• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.103-112
• /
• 2010

In this paper, we propose a coarse and fine frequency synchronization method which is suitable for the 3GPP(3rd Generation Partnership Project) LTE(Long Term Evolution) FDD(Frequency Division Duplexing) / TDD(Time Division Duplexing) dual mode system. In general, PSS(Primary Synchronization Signal) correlation based estimation method and CP(Cyclic Prefix) correlation based tracking loop are applied for coarse and fine frequency synchronization in 3GPP LTE OFDMA(Orthogonal Frequency Division Multiple Access) system, respectively. However, the conventional coarse frequency synchronization method has performance degradation caused by fading channel and squaring loss. Also, the conventional fine frequency synchronization method cannot guarantee stable operation in TDD mode because of signal power difference between uplink and downlink subframe. Therefore, in this paper, we propose enhanced coarse and fine frequency synchronization methods which can estimate more accurately in multi-path fading channel and high speed channel environments and has stable operation for TDD frame structure, respectively. By computer simulation, we show that the proposed methods outperform the conventional methods, and verify that the proposed frequency synchronization method can guarantee stable operation in 3GPP LTE FDD/TDD dual mode downlink receiver.

• 대한방사선치료학회:학술대회논문집
• /
• 2005.06a
• /
• pp.13-17
• /
• 2005

Introduction : For stereotactic radiosurgery (SRS) of a tumor in the region whose movement due to respiration is significant, like Lung lower lobe, the gated therapy, which delivers radiation dose to the selected respiratory phases when tumor motion is small, was peformed using the Respiratory gating system and its clinical effectiveness was evaluated. Methode and Materials : For two SRS patients with a tumor in Lung lower lobe, a marker block (infrared reflector) was attached on the abdomen. While patient' respiratory cycle was monitored with Real-time Position Management (RPM, Varian, USA), 4D CT was performed (10 phases per a cycle). Phases in which tumor motion did not change rapidly were decided as treatment phases. The treatment volume was contoured on the CT images for selected treatment phases using maximum intensity projection (MIP) method. In order to verify setup reproducibility and positional variation, 4D CT was repeated. Result : Gross tumor volume (GTV) showed maximum movement in superior-inferior direction. For patient $\#$1, motion of GTV was reduced to 2.6 mm in treatment phases ($30\%\~60\%$), while that was 9.4 mm in full phases ($0\%\~90\%$) and for patient $\#$2, it was reduced to 2.3 mm in treatment phases ($30\%\~70\%$), while it was 11.7 mm in full phases ($0\%\~90\%$). When comparing two sets of CT images, setup errors in all the directions were within 3 mm. Conclusion : Since tumor motion was reduced less than 5 mm, the Respiratory gating system for SRS of Lung lower lobe is useful.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.9
• /
• pp.661-674
• /
• 2009

Recently, there has been much research and many attempts to enhance converged information technology services using new technology such as ubiquitous sensor networks (USN) in medical, environmental, industrial, and logistic areas. There has also been much research and various attempts to apply this new technology to agricultural areas. However, applications to the agricultural areas should be considered differently against the same areas such as medical, environmental, industrial, and logistics. Therefore, this paper suggests that an agricultural cultivating management and traceability system. This system is a unified system that supports the processes sowing seeds through selling agricultural products to consumers. Farmers can be provided with an effective calendar for cultivation and weather information in real time as well as the monitoring of the growth of farm products on the farm in real time using this system. Farmers can also control all equipment installed on the farm directly or remotely and the equipment can be controlled automatically when the measured values such as temperature and humidity deviate from the decent criteria which are set by farmers or this system. Additionally, the reliability for and the better quality of the agricultural products can be improved because farmers can use this unified system to cover all processes from sowing seeds to selling to consumers.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.12
• /
• pp.55-64
• /
• 2013

