• 비파괴검사학회지
• /
• 제26권1호
• /
• pp.1-6
• /
• 2006

폐수처리시설의 응집조를 대상으로 0.392MeV의 감마선을 방출하는 In-113m을 추적자로 이용하여 체류시간분포(RTD; residence time distribution)를 측정하였다. 계측 결과는 CFSTR (constant flow stirred tank reactor) 모델을 바탕으로 구축한 K-RTD 프로그램을 이용하여 수학적으로 분석하였으며, 이를 바탕으로 혼합 특성을 규명하고자 하였다 모델에 의한 시뮬레이션 결과를 계측결과와 맞추는 과정에서 유체 거동의 특성을 표현하는 인자들을 계산하였으며, 이들 인자에 의한 시뮬레이션 결과는 실험결과에 매우 성공적으로 부합하였다. 또한 향후 본 실험에서 관찰된 bypass flow의 성분을 이론적 모델에 포함시키고 이를 분석하며 혼합조의 효율에 영향을 미치는 요소들에 대한 추가 연구의 필요성을 확인하였다.

• Asian Journal of Atmospheric Environment
• /
• 제11권2호
• /
• pp.79-95
• /
• 2017

A number of field studies have provided evidence that biomass burning is one of the major global sources of atmospheric particles. In this study, we have collected $PM_{2.5}$ emitted from biomass burning combusted at open burning and laboratory chamber situations. The open burning experiment was conducted with the cooperation of 9 farmers in Chiba Prefecture, Japan, while the chamber experiment was designed to evaluate the characteristics of chemical components among 14 different plant species. The analyzed categories were $PM_{2.5}$ mass concentration, organic carbon (OC), elemental carbon (EC), ionic components ($Na^+$, ${NH_4}^+$, $Ca^{2+}$, $Mg^{2+}$, $K^+$, $Cl^-$, ${NO_3}^-$ and ${SO_4}^{2-}$), water-soluble organic carbon (WSOC), water-insoluble inorganic carbon (WIOC), char-EC and soot-EC. OC was the dominant chemical component, accounting for the major fraction of primary $PM_{2.5}$ derived from biomass burning, followed by EC. Ionic components contributed a small portion of $PM_{2.5}$, as well as that of $K^+$. In some cases, $K^+$ is used as biomass burning tracer; however, the observations obtained in this study suggest that $K^+$ may not always be suitable as a tracer for biomass burning emissions. Also, the results of all the samples tested indicate relatively low values of char-EC compared to soot-EC. From our results, careful consideration should be given to the usage of $K^+$ and char-EC as indicators of biomass burning. The calculated ratios of WSOC/OC and WIOC/OC were 55.7% and 44.3% on average for all samples, which showed no large difference between them. The organic materials to OC ratio, which is often used for chemical mass closure model, was roughly estimated by two independent methods, resulting in a factor of 1.7 for biomass burning emissions.

• 한국수소및신에너지학회논문집
• /
• 제29권2호
• /
• pp.219-225
• /
• 2018

This study was carried out to investigate the injection characteristics of 800 kPa compressed natural gas compressed natural gas (CNG) injector developed in Korea. The CNG injector with multi-holes, employed in this experiment, was designed to inject CNG in the manifold at high pressure of 800 kPa. The spray macroscopic visualization test was carried out via Schlieren photography to study fuel-air mixing process. The fundamental spray characteristics, such as spray penetration, spray cone angle and spray velocity, were evaluated in the constant volume combustion chamber (CVCC) with varying the constant back pressure in CVCC from 0 to 1.8 bar. For the safety reason, nitrogen ($N_2$) and an acetone tracer were utilized as a surrogate gas fuel instead of CNG. The surrogate gas fuel pressures were controlled at 3, 5.5, and 8 bar, respectively. Injection durations were set at 5 ms throughout the experiment. The simulating events of the low engine speed were arranged at 1,000 rpm. The spray images were recorded by using a high-speed camera with a frame rate of 10,000 f/s at $512{\times}256pixels$. The spray characteristics were analyzed by using the image processing (Matlab). The results showed the significant difference that higher injection pressure had more effect on the spray shape than the lower injection pressure. When the injection pressure was increased, the longer spray penetration occurred. Moreover, the linear relation between speed and time are dependent on the injection pressure as well.

