• 한국물환경학회지
• /
• 제39권5호
• /
• pp.377-389
• /
• 2023

Chungcheongnam-do has been measuring the flow rate and water quality of streams in the province once a month since 2011 in order to water environment policies. Based on the results, after evaluating the coefficient of variation and the tendency of the water quality trend by using the Mann-Kendall test and Sen's Slope for each stream, the streams subject to priority introduction of Total Pollution Load Management at Tributaries were selected through the Stream Grouping Method. The water quality trend analysis results for 125 streams using the Mann-Kendall test and Sen's Slope were evaluated as streams showing a tendency of deteriorating water quality Biochemical oxygen demand (BOD): 13 streams, Total Phosphorus (T-P): 16 streams). Streams with deteriorating water quality were classified into A-D groups using the Stream Grouping Method. Group A, which has a high flow rate and high water quality, is a stream that requires priority management, and was selected as a stream for introduction of Total Pollution Load Management at Tributaries. There are 7 streams that need to be introduced into the BOD category, and there are 7 streams that need to be introduced into the T-P category. In this study, based on flow and water quality monitoring data accumulated over a long period of time (2011-2022), statistical techniques are used to select watersheds in which water quality is deteriorating. Accordingly, it is expected that it will be useful in establishing a water quality improvement plan in the future.

• International Journal of Quality Innovation
• /
• 제5권2호
• /
• pp.122-131
• /
• 2004

Because of three reasons: rare natural resources, high dependent ratio and rapid wage increases, Korea must take the non-price competitive strategy. The developing process of quality management system in Korea can be categorized into five stages according to changes in economic policy. In order to develop the Korean quality management system effectively, we should try to connect total quality management with management system and emphasize the training and education.

• International Journal of Quality Innovation
• /
• 제2권1호
• /
• pp.1-9
• /
• 2001

As all the other managerial activities, total quality management (TQM) has also inputs into and outputs from the process. Therefore, the principal managerial efficiency criteria of maximum outputs with minimum inputs should be applied to TQM. In this paper, the methodology for the performance evaluation of TQM by Data Envelopment Analysis (DEA) was proposed. DEA is used to measure the efficiency of TQM for each firm with the input and output data obtained by questionnaire. It is found that there are not significant differences between the firms with and without IS09000 certification and between the large and small-sized firms with respect to the TQM efficiency.

• 품질경영학회지
• /
• 제26권3호
• /
• pp.100-107
• /
• 1998

To evaluate the total quality activities is the most fundamental and critical process as one of the PDCA cycle. The quality award criteria such as Malcolm Baldrige National Quality Award and Deming Award can be a, pp.ied to the guideline for evaluating quality activities. We can identify several important factors for TQM by referring quality award criteria, but they don't suggest how efficiently implement TQM. In this paper, two methodologies are a, pp.ied to evaluate the TQM activities comparatively. One of them is the traditional scoring system (TSS) by analytic hierarchy process (AHP). TSS is the system which evaluates the performance of TQM by the weighted sum of critical success factors. Several quality award system are typical examples of TSS. The other is the efficiency measuring system (EMS) by data envelop analysis (DEA). DEA outperformed other alternative methods to measure the efficiency and it can be a, pp.ied to evaluate the TQM activities. The evaluation system by DEA can be named as EMS. The objective of this paper is to suggest a model called TAE (Total quality management Activities Evaluation), for evaluating TQM activities. In this model TQM organizations are classified into four types by considering TSS and EMS. Those types are high weighted sum and high efficiency type, high weighted sum and low efficiency type, low weighted sum and high efficiency type, and low weighted sum and low efficiency type. Therefore TQM organizations must not only make efforts to get the higher scores in terms of TSS, but also take necessary steps to enhance their efficiencies.

• 한국물환경학회지
• /
• 제22권5호
• /
• pp.807-814
• /
• 2006

Sapkyo Lake Watershed occupies about 19.3% of total area of Chungnam Province, and it is necessary to make a plan of counter-measure for the maintenance of public waterbody sound as well as to ensure water resources due to urbanization and industrialization in this area so densely populated and excessively developed. Conventionally water quality management has been enforced by concentration-based system which is not considered the carrying capacity of receptors, hence there are no proper measures for the prevention of an excessive pollutant load over a waterbody. So even though emission sources abide by the conventional permission regulation, then the quantity of wastewater is increased continuously and encountered water shortage to use finally. Therefore this research focused on the review of introduction of total water quality management system in Sapkyo Lake watershed to maintain public waterbody sound and to ensure water resources. By doing this research in introduction of the system in advance, it can contribute to establish the methodology on systematic water quality management. Also the application of this system in Sapkyo Lake watershed can promote the sustainable development of the area by harmonizing the environment and regional economy ultimately.