In this paper, the HILS (Hardware In-the-Loop Simulation) system to analyze and to verify the performance of the targeting pod is addressed. The main functions of the targeting pod is acquiring and tracking targets to guide a LGB (Laser Guided Bomb) to the targets. For the analysis of targeting pod, the real time simulate images generation of IR and daylight cameras, sever control technology, and the analysis of laser transfer characteristics are necessary. For the real time image generation and the laser transfer characteristics analysis, off-the-shelf SDK(Software Development Kit) OKTAL-SE is used. For the servo controller, well-proven mechanism in the previous program is applied to increase servo control accuracy. To analyze the performance of a targeting pod in a realistic environment, 1553B, ARINK818 interface and etc. which are actually implemented in real combat aircrafts are applied in the system. By using the developed HILS system, the performance of currently operating targeting pods in real combat aircrafts can be analyzed and predicted. Additionally, the relationship between overall system performance and each module performance can be analyzed, the currently developed HILS system is expected to be a very useful tool to generate system development requirements of targeting pods and to reduce any possible future development risks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.523-533
• /
• 2019

The convergence of engineering and IT technology has brought many changes to the industry as well as academic research. In particular, computer simulation technology has evolved to a level that can accurately simulate actual physical phenomena and analyze them in real time. In this paper, we describe the CFD technology, which is mainly used in industry, and the post processor that uses the augmented reality which is emerging as the post-processing. Research on the visualization of fluid simulation results using AR technology is actively being carried out. However, due to the large size of the result data, it is limited to researches that are published in a desktop environment. Therefore, it is limitation that needs to be reviewed in actual space. In this paper, we discuss how to solve these problems. We analyze the fluid analysis results in the post-processing, and then perform optimizing data (more than 70%)to support operation in the mobile environment. In the visualization, lightweight data is used to perform real-time tracking using cloud computing, The analysis result is matched to the screen and visualized. This allows the user to review and analyze the fluid analysis results in an efficient and immersive manner in the various spaces where the simulation is performed.

• Korean Journal of Environment and Ecology
• /
• v.36 no.2
• /
• pp.202-216
• /
• 2022

Animals exhibit certain behaviors and movement patterns as they react to their internal needs, external stimuli, and surrounding environments. They have a bounded range in which they mostly spend their time, and it is referred to as a home range. Based on the fact that the home range is a critical area for the survival and preservation of species, there has been a growing body of research on developing more precise home range estimation methods to use the estimated ranges as a ground for establishing an effective conservation policy since the early 1940s. Recent rapid advancements in telemetry technology that resulted in the presence of autocorrelation between locations with short time intervals revealed the limitations of the existing estimators. Many novel estimators have been developed to compensate for it by incorporating autocorrelation in calculating home ranges. However, studies on the animal home range are still in their early stage in Korea, and newly developed methodologies have not yet been adopted. Therefore, this study aims to introduce the foreign home range estimation methods and foster domestic research activities on home ranges. Firstly, we compared and contemplated seven estimators by categorizing them into geometrical and statistical methodologies and then divided them into estimators that assume independent observations and those that consider autocorrelation in each category. After that, the home ranges of black-tailed gulls (Larus crassirostris) were calculated using GPS tracking data for the month of June and derived home range estimators by applying the methodology introduced in this study. We analyzed and compared the results to discuss the strengths and weaknesses of each method. Lastly, we proposed a guideline that can help researchers choose an appropriate estimator for home range calculation based on the animal location data characteristics and analysis purpose.

• Journal of the Korea Computer Graphics Society
• /
• v.28 no.5
• /
• pp.1-11
• /
• 2022

Game engines have the advantage of enabling efficient content production, such as reducing development time, with minimal visual quality guarantees and support for multi-platforms. Recently, game engines have provided various functions that can easily, quickly, and effectively produce immersive content using virtual reality (VR) HMD. Therefore, this study conducts a comparative study on the development environment in VR content production using Oculus Quest 2 HMD, focusing on Unity and Unreal game engines, which are widely used in the content production industry, including games. First, we compare the basic setup process of building a development environment using Oculus Quest 2 HMD and a dedicated controller based on a VR template project that includes the minimum functions and settings provided by each engine. Next, we present a simple experience environment that can interact in a virtual environment and compare the development environment to use a dedicated controller and the process of building a development environment that directly utilizes hands through the hand tracking function provided by Oculus Quest 2. Through this process, we will understand the basic process of building a VR development environment, and at the same time, we will check the characteristics and differences of the engine and use it as a research that can be applied to various immersive content production.