• 한국환경과학회지
• /
• 제12권3호
• /
• pp.265-274
• /
• 2003

The Pasquill-Gifford stability category is a very important scheme of the Gaussian type dispersion model defined the complex turbulence state of the atmosphere by A grade(very unstable) to F grade(very stable). But there has been made a point out that this stability category might decrease the predictability of the model because it was each covers a broad range of stability conditions, and that they were very site specific. The APSM (Air Pollution Simulation Model) was composed of the turbulent parameters, i.e. friction velocity(${\mu}$$\_$*/), convective velocity scale($\omega$$\_$*/) and Monin-Obukhov length scale(Ｌ) for the purpose of the performance increasing on the case of the unstable atmospheric conditions. And the PDF (Probability Density Function)model was used to express the vertical dispersion characteristics and the profile method was used to calculate the turbulent characteristics. And the performance assessment was validated between APSM and EPA regulatory models(TEM, ISCST), tracer experiment results. There were very good performance results simulated by APSM than that of TEM, ISCST in the short distance (<1415 m) from the source, but increase the simulation error(%) to stand off the source in others. And there were differences in comparison with the lateral dispersion coefficient($\sigma$$\_$y/) which was represent the horizontal dispersion characteristics of a air pollutant in the atmosphere. So the different calculation method of $\sigma$$\_$y/ which was extrapolated from a different tracer experiment data might decrease the simulation performance capability. In conclusion, the air pollution simulation model showed a good capability of predict the air pollution which was composed of the turbulent parameters compared with the results of TEM and ISCST for the unstable atmospheric conditions.

• 한국해안해양공학회지
• /
• 제19권6호
• /
• pp.574-585
• /
• 2007

해운대 해수욕장의 입사파랑 특성 분석을 위해 심해파랑 추산자료 분석 및 총 5회에 걸친 현지 파랑관측을 실시하였다. 관측 결과 탁월 파향은 춘계 및 하계에는 $SSW{\sim}S$ 계열인데 비해 추계 및 동계에는 $E{\sim}SE$ 계열이었다. 수치모델링 결과, E 계열의 입사파는 외해 쪽에 발달된 천퇴의 영향으로 인해 해안으로 진행하면서 크게 굴절되며, 해빈류는 봄 및 여름에는 동쪽 해안에서 외해로 나가는 흐름이, 가을 및 겨울에는 동쪽에서 해안을 따라 해수욕장 쪽으로 유입하는 흐름이 탁월하였다. 또한, 해운대 해수욕장의 표사경로를 파악하기 위해 수행된 155일간의 방사성동위원소 추적자실험 결과, 투입초기에는 연안방향으로 분산되었으나 2차 scan 이후부터 on-shore 방향으로 이동하는 경향을 보였으며, 해안 부근에서는 연안방향으로 분산되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.2019-2023
• /
• 2005

A aspheric lens is one a key point optical element in the optical industry. The feature of a aspheric lens is not to have the spherical aberration. A aspheric lens is also essential element for high-precision and light-weight in the optical machine. Generally it have been used in a tailor progression an aspheric lens modelling much. In this study we applied a lay back-tracer using a index of refraction to draw a creative aspheric lens. And we executed a comparison experiment for refraction situation of shape and straightness experiment to inspect the drawn aspheric lens in this study

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.197-202
• /
• 2005

An aspheric lens is one of a key point optical element in the optical industry. The feature of an aspheric lens is not to have the spherical aberration. An aspheric lens is also essential element for high-precision and light-weight in the optical machine. Generally it have been used in a tailor progression an aspheric lens modelling much. In this study we applied a lay back-tracer using a index of refraction to draw a creative aspheric lens. Also we developed the automatic design program for aspheric lens. We manufactured the aspheric lens and executed a comparison experiment for refraction situation of shape and straightness experiment to inspect the drawn aspheric lens in this study.

