested bridge. Proof load level required for meaningful tests should be sufficiently higher than legal load. In the state of Michigan, the legal 11-axle truck can weigh up to 685 kN. In this study, a combination of two military tanks and two Michigan 11-axle trucks was used. The proof loads were gradually increased to ensure the safety of the test. After each move, measurements were taken. For the considered bridge, stress levels were rather low compared to pre-test analysis results. This is due to incorrect material strength, structural contribution of nonstructural components such as parapets and railings, and partially fixed supports.

• The KIPS Transactions:PartC
• /
• 제8C권6호
• /
• pp.865-874
• /
• 2001

In this paper, we have designed and implemented Web based Home Phoneline Neworking Aliance(Home PNA)device management, system which can resolve the unfair bandwidth service form may subscribers and manage subscribes using these devices. To manage Home PNA device with Simple Network Management Protocol(SNMP) management elements are classified into system. Port performance, fault functional area based on Management Information Base(MIB) objects from Multi Dwelling Unit(MDU) devices MIB. System management provides configuration information of each MDU devices, and port management provides the current state of subscribes and performs filtering operation against the unauthorized users. And performance management provides traffic information about trunk and subscriber lines. Finally fault management provides fault logging fo the unexpected events and trap message from devices To verify the operability of the proposed system, we have tested it in real network environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제22권4호
• /
• pp.855-869
• /
• 1997

In this paper, we proposed two kids of dynamic priority control mechanisms controlling the cell service ratio in order to improve the QOS(Quality of Service). We also analyse theoretically the characteristics of cell loss probability and mean cell delay time by applying the proposed priority control mechanisms to ATM switch with output buffer. The proposed priority control mechanisms have the same principles of storing cells into buffer but the different principles of serving cells from buffer. The one is the control mechanism controlling the cell service ratio according to the relative cell occupancy ratio of buffer, the other is the control mechanism controlling the cell service ratio according to both the relative cell occupancy ratio of buffer and the average arrival rate. The two service classes of our concern are the delay sensitive class and the loss sensitive class. The analytical results show that the proposed control mechanisms are able to improve the QOS, the characteristics of cell loss probability and mean cell delay time, by selecting properly the relative cell occupancy ratio of buffer and the average arrival rate. conventional DLB algorithm does not support synchronous cells, but the proposed algorithm gives higher priority to synchronous cells. To reduce synchronous cell loss rate, the synchronous cell detector is used in the proposed algorithm. Synchronous cell detector detects synchronous cells, and passes them cells to the 2nd Leaky-Bucket. So it is similar to give higher priority to synchronous cells. In this paper, the proposed algorithm used audio/video traffic modeled by On/Off and Two-state MMPP, and simulated by SLAM II package. As simulation results, the proposed algorithm gets lower synchronous cell loss rate than the conventional DLB algorithms. The improved DLB algorithm for multimedia synchronization can be extended to any other cells which require higher priority.

• Fire Science and Engineering
• /
• 제18권2호
• /
• pp.49-56
• /
• 2004

Today's popular ventilation systems include the combined jet fans and electrostatic precipitation systems or the combined jet fans and vertical shaft system. Tunnels with these two ventilation systems applied have been designed and opened, more and more interest has been put in maintenance of a tunnel after opening. Therefore. it is to become more important to come up with the optimal operation mode and the method for the evaluation of ventilation system. In this study, to evaluate a tunnel ventilation and its economy, a dynamic simulation program was developed which can simulate the unsteady-state tunnel air velocity and concentration of pollutants according to the traffic flow variations and operation condition of a ventilation system. We clarified the effectiveness usage on tunnel ventilation by using it and also we could found the most economical ventilation operation mode by application in real exit tunnel. We obtained that combination of fan system and electrostatic precipitation system was more economical than jet fan priority operation mode.

• The Journal of the Korea Contents Association
• /
• 제3권2호
• /
• pp.65-72
• /
• 2003

In this paper, the new scheme using a Combined Cache(CC) that combing the Paging and Routing Cache(PRC) and an alternative handoff method according to the type of data transmission for achieving the efficient realtime communication. The PRC and quasi-soft handoff method reduce the path duplication. But they increase the network traffic load because of the handoff state packet of Mobile Host(MH). Moreover the use the same handoff method without differentiating the type of transmission data. Those problems are solved by operating U with a semi-soft handoff method for realtime data transmission and with a hard handoff method for non-realtime data transmission. As a result or simulation a better performance is obtained because of the reduction of the number of control packet in case that the number of cells are below 20. And the packet arrival time and loss of packet decreased significantly for realtime data transmission.