• The Journal of the Korea Contents Association
• /
• v.7 no.1
• /
• pp.139-146
• /
• 2007

Most of embedded systems have been developed practically based on the PC platform equipped with Intel x86 CPU since it is able to reduce the total time for product development and improve the reliability of product by making use of a variety of solutions developed for a long time in the PC environment. Also, embedded systems based on PC-platform mainly use a high-capacity hard disk as data storage device for applications intending to store multimedia data. Recently, while the capacity of hard disk is increasing rapidly, the start-up ready time of hard disk is growing longer more than 30 seconds. The lengthened start-up ready time may delay the booting time of embedded system seriously, weighting users down with inconvenience. This paper proposes the refined system architecture and the dynamic IDE device probing method for fast booting of linux kernel in the embedded system based on PC platform with high-capacity hard disks, and the performance of proposed methods is evaluated and presented.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.5
• /
• pp.545-557
• /
• 2011

The objective of this study was to estimate the trends of each pollutant using the air pollution monitoring networks data from January 2005 to December 2008 in Daegu area. Also, the spatial characteristics of each pollutant were determined using the Pearson correlation coefficients and COD (coefficients of divergence). In this study, the trends of hourly, monthly, seasonal, and total average concentrations of each pollutant for the 10 sites were analyzed. The Ihyeon site showed highest concentration for the $SO_2$, $NO_2$, and PM10}. In the case of $O_3$, the Jisan site showed highest concentration among the other sites. Also, industrial area presented highest concentration for the $SO_2$, CO, and PM10. On the other hand, $NO_2$ showed highest in commercial area. The IDW (inverse distance weighting) method was used to estimate characteristics of spatial distribution. The results provide identify spatial distribution for each pollutant. Also, the Pearson correlation coefficients and COD values provide spatial variability among the monitoring sites. The COD of each pollutant showed very low values for all of the sites pairs. On the other hand, the Pearson correlation coefficients showed high values for all of the sites pairs. Finally, analysis of spatial variability can be used to characterize the spatial uniformity and similarity of concentrations from each pollutant.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.4
• /
• pp.287-292
• /
• 2005

Objective: Recent clinical studies have demonstrated that intracisternal administration of recombinant tissue plasminogen activator(rt-PA) can facilitate the normal clearing of blood from the subarachnoid space. Urokinase, a first generation fibrinolytic agent, has been used to liquify such clots with some success. Therefore, recombinant tissue plasminogen activator, a second generation fibrinolytic drug that may be safer and more effective, is studied to evaluate its dosage to lyse clots in vitro and reactivity in the brain parenchyme. Methods: Intracerebral hematomas were created by stereotactically injecting 2ml of clotted autogenous blood into the brain parenchyme of total 28 anesthetized adult cats (weighting 3.8 to 4.1 kg). The control animals (group A) received 1 ml of normal saline injected into the clots and the experimental animals received each 0.1 mg of rt-PA (group B), 0.5mg of rt-PA (group C) and 1 mg of rt-PA (group D) at 6 hours after the clot injection. Results: 1. The amount of remained clots after lysing the hematomas were as follows: $1.80{\pm}0.17ml$ in group A, $1.65{\pm}0.23ml$ in group B, $0.61{\pm}0.37ml$ in group C and $0.52{\pm}0.34$ in group D. The result indicated that hematomas in rt-PA treated groups (C & D) were lysed better than the control group. 2. At least 0.5mg of rt-PA should be required for the lysis of 2ml of hematomas. 3. Light microscopic examination revealed no histological evidence of hemorrhage in tissue sections from each brain. Conclusion: Recombinant tissue plasminogen activator may be safely and effectively employed for the lysis of intracerebral hematomas in animal model.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.3
• /
• pp.214-221
• /
• 1998

A new control approach using neural network for the robust position control of a BRUSHLESS direct drive(BLDD) motor is presented. The linear quadratic controller plus feedforward neural network is employed to obtain the robust BLDD motor system approximately linearized using field-orientation method for an AC servo. The neural network is trained in on-line phases and this neural network is composed by a feedforward recall and error back-propagation training. Since the total number of nodes are only eight, this system will be easily realized by the general microprocessor. During the normal operation, the input-output response is sampled and the weighting value is trained by error back-propagation at each sample period to accommodate the possible variations in the parameters or load torque. And the state space analysis is performed to obtain the state feedback gains systematically. In addition, the robustness is also obtained without affecting overall system response.

