• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.3
• /
• pp.91-100
• /
• 2006

In this study, the characterization of unit load generation and discharge from various type stall of piggery was conducted by investigation and analysis of contaminants loading from piggery urine, manure and wastewater. The results are summarized as follows: The unit load generation of filth increases as piggery grow older, but there was not large enough difference among those values of unit load evaluated for various stall types if mean values of each type of stall are considered. The generation amounts of manure and urine were total 4.57kg/head/d of 1.49kg manure/head/d and 3.08kg urine/head/d with consideration of 3 seasons and live weight. The finalized mean unit load generation of filth were estimated at BOD 199.5g/head/d, $COD_{cr}\;413.5g/head/d$, T-N 27.8g/head/d, T-P 5.3g/head/d with consideration of seasons and the type of stalls. The wastewater unit loads discharged from cement type stall were estimated at BOD 31.3g/head/d, $COD_{cr}\;95.6g/head/d$, T-N 8.9g/head/d, T-P가 3.1g/head/d. The sum of manure unit load generation considered with manure collection ratio(80%, 90%) and wastewater unit load was almost similar when compared to the unit load discharged from slurry type stall even though more or less difference were appeared according to each contaminants and parameters.

• Tribology and Lubricants
• /
• v.13 no.1
• /
• pp.82-87
• /
• 1997

The modern orthopaedics frequently uses the total hip replacement in the artificial hip joint. The wear in this joint requires a re-replacement of hip joints because it is under the severe load and friction conditions. To solve these problems the previous studies have been mainly focussed on the development of new materials. The research of new materials, however, needs much time and effort since it should be experimented for its bio-compatibility, friction, and wear characteristics. To reduce the work, in this study, the finite element analysis is applied to find new combinations of bio-materials in the total hip replacement which has the excellent contact characteristics. A non-linear FEM program MARC with 5-node axisymmetric element was used for analyzing the contact stresses between the hip joints. The computed results show that in case of acetabulum UHMWP has good characteristics, in femoral head, $Al_2O_3$, and in stem, Ti6Al4V.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.10a
• /
• pp.189-194
• /
• 1996

The modern orthopaedics frequently uses the total hip replacement in the artificial hip joint. The wear in this joint requires the re-replacement of the hip joint beacuse it is under the severe load and friction conditions. To solve these problems the previous studies have been mainly focused on the development of the new materials. The research of new material, however, needs much time and effort since it should be experimented for its bio-compatibility, friction, and wear characteristics. To reduce the work, in this study, the finite element analysis is applied to find the new combination of the materials in the total hip replacement which has the excellent contact characteristics. The finite element uses MARC and the 5-node aximetric element. The results show that in case of acetabulum UHMWP has good characteristics, in femoral head, the $Al_2O_3$, and in stem, Ti6Al4V.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.589-592
• /
• 2002

A commercial CFD code is applied to analyze the 3-D viscous flow field within vertical multi-stage centrifugal pump including impeller of centrifugal pump with 6 blades and guide vain with 11 blades. The numerical analysis of vertical multi-stage centrifugal pump is performed by changing flow rate from $8\;to\;26\;m^{3}/h$ at the constant 3500rpm. The characteristics such as total pressure coefficient, total head, water horse power, power efficiency are represented according to flow rate changing. In the future, we will need to perform flow calculation of vertical multi-stage centrifugal pump by considering meridional shape of impeller.

• Development and Reproduction
• /
• v.21 no.1
• /
• pp.63-69
• /
• 2017

On the 15 days after hatching, the larvae was 4.24-5.10 mm (mean $4.66{\pm}2.18mm$) in total length, and the fins of the membrane started to develop into a fan shape and the melanophore was deposited upper the alimentary canal of the abdomen and on the bladder. At 35 days after hatching, the post-larvae formed a branch-shaped melanophore on the head part with a total length of 6.98-12.5 (mean $9.35{\pm}1.71$) mm, formed on the upper and lower parts of the caudal part, formed on the upper and lower parts of the caudal part, and deposited under the head part and abdomen. At 40 days after hatching, the juvenile was 11.3-18.1 (mean $14.9{\pm}1.53$) mm in total length.

