• 한국철도학회논문집
• /
• 제8권2호
• /
• pp.111-115
• /
• 2005

The Study provides the technical background and calculation method f3r the long wave track defect. On high speed railway, It is necessary to manage the long wave band up to 80m track defect fur improving a riding quality. For this reason, Track recording methods for highspeed railway are used 10m and 30m recording bases, these are covered middle wave band and long wave band successfully. Extended base recording data is calculated by geometrical model and this data provides a good result for KTX riding index.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.370-375
• /
• 2005

Floating sleepers in a ballasted track increase both track deterioration and track irregularities. Consequently, a considerable maintenance work is required and maintenance cycle is shortened due to the floating sleepers. This paper quantifies the degrees of void between the floating sleepers and a ballast bed. In the future, the influence of floating sleepers on the track will be investigated by an analytical method using a dynamic model.

• Wind and Structures
• /
• 제29권3호
• /
• pp.149-161
• /
• 2019

When a railway vehicle runs in crosswinds, the unsteady aerodynamic forces acting on the train induced by the vehicle speed, crosswind velocity and local landforms are a common problem. To investigate the dynamic performance of a railway vehicle due to the influence of unsteady aerodynamic forces caused by local landforms, a vehicle aerodynamic model and vehicle dynamic model were established. Then, a wind-loaded vehicle system model was presented and validated. Based on the wind-loaded vehicle system model, the dynamic response performance of the vehicle, including safety indexes and vibration characteristics, was examined in detail. Finally, the effects of the crosswind velocity and vehicle speed on the dynamic response performance of the vehicle system were analyzed and compared.

• Steel and Composite Structures
• /
• 제47권1호
• /
• pp.91-102
• /
• 2023

To study the evaluation standard and control limit of mortar filling layer void length, in this paper, the train sub-model was developed by MATLAB and the track-bridge sub-model considering the mortar filling layer void was established by ANSYS. The two sub-models were assembled into a train-track-bridge coupling dynamic model through the wheel-rail contact relationship, and the validity was corroborated by the coupling dynamic model with the literature model. Considering the randomness of fastening stiffness, mortar elastic modulus, length of mortar filling layer void, and pier settlement, the test points were designed by the Box-Behnken method based on Design-Expert software. The coupled dynamic model was calculated, and the support vector regression (SVR) nonlinear mapping model of the wheel-rail system was established. The learning, prediction, and verification were carried out. Finally, the reliable probability of the amplification coefficient distribution of the response index of the train and structure in different ranges was obtained based on the SVR nonlinear mapping model and Latin hypercube sampling method. The limit of the length of the mortar filling layer void was, thus, obtained. The results show that the SVR nonlinear mapping model developed in this paper has a high fitting accuracy of 0.993, and the computational efficiency is significantly improved by 99.86%. It can be used to calculate the dynamic response of the wheel-rail system. The length of the mortar filling layer void significantly affects the wheel-rail vertical force, wheel weight load reduction ratio, rail vertical displacement, and track plate vertical displacement. The dynamic response of the track structure has a more significant effect on the limit value of the length of the mortar filling layer void than the dynamic response of the vehicle, and the rail vertical displacement is the most obvious. At 250 km/h - 350 km/h train running speed, the limit values of grade I, II, and III of the lengths of the mortar filling layer void are 3.932 m, 4.337 m, and 4.766 m, respectively. The results can provide some reference for the long-term service performance reliability of the ballastless track-bridge system of HRS.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.816-816
• /
• 2009

In order to attenuate structural waves in railway track, damped mass-spring absorber system and spring supported system are considered that are attached continuously along the beam length. A mathematical model is presented for the propagation of structural waves on a finitely long, periodically supported classical beam. The model in this paper could represent a railway track where the beam represents the rail and an appropriately chosen support type represents the pad/sleeper/ballast system of a railway track. And in this study, it is presented that the measurement method of health monitoring of railway track.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.376-380
• /
• 2002

In this paper, we developed a Widows 98 version off-line programming system which can simulate a track vehicle model in 3D graphics space. The track vehicle was adopted as an objective model. The interface between users and the off-line program system in the Widows 98's graphic user interface environment was also studied. The developing language is Microsoft Visual C++. Graphic libraries, OpenGL, by Silicon Graphics, Inc. were utilized for 3D Graphics.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.310-316
• /
• 2004

In this paper, we developed a Windows XP version off-line programming system which can simulate a track vehicle model in 3D graphics space. The track vehicle was adopted as an objective model. The interface between users and the off-line program system in the Windows XP's graphic user interface environment was also studied. The developing language is Microsoft Visual C＋＋. Graphic libraries, OpenGL, by Silicon Graphics, Inc. were utilized for 3D Graphics.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.197-201
• /
• 2001

In this paper, we developed a Windows 98 version of-line programming system which can simulate a track vehicle model in 3D graphics space. The track vehicle was adopted as an objective model. The interface between users and the off-line program system in the Windows 98's graphic user interface environment was also studied. The developing language is Microsoft Visual C++. Graphic libraries, OpenGL, by Silicon Graphics, Inc. were utilized for 3D Graphics.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.666-671
• /
• 2000

In this paper, we developed a Windows 95 version off-line programing system which can simulate a track vehicle model in 3D graphics space. The track vehicle was adopted as an objective model. The interface between users and the off-line program system in the Windows 95's graphic user interface environment was also studied The developing language is Microsoft Visual C++. Graphic libraries, OpenGL, by Silicon Graphics, Inc. were utilized for 3D Graphics.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.125-129
• /
• 2000

In this paper, re developed a Window 98 version off-line programming system which can simulate a track vehicle model in 3D graphics space. The track vehicle was adopted as an object model. The interface between users and the off-line program system in the Window 98's graphic user interface environment was also studied The developing language is Microsoft Visual C++. Graphic libraries, OpenGL, by Silicon Graphics, Inc. were utilized far 3B Graphics.