• Archives of Plastic Surgery
• /
• v.38 no.1
• /
• pp.1-6
• /
• 2011

Purpose: Currently, soft tissue filler products based on hyaluronic acid are widely used. They are safe, effective, and convenient to use compared with bovine collagens. However, all commercially available hyaluronic acid based fillers in Korea are imported ones. The purpose of this study is to evaluate efficacy of a new hyaluronic acid filler (HyaFilia; CHA bio&Diostech Co., Seoul), which has been recently developed in Korea. Methods: Three kinds of soft tissue fillers, including Restylane (Q-Med, Uppsala, Sweden), HyaFilia (CHA bio & Diostech Co., Seoul), Juvederm (Allergan, CA, USA), were injected subdermally into the back of hairless mice at six sites. The 2 cephalic sites composed Restylane groups, the 2 middle sites HyaFilia groups, and the 2 caudal sites Juvederm groups. Six hairless mice were included in the study, therefore, a total of 12 injections per group were performed. After 16 weeks after injection, the nodular swellings that resulted from the injections were excised wide enough to include skin beyond the swelling points down to the panniculus carnosus layer using 8mm punches. Volumes and weights were measured using a stereoimage optical topometer system and a weighting machine. Histologic comparisons were also carried out. Results: The mean volumes of the Restylane, HyaFilia and Juvederm groups were $3698{\times}103$, $4820{\times}103$, and $1435{\times}103$ PI, respectively. The mean weights of the Restylane, HyaFilia and Juvederm groups were 36.08, 37.83, and 24.66 mg, respectively. Histologic examination between the 3 groups showed no significant difference in tissue compositions and inflammatory reactions. Conclusion: The results of this study shows that HyaFilia is superior to Restylane and Juvederm in longavity of filling effect. Therefore, HyaFilia may be an effective replacement for the imported materials including Restylane and Juvederm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7A
• /
• pp.569-580
• /
• 2012

In this paper, an enhanced initial ranging algorithm for large-cell coverage fixed wireless communication system is proposed. In typical wireless communication system such as WiBro, because a round-trip delay between a transmitter and a receiver is within one OFDM (Orthogonal Frequency Division Multiplexing) symbol duration, a frequency-domain differential correlation method is generally used. However, the conventional method cannot be applied due to an increase of a maximum time delay in large-cell system. In case of an accumulative differential method, estimation errors can occur because of frequent sign transitions. In this paper, therefore, we propose an algorithm which can estimate a total timing offset in a ranging channel structure for 15 km cell. The proposed method can improve performance by sign comparison based sign error correction rule between the estimated values and using a weighting scheme based on channel correlation, the number of accumulations, and the noise reduction effect in normalization process. Also, it can estimate the integer timing offset of symbol duration by comparing peak-powers after compensating for the fractional timing offset of symbol duration.

• Journal of Korea Water Resources Association
• /
• v.43 no.11
• /
• pp.945-956
• /
• 2010

Practically, the composite roughness coefficient, which is the equivalent roughness coefficient of a cross-section where the wall roughness is not constant along the wetted perimeter, is used to describe the flow conditions in open channels. In this study, it was conducted that the previous formulae was classified according to a weighting factor of the local resistance. The new subsection division method was also developed based on the force-balance concept in each subsection. The accuracy of the proposed method was examined and the applicability and limitation of the 13 existing formulae were analyzed by comparing the calculated with the experimental measured data from Djajadi (2009) and Knight and Macdonald (1979). It was found that Horton's method might underestimate the total conveyance of a composite channel and Lotter's method showed a good agreement between calculated and measured data. However, the proper division method, such as the proposed method based on the Z-method, is required for the application of Lotter's method.

