• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.52-59
• /
• 2014

Operator training simulator, within a training environment designed to understand the principles and behavior of the railway system with respect to operator's entries and predefined scenario, can provide a very strong benefit in facilitating operators' handling undesired operations. This simulator consists of computer system and applications, and the purpose of applications is to generate the power and voltage and analyze the AC substation and DC railway, respectively. This paper describes a novel approach to the new techniques for AC/DC hybrid simulation for the operator training simulator in the railway system. We first propose the structure the database of railway system. Then, topology processing and power flow using a linked-list method based on the proposed database, full or decoupled newton-rapshon methods are presented. Finally, the interface between the analysis for AC substation using a newton-rapshon method and the analysis for DC railway system using a time-interval power flow method is described. We have verified and tested the developed algorithm through the extensive testing for the proposed test system. To demonstrate the validity of the developed algorithm, comparative simulations between the proposed algorithm and PSS/E for the test system were conducted.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.590-593
• /
• 2011

Time goes on, Ad Hoc network is hot issues. So far, there are a lot of protocols have been proposed for Ad Hoc routing protocol to support the mobility. This paper presents an enhanced DSDV(Destination-Sequenced Distance Vector) routing protocol which nominates one node to take care of a specific area. Simply Area-Aware(AA) DSDV routing protocol has one nominee to take care of some area. It has two jobs. One is to take care of its neighbour and another is to transfer the routing table to its other node as it works. It is called as Area Nominee(AN). The new scheme extends the routing table to include the nominee in the area. The general node is the same as the previous DSDV routing protocol. In the other hands, the node which is nominated has two routing protocols. One is for Regional Routing(RR) table which is the same routing table in DSDV. Another is Global Routing(GR) table which is about the area round its area which it cares nearby. GR table is the table for the designated node like the nominee. Each area has one nominee to transfer between ANs. It has only nominee's information about every area. This concept decreases the topology size and makes the information of topology more accurate.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.7
• /
• pp.1868-1879
• /
• 1996

There are limitations to process high bandwidth traffic in B-ISDN with mesh- topology single bus architecture of current mobile communication system. And, it is impossible to import ATM switch using fixed length packet rather than variable length packet. Some implementations are able to process variable length packet, but there are some problems such as pre-processing for synchronization and bit delay. In this paper, we design a concentrator that can manipulate variable length packet without additional pre-process. There is on bit delay for packet starting signal in input interface, So it is more efficient to process packets, such that the concentrator can reduce he processing time as $\ulcornerlog2N\lrcorne＋1$ bit-time rather than N bit-time delay in ordinary concentrator. It is expected that the mobile communication system with partial mesh topology bus adopting the knockout switch architecture can process high bandwidth traffic in B-ISDN.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.291-299
• /
• 2016

To enhance network efficiency, named-data networking (NDN) implements data caching functionality on intermediate network nodes, and then the nodes directly respond to request messages for cached data. Through the processing of request messages in intermediate node, NDN can efficiently reduce the amount of network traffic, also solve network congestion problems near data sources. Also, NDN provides a data authenticate mechanism so as to prevent various Internet accidents caused from the absence of an authentication mechanism. Hence, through applying NDN to various smart IT convergence services, it is expected to efficiently control the explosive growth of network traffic as well as to provide more secure services. Basically, it is important factors of NDN which data is cached and where nodes caching data is located in a network topology. This paper first analyzes previous works caching content based on the popularity of the content. Then ii investigates the hitting rate of caches in each node of a network topology, and then propose an improved caching scheme based on the result of the analyzation. Finally, it evaluates the performance of the proposal.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.5
• /
• pp.1-7
• /
• 2004

A regular logical topology requires little processing time for routing purposes which may be a desirable property for high-speed networks. Asymmetric bilayered ShuffleNet, proposed by us as a logical topology, can be used to a wavelength division multiplexing ring network to increase the network capacity compared to ShuffleNet. In this paper, asymmetric bilayered ShuffleNet is imbedded on a wavelength division multiplexing ring with the objective of minimizing the total number of wavelengths assigned.

• The KIPS Transactions:PartC
• /
• v.15C no.3
• /
• pp.199-204
• /
• 2008

Controller Area Network was developed originally for in-vehicle communication network. But it is now widely used for factory automation because of its properties such as strong noise resistance and high reliabilities. With changing communication environments from peer to peer topology to bus topology, we should check each devices about not only mechanical operations but also electronic or software operations. In this paper, we suggest reliability test environment for CAN based system, which is divided two parts, data correctness and timely delivery.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.9
• /
• pp.1184-1201
• /
• 1995

Two multiple access protocols are proposed for a multichannel WDM optical fibre local area network or metropolitan area network in which users are interconnected using a passive star topology. Each user has a single tunable transmitter and a single tunable receiver. A transmitter sends a control packet before its data packet transmission so that its intended receivers can tune to the proper data channel wavelength. The maximum throughput of the proposed protocols are independent of the effective normalized propagation delay which may include the transmitter and receiver tuning times and the processing delays. The maximum throughputs of the protocols are analyzed and compared with those of the existing ones by numerical examples. The message delay of the R- Aloha/synchronous N-server switch protocol which is suitable for the queued users is also analyzed.

• The KIPS Transactions:PartC
• /
• v.11C no.3
• /
• pp.401-408
• /
• 2004

The Bluetooth Scatternet based on tree structure has several merits such as small numb of links and simple routing method. This paper proposes an algorithm which satisfies the constraints of Bluetooth Specification and forms the topology of scatternet as close as the tree structure that has the shortest average inter-node distance among trees. Also we show that the proposed method reduces the average hop count between any two devices compared to early works without higher formation delay by a simulation.

• The KIPS Transactions:PartA
• /
• v.15A no.1
• /
• pp.27-34
• /
• 2008

In this paper, We propose a new parallel computer topology, called the Postorder Fibonacci Circulants and analyze its properties. It is compared with Fibonacci cubes, when its number of nodes is kept the same of comparable one. Its diameter is improved from n-2 to $[\frac{n}{3}]$ and its topology is changed from asymmetric to symmetric. It includes Fibonacci cube as a spanning graph.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1029-1034
• /
• 2004

Recent engineering process requires fast development and manufacturing of the products. This paper mainly discusses the process of rapid product development (RPD) from the reverse engineering to the optimal design. A laser scanning system scans a product and the efficient data processing method reduces the scanned point data. The reduced (scanned) points model is transformed to a finite element model without the construction of a CAD model. Since CAD modeling is a time-consuming work, skipping this step can save much time. This FE model is updated from the result based on the structural characteristics from modal test of the real model. For FE model updating, Response Surface Method is adopted. Finally, the updated FE model is optimized using the reliability-based topology optimization, which is developed recently. All these processes are applied to the design of an upper part model of a cellular phone.