• Journal of Korean Neurosurgical Society
• /
• v.61 no.5
• /
• pp.568-573
• /
• 2018

Objective : Thoracic pedicles have special and specific properties. In particular, upper thoracic pedicles are positioned in craniocaudal plane. Therefore, manipulation of thoracic pedicle screws on the left side is difficult for right-handed surgeons. We recommend a new position to insert thoracic pedicle screw that will be much comfortable for spine surgeons. Methods : We retrospectively reviewed 33 patients who underwent upper thoracic pedicle screw instrumentation. In 15 patients, a total of 110 thoracic pedicle screws were inserted to the upper thoracic spine (T1-6) with classical position (anesthesiologist and monitor were placed near to patient's head. Surgeons were standing classically near to patient's body while patients were lying in prone position). In 18 patients, a total of 88 thoracic pedicle screws were inserted to the upper thoracic spine with the new standing position-surgeons stand by the head of the patient and the anesthesia monitor laterally and under patient's belt level. All the operations performed by the same senior spine surgeons with the help of C-arm. Postoperative computed tomography scans were obtained to assess the screw placement. The screw malposition and pedicle wall violations were divided and evaluated separately. Cortical penetration were measured and graded at either : 1-2 mm penetration, 2-4 mm penetration and >4 mm penetration. Results : Total 198 screws were inserted with two different standing positions. Of 198 screws 110 were in the classical positioning group and 88 were in the new positioning group. Incorrect screw placement was found in 33 screws (16.6%). The difference between total screw malposition by both standing positions were found to be statistically significant (p=0.011). The difference between total pedicle wall violations by both standing positions were found to be statistically significant (p=0.003). Conclusion : Right-handedness is a problem during the upper thoracic pedicle screw placement on the left side. Changing the surgeon's position standing near to patient's head could provide a much comfortable position to orient the craniocaudal plane of the thoracic pedicles.

• Korean Journal of Head & Neck Oncology
• /
• v.25 no.2
• /
• pp.119-122
• /
• 2009

Objectives : Ablation of carcinoma of the tongue leads to deficits in speech and swallowing, but none to date has provided all of the qualities of mobility and sensation to simulate the complex function of the tongue. The authors evaluated postoperative swallowing and pronouncing function in patients who underwent tongue reconstruction using free flap. Material and Methods : This is a retrospective review documenting the outcome of 42 patients between January of 1991 and August of 2008. We classified patients according to the size of resection of the tongue like as 7 partial glossectomy, 25 hemiglossectomy, 2 subtotal glossectomy, and 8 total glossectomy. Swallowing function was graded into 4 point scale and pronouncing function was analyzed using picture consonant articulation test. Aspiration was evaluated with videofluoroscopic swallowing study. Results : The average points for swallowing function were 3.43 in partial glossectomy, 3.52 in hemiglossectomy, 3 in subtotal glossectomy, and 2.63 in total glossectomy. The percentage of consonants correct showed 76.5% in partial glossectomy, 72.29% in hemiglossectomy, 47.69% in subtotal glossectomy, and 29.94% in total glossectomy. Aspiration was noted in 3 patients(1 hemiglossectomy and 2 total glossectomy) and 2 total glossectomy patients were taken permanent feeding gastrostomy. Conclusion : Free flap gave us proper volume in tongue reconstruction and showed good result in preserving swallowing function. Swallowing function difference according to the size of defect showed no statistical significance, whereas articulation function was shown to decrease in accuracy as the size of defect was larger.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.10
• /
• pp.1529-1534
• /
• 2003

