• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.2
• /
• pp.3-8
• /
• 2009

The traction system has been mainly used for rehabilitation and correction of patients with spine or gait diseases in orthopedics or at home. Some problems could occur in human body when patients forced their training using the traction system. So it needs to measure a traction force and control the training time. However, most of products on market have no sensor measuring traction force. Thus we designed and made a sensor detecting traction force using strain gauge, amplifier for transition to output signal and experiment devices for performance test. We carried out experiment of a sensor detecting a traction force and measured electric responses of it with respect to traction loads. Maximum error was within about 1% for experiments in static condition and the average error was about 0.7% for experiments in dynamic condition. We concluded that it is possible to use the developed sensor for measurement of traction force since the maximum output variation of a sensor detecting a traction force was about 0.3% in $0^{\circ}C-60^{\circ}C$ temperature condition.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.439-442
• /
• 1999

In this paper presents a modeling method for simulation of Tration Motor using Matlab/Simulink This model is well adopted in the traction motor and speed, torque estimation. This model consist o IM(induction motor) block, Load block and controller blocks. This paper use the indirect vecto control Because improve accuracy speed characters. The result show the better speed and torque characters. And effectiveness of Matlab/Simulink in simulations.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.118-121
• /
• 1999

In this pager, we studies IGBT VVVF inverter for 1C4M propulsion system of railway traction. This inverter is consisted in inverter stack, DB unit, and control unit. To prove performance of inverter carry out combine test. This test verifies that performance of inverter is excellent.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.659-660
• /
• 2008

This paper presents a hybrid winding connection method for torque characteristics improving of a traction SRM. In order to get a high torque in wide speed range and torque ripple reduction, series and parallel winding connection are changed according to operating speed. From the analysis of torque character operation mode and efficiency, the proposed control scheme is verified.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.29-32
• /
• 2002

The developed locomotive in coal mine drawn by the parallel drive system of the double Switched Reluctance motors is introduced. The operational principles, the control pattern and the component parts of the traction and the regenerative braking operation are proposed. The drive system contributes to reduce the cost of utilization of the locomotive per ton kilometer.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.797-801
• /
• 1998

This paper presents a balanced 3/1 supply scheme for electric railway. By employing an active filter, the current of the three-phrase delivery system is balanced while the load is single phrase, which makes it possible for the traction system to behave like a pure-resistance load, with unity power factor and no harmonics. Simulation results are present to verify the scheme's topology and control strategies.

• Journal of the Korean Society for Railway
• /
• v.3 no.1
• /
• pp.1-11
• /
• 2000

In this paper, the IGBT VVVF inverter for 1C4M propulsion system of railway traction is studied. The inverter is consisted of IGBT stacks, a DB unit, and a control unit. The test results of the combined system is given, which shows an excellent performance of the overall system.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.186-189
• /
• 2004

Switched reluctance machine has much attention because of high efficiency, high power and DC series torque characteristics with a traction drive. But the motor has to have a regenerative mode when it is adopted in an electric vehicle. A current divergence during the regeneration makes difficulties in the control of SRM. This paper proposes a reference current limitation strategy for a stable regeneration based on simulations and experimental tests. The motor is operated with conventional current limit and switching angle control method in motoring mode. Simulations and experiments are executed to verify proposed method.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.3
• /
• pp.360-365
• /
• 2012

Cascaded H-Bridge rectifier (CHBR) is a more attractive solution in traction application for its transformerless structure. Because of the currents of different cells are exactly the same one, it is a challenge job to regulate the voltages of cells with only one current controller. In this paper, a PI-based control scheme is presented to deal with the voltages balance issue in CHBR. To satisfy the demand of rectifier such as unity power factor and regulated output DC voltages, the proposed control scheme consists of two parts. One is for shaping the grid current waveform and regulating the sum of DC-link voltages of all the cells; the other one is for balancing DC-link voltages. The latter is more concerned in this paper and is discussed in detail especially. Simulations and experiments are carried on. The results verified the feasibility and effectiveness of the proposed scheme.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.381-383
• /
• 1998

The dynamics of the interaction between the wheel and rail must be considered when investigating the application of control strategy to a traction motor for high speed railway system. So this paper describes a dynamics model of the wheel rail adhesion characteristics and simple adhesion control strategy. Simulations are performed on the model of korea-high speed railway system using SIMULINK. With simple adhesion control strategy advanced characteristics of the system is showed in aspects of driveability.