• 한국수자원학회논문집
• /
• 제43권2호
• /
• pp.153-165
• /
• 2010

Large-Scale Particle Image Velocimetry (LSPIV)는 Particle Image Velocimetry (PIV)를 실험실내의 비교적 규모가 큰 흐름이나 하천에서의 표면유속장의 측정 등 넓은 영역에 적용할 수 있도록 확장시킨 것이다. LSPIV는 PIV의 구성요소를 포함하여 추적자 투하, 조명, 촬영, 이미지 변환, 이미지 처리 및 후처리의 여섯 단계로 구성된다. 본 연구에서는 LSPIV의 모바일 버전인 MLSPIV를 이용하여 하천에서의 유속측정시 각 단계별로 발생가능한 오차성분을 정의하였고, 기존의 연구 결과를 바탕으로 오차의 영향이 정량적으로 밝혀진 것을 정리하였다. 각 단계별로 오차 발생요인을 조사한 결과 27개의 성분오차성분을 파악하였다. 이중에서 5개의 오차요소는 기존에 연구가 진행되었고, 7개의 오차요소는 본 논문에서 적용시의 MLSPIV에는 그 효과가 미치지 않는 것으로 파악하였다. 나머지 15개의 오차성분 중 4가지 오차성분- 샘플링시간, 이미지 해상도, 추적자의 성질, 바람-에 대해서 유속산정시 미치는 영향을 파악하기 위하여 개수로 실험장치를 이용한 실내시험을 실시하였다. 이미지 프로세싱에 이용한 이미지수로부터 나타나는 유속계산 오차를 조사한 결과 이미지의 개수가 50매 이상인 경우는 이로 인한 오차가 1 % 이하로 감소함을 파악하였다. 촬영된 이미지의 해상도가 유속계산시 미치는 영향을 조사하기 위해 세 가지 이미지 해상도로 변화시키면서 유속측정 오차를 분석한 결과 저해상도의 이미지를 이용한 경우 고해상도 이미지를 이용한 경우와 비교하여 3 % 가량의 차이를 나타내었다. 추적자의 성질과 바람의 영향에 대해서는 흐름의 평균유속이 큰 경우에는 바람이 추적자에 마치는 영향이 현격히 줄어듬을 보이고 있다. 즉, 유속이 증가함에 따라 바람의 영향은 감소하나, 바람의 영향을 최소화시키기 위해서는 가급적 비중이 큰 물질(0.5

• Nuclear Engineering and Technology
• /
• 제39권4호
• /
• pp.327-336
• /
• 2007

The influence of density differences on the mixing of the primary loop inventory and the Emergency Core Cooling (ECC) water in the downcomer of a Pressurised Water Reactor (PWR) was analyzed at the ROssendorf COolant Mixing (ROCOM) test facility. ROCOM is a 1:5 scaled model of a German PWR, and has been designed for coolant mixing studies. It is equipped with advanced instrumentation, which delivers high-resolution information for temperature or boron concentration fields. This paper presents a ROCOM experiment in which water with higher density was injected into a cold leg of the reactor model. Wire-mesh sensors measuring the tracer concentration were installed in the cold leg and upper and lower part of the downcomer. The experiment was run with 5% of the design flow rate in one loop and 10% density difference between the ECC and loop water especially for the validation of the Computational Fluid Dynamics (CFD) software ANSYS CFX. A mesh with two million control volumes was used for the calculations. The effects of turbulence on the mean flow were modelled with a Reynolds stress turbulence model. The results of the experiment and of the numerical calculations show that mixing is dominated by buoyancy effects: At higher mass flow rates (close to nominal conditions) the injected slug propagates in the circumferential direction around the core barrel. Buoyancy effects reduce this circumferential propagation. Therefore, density effects play an important role during natural convection with ECC injection in PWRs. ANSYS CFX was able to predict the observed flow patterns and mixing phenomena quite well.

• 생태와환경
• /
• 제52권3호
• /
• pp.192-201
• /
• 2019

효과적인 물환경관리계획을 수립하기 위해서는 다양한 기원의 유기물이 난분해성 유기물 농도 증가에 영향을 줄 수 있는지 여부를 파악하는 것이 중요하다. 특히 상당량의 광합성 산물은 식물플랑크톤에 의해 매일 생성되고 있지만, 이들이 수계 내 난분해성 유기물에 기여하는지에 대한 정보는 부족하다. 본 연구에서는 $^{13}C$ 및 $^{15}N$ 추적자 첨가실험을 통해 조류기원 유기물이 생분해(60일, 암배양) 및 산화제(과망간산칼륨) 처리 후 분해되지 않고 잔존하는지 여부를 확인하였다. 생분해 실험 결과 광합성을 통해 생성된 총 유기탄소($TO^{13}C$), 입자성 유기탄소($PO^{13}C$), 입자성 질소($P^{15}N$)는 각각 26%, 20%, 17%가 비 생분해성 유기물로 잔존하였다. 또한 상당량의 $PO^{13}C$가 과망간산칼륨에 의해 산화되지 않고 잔존하였다(초기: 12%, 60일 암배양 후: 38%). 이는 미생물에 의해 사용된 후 남아있는 조류기원 유기물이 난분해성 유기물에 기여할 수 있음을 의미한다. 또한 미생물에 의해 변형된 조류기원 유기물의 양은 COD 산화율 및 유기물 지표 간 격차에 영향을 줄 것으로 사료된다.