The effects of dietary vitamin E supplementation (control; 200 IU/head/day, 500 IU/head/day and 1,000 IU/head/day) on color stability, lipid oxidation and total reducing ability in M. longissimus and M. semimembranosus from Hanwoo (Korean cattle) steer during retail display ($3{\pm}1^{\circ}C$, 1,200 lux) were investigated. The $L^{*}$, $a^{*}$, $b^{*}$, $C^{*}$, R630-R580 values and TRA (total reducing ability) of 1,000 IU group were significantly (p<0.05) higher than those of the other groups. The $a^{*}$, $C^{*}$, R630-R580 and TBARS values were significantly (p<0.05) higher in M. longissimus than in M. semimembranosus. The $a^{*}$, $C^{*}$, R630-R580 values and TRA for two beef muscles declined gradually during storage and the decline was more rapid in control and 500 IU groups. Hue angle and metmyoglobin (%) for two beef muscles increased (p<0.05) as display time increased, and 1,000 IU group had a lower rate of metmyoglobin accumulation during retail display. The TBARS values for two beef muscle were significantly (p<0.05) lower in 1,000 IU group than in the other groups over time. Consequently, the meat from 1,000 IU vitamin E-supplemented Hanwoo steer extended retail display life compared to the control and 500 IU/head/day.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.3
• /
• pp.372-377
• /
• 2016

The objectives of the trial were to investigate the effects of supplementing vitamin E (VE) on nutrient digestion, nitrogen (N) retention and plasma parameters of beef cattle in feedlot. Four growing Simmental bulls, fed with a total mixed ration composed of corn silage and concentrate mixture as basal ration, were used as the experimental animals. Four levels of VE product, i.e. 0, 150, 300, 600 mg/head/d (equivalent to 0, 75, 150, 300 IU VE/head/d), were supplemented to the basal ration (VE content 38 IU/kg dry matter) in a $4{\times}4$ Latin square design as experimental treatments I, II, III and IV, respectively. Each experimental period lasted 15 days, of which the first 12 days were for pretreatment and the last 3 days for sampling. The results showed that supplementing VE did not affect the nutrient digestibility (p>0.05) whereas decreased the urinary N excretion (p<0.01), increased the N retention (p<0.05) and tended to increase the microbial N supply estimated based on the total urinary purine derivatives (p = 0.057). Supplementing VE increased the plasma concentrations of VE, glucose and triglycerol (TG) (p<0.05) and tended to increase the plasma concentration of total protein (p = 0.096) whereas did not affect the plasma antioxidant indices and other parameters (p>0.05). It was concluded that supplementing VE up to 300 IU/head/d did not affect the nutrient digestibility whereas supplementing VE at 150 or 300 IU/head/d increased the N retention and the plasma concentrations of VE and TG (p<0.05) of beef cattle.

• The Research Journal of the Costume Culture
• /
• v.25 no.5
• /
• pp.670-681
• /
• 2017

Firefighting hoods protect the head, face, and neck areas of officials while they perform firefighting services. The purpose of this study is to investigate the head size of Korean firefighting officials in order to establish the dimensions necessary to construct firefighting hoods. A total of 98 male firefighting officials participated in this study and 11 body dimensions, necessary for the construction of firefighting hoods, were measured. The data collected from the firefighting officials were compared to the general adult male data from the Size Korea national anthropometric study. The heights, weights, head circumferences, head heights, and bitragion arcs of the firefighters were significantly larger than those of general adult males, which shows that firefighting officials generally have larger body and head sizes than general adult males. Based on the results of Pearson's correlation coefficients, head circumference and head height were judged to be the important measurements for the construction of the firefighting hoods. Thus, these two measurements were chosen as the basic dimensions of the cross tabulation analysis. As a result, head circumferences of 57.00~60.99cm and head heights of 23.00~25.99 cm were found to be important measurement ranges among the firefighters. This study is expected to be used as the basis for the creation of firefighting hoods that help to ensure the safe rescue activities for firefighting officials.