• Korean Journal of Community Nutrition
• /
• v.4 no.4
• /
• pp.529-538
• /
• 1999

It is very important to collect information on the nutritional status of the Korean population for the development of health promotion programs including nutrition. The purpose of this study was to assess the nutritional status of various population living in selected areas for model nutritional work. Seven hundred eighty households(30 households per each area)from 26 areas participated in this study from November 1 to November 20, 1996. Dietary intake data for two consecutive days were collected at household level by a weighting method. The mean energy intake of the subjects(1,934kcal) was higher than that resulted from the ‘95 Korean National Nutrition Survey(1,839kcal). The proportion of energy derived from cereals was 60.1%. The proportion of total protein intake from animal sources was 49.4%. These results were similar to those found in the ‘95 Korean National Nutrition Survey. Most nutrients(except iron, thiamin, riboflavin, vitamin C, and crude fiber) were higher than the result of the ‘95 Korean National Nutrition Survey. However, the average iron intake was about 68% of the result of ‘95 Korean National Nutrition Survey. This may be due to the adjustment of iron content in rice(3.7mg/100glongrightarrow0.5mg/100g) included in nutrient database for calculating nutrient intakes. The mean energy contribution from carbohydrate, protein, and fat were 64.2%, 16.4% and 19.4%, respectively. Significant differences of nutrient intakes were noted among some areas, which may be due to different food intake patterns according to the needs of the particular area. Therefore, the result of this study indicates that there are significant differences in food and nutrient intakes among the areas, suggesting that nutritional improvement programs may need to be developed differently by areas.

• Journal of Community Nutrition
• /
• v.1 no.2
• /
• pp.119-124
• /
• 1999

The purpose of this study is to investigate the daily variation of Na intake as measured by dietary methods(weighing vs food analysis) and to examine the difference between urniary Na excretion and dietary Na intake in 9 healthy free living women aged 25-64 years living in Taegu, Korea. Information on the dietary Na intake for 5 consecutive days was collected using he weighing method. Twenty four-hour urine samples were collected for the same period to measure the urinary Na excretion. In order to figure out the difference of Na intake with respect to dietary assessment methodology, dietary intake was measured by the weighing method for three of a total 5 days. At the same time, the meals that subjects consumed each day were collected to analyze daily intake of each subject by the food analysis method. The mean Na intake of subjects for 5 consecutive days by the weighing method was 3558. 5mg. The mean of urinary Na excretion for the same period was 2847.5mg/ Na intake and Urinary Na excretion of each subject ranged from 4475.3 to 2838.4, from 4066.4rmg to 1936.1mg respectively. The mean of Na intake for 3 days by the analysis method and the weighing method were 3044.6mg and 3441.6mg, respectively. Each subject showed a great difference among day-to-day variation of Na intake by the weighting method, analysis method and urinary Na excretion method. Therefore, a short term study period may not be valid to estimate the true average Na intake.

• Journal of Environmental Science International
• /
• v.20 no.11
• /
• pp.1395-1401
• /
• 2011

In this study, Life Cycle Assessment(LCA) has been carried out to evaluate the environmental impacts of a metallic can. A 360 mL volume of an aluminum can bottle was used as the functional unit. The results of Life Cycle Inventory(LCI) showed that iron ore and coal were the major parts of the input materials, whereas aluminum can products, carbon dioxide, wastewater, and hazardous wastes were those of the output ones. According to LCA weighting, it was observed that the most significant impact potential was found to be global warming(49.11%) followed by abiotic resource depletion(47.72%). In the whole system, cold rolled steel coil showed the largest environmental impact potential(86%), followed by electricity(14%). Meanwhile, lubricating oil and industrial water had the minor portion of the total environmental impact potentials. It was suggested that the use of cold rolled steel and electricity should be the main source for $CO_2$, resulting in the big impact on global warming.