• Journal of Industrial Convergence
• /
• v.21 no.4
• /
• pp.165-170
• /
• 2023

There are cases where the mobility impaired have difficulty moving from the moment they leave the house. If guardians also do not have time to entrust their families, who are socially disadvantaged, to a shelter, the guardian has no choice but to check directly in order to know the location of the guardian. The AI home care solution was designed to relieve the anxiety and labor of caregivers and to provide convenience for protection facility officials and users. If more facilities distribute and use services free of charge to non-profit foundations and protective facilities, the concern of guardians will be reduced, and the burden of facility officials who have to manage facility users will be reduced. In this paper, we provide emergency notification services to guardians in the event of an emergency as well as location and status alarms for guardians, which are all data related to movement, in consideration of the mobility vulnerable. Furthermore, it is necessary to provide a service function that recommends the optimal route using a navigation function to ease the convenience and burden of facility officials. It is necessary to alleviate anxiety by providing necessary information to the guardian, such as the location of the shuttle used by the mobile weak and the time of getting on and off. In addition, while providing services for free, the goal is to improve the quality of service for facility managers and the quality of service for the mobility weak.

• Health Policy and Management
• /
• v.33 no.3
• /
• pp.243-252
• /
• 2023

This paper aims to introduce Korea's total current health expenditure (CHE) and National Health Accounts of the year 2021 and their 2022 preliminary figures constructed on the basis of the System of Health Accounts 2011. As CHE includes expenditures for prevention, tracking, and treatment of coronavirus disease 2019 (COVID-19) and compensation for losses to medical institutions from 2020, the details are also introduced. Korea's total CHE in 2021 is 193.3 trillion won, which is 9.3% of gross domestic product (GDP). The preliminary figure in 2022, 209.0 trillion won, exceeded the 200 trillion won line for the first time, and its "ratio to GDP" of 9.7% is expected to exceed the average of Organisation for Economic Co-Operation and Development member countries for the first time. Korea's health expenditures, which were well controlled until the end of the 20th century, have increased at an alarming rate since the beginning of the 21st century, threatening the sustainability of national health insurance. The increase in health expenditure after 2020 is partly due to a temporary increase in response to COVID-19. However, when considering the structure of Korea's health insurance price hike, where the ratchet effect of increased medical expenses works particularly strongly, it is unlikely that the accelerating growth trend that has lasted for more than 20 years will stop easily. More aggressive policies to control medical expenses are required in the national health insurance which not only constitutes the main financing sources of the Korean health system but also has the most powerful policy means in effect for changes in the health care provision.

• Korean Journal of Environmental Biology
• /
• v.40 no.3
• /
• pp.247-254
• /
• 2022

To investigate the tolerance limit and critical thermal maximum (CTM), behavioral responses of wild goldeye rockfish Sebastes thompsoni according to exposure to high water temperature were observed using a continuous behavior tracking system. As a result, behavioral index (BI) of S. thompsoni in each temperature (20.0, 25.0, and 30.0℃) showed a significant difference (p<0.05) when compared with the value measured in a stable condition of 15.0℃. The activity level of S. thompsoni exposed to 25.0℃ decreased sharply after 20 hours. Their rest time at the bottom of experiment chamber increased, and their normal swimming and metabolic activities were disturbed. In addition, at a high water temperature of 30.0℃, S. thompsoni reached the limit of resistance and showed a sub-lethal reaction of swimming behavior, with energy consumption in the body increased and all test organisms died. In conclusion, the eco-physiological response of S. thompsoni to water temperature varied greatly depending on the fluctuation range of the exposed temperature and the exposure time. In addition, the tolerance limit of S. thompsoni to high water temperature was predicted to be 25.0-30.0℃. The maximum critical thermal that had a great influence on the survival of this species was found to be around 30.0℃.