• 유통과학연구
• /
• 제13권8호
• /
• pp.27-40
• /
• 2015

Purpose - Total Quality Management (TQM) has received significant attention and interest from a large number of organizations around the world in various industries. These organizations have tried to embody TQM concepts in areas such as engineering and product design, marketing, R&D, procurement, production, personnel, and product inspection. Research design, data, and methodology - This study presents an overview of the fundamentals of TQM and an in depth review of the obstacles to the successful implementation of TQM. Results - In order to control the cost of manufacturing, the tracking of the cost of quality (COQ) allows companies to capture the actual overall cost incurred in producing a unit of product or service. The study explores the reasons why companies track the COQ and ways to address it. Conclusions - Based on the results, COQ is one of the key performance indicators for making more accurate strategic decisions as well as a critical aspect of TQM. The study also presents a few popular quality improvement tools that have been widely used in organizations successfully implementing TQM.

• 한국물환경학회지
• /
• 제28권5호
• /
• pp.693-703
• /
• 2012

Load Duration Curve(LDC) is a useful tool for analyzing water quality characteristics under various stream flow conditions. This study investigated the methods to identify impaired waterbodies in the assessment of water quality goal attainment by using LDC for the management of Total Maximum Daily Loads (TMDLs). Three methods were proposed. Non-typical regime exclusion method is a method to exclude water quality observations in the non-typical extreme flow conditions in order to minimize the influence of non-ordinary water quality. Flow regime weighted average method is a method to calculate weighted mean water quality instead of arithmetic mean in order to consider water characteristics properly on stream flow regime in addition to the effect of Non-typical regime exclusion method. Load exceeded interval comparison method is a method to compare the intervals between the attained and non-attained load duration periods on the LDC. The assessment of water quality goal attainment can be performed more reasonably and precisely considering water quality variations on stream flow conditions by applying these proposed methods.

• 품질경영학회지
• /
• 제52권1호
• /
• pp.77-93
• /
• 2024

Purpose: The purpose of this study is to examine machine learning use cases in manufacturing companies from a digital quality management (DQM) perspective and to analyze and present machine learning research patterns from a quality management perspective. Methods: This study was conducted based on systematic literature review methodology. A comprehensive and systematic review was conducted on manufacturing papers covering the overall quality management process from 2015 to 2022. A total of 3 research questions were established according to the goal of the study, and a total of 5 literature selection criteria were set, based on which approximately 110 research papers were selected. Based on the selected papers, machine learning research patterns according to quality management were analyzed. Results: The results of this study are as follows. Among quality management activities, it can be seen that research on the use of machine learning technology is being most actively conducted in relation to quality defect analysis. It suggests that research on the use of NN-based algorithms is taking place most actively compared to other machine learning methods across quality management activities. Lastly, this study suggests that the unique characteristics of each machine learning algorithm should be considered for efficient and effective quality management in the manufacturing industry. Conclusion: This study is significant in that it presents machine learning research trends from an industrial perspective from a digital quality management perspective and lays the foundation for presenting optimal machine learning algorithms in future quality management activities.

• 품질경영학회지
• /
• 제45권3호
• /
• pp.403-426
• /
• 2017

Purpose:?The purpose of this study is to analyze the causal relationship between top management 's leadership and construction quality management activities that affect construction management performance based on construction quality management. Methods:?As its method, the causal relationship between the leadership of top management and the key management factors of construction quality management activities affecting management performance is analyzed by using the structural equation model. The construction companies used in the analysis sample conducted surveys on companies that are conducting ISO, KOSHA, OHSAS, DQC, and so on. Results:?It was revealed that top management's leadership has a great influence on management performance and all management factors of construction quality management activities. However, safety management does not affect the management performance of construction quality management activities. And top management's leadership on management performance are explained by the mediating effect of cost, time, quality and communication among management factors of construction quality management activities. Conclusion:?In the previous study, the quality management activities and the ISO - based integrated total quality management system (TQM) applied in the manufacturing or service industries were presented as empirical results. However, this study presents the results of different studies by presenting empirical study results by selecting time, cost, quality, safety and communication as key management factors of quality management activities of construction companies through reviewing and analyzing previous studies in construction field.

• 환경영향평가
• /
• 제12권5호
• /
• pp.359-367
• /
• 2003

The total pollution load management system of watershed has been implemented upon Special Law pertaining to the Han River Watershed Water Quality Improvement and Residents Support, Special Law pertaining to the Nakdong River Watershed Water Management and Residents Support, Special Law pertaining to the Youngsan River Watershed Water Management and Residents Support, and Special Law pertaining to the Seomjin River Watershed Water Management and Residents Support in Korea since 2002. But many other similar systems with total pollution load management system of watershed are being operated separately or independently, even though its purpose is nearly same with those of the total maximum pollutants load management in Law on Water Quality Environmental Protection, environmental impact assessment(EIA) in Law of Impact Assessment on Environment, Transportation and Disaster and Pre-environmental assessment of Environmental Policy Act. Therefore the contents of total pollution load management system of watershed and many other related systems could be overlapped and at some times have inconsistency among them. This study suggests first the integrated operation of total pollution load management system of watershed, EIA, pre-environmental assessment, urban planning, and sewage planning and secondly EIA system development by integration of EIA and pre-environmental assessment and strategic environmental assessment(SEA).