• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.11a
• /
• pp.219-222
• /
• 2006

Architecture is builded on the ground and affected environment which include shape of topography and situation. What this study saying is the analysis about the relation between the concept of structural geomorphology and the space modern architecture. As there are many issue about boundary of space and organic architecture, It is important what study about structural geomorphology In paper, we will aware that there are many similarities between architecture and topography. Notion of folded structure in structural geomorphology is connected with continuity or infinity. This is one of many example.

• Journal of the Speleological Society of Korea
• /
• no.80
• /
• pp.5-9
• /
• 2007

Ulleungdo and Dokdo is special island to all Korean people, The purpose of this study is to collect, sorting, analysis and rearrangement the photo data. The data collected from the published books and new photos. The quantity of data is so big, that it is necessary to divide the volume to publishing the books. For example, aerial photos(including marine topography), the relief of surface, culture and history, urban and settlement, sightseeing and economy, maps and figure and etc. The effect of the study is clear to the civics and students about patriotic sentiment etc.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.119-127
• /
• 1993

Recently, ADI scheme has been a most common tool for solving shallow water equation numerically. But ADI models of tidal flow is likely to cause so called ADI effect in such a region of the Yellow Sea which shows complex topography and has submarine canyons especially. To overcome this, a finite difference algorithm is developed which adopts fully implicit method and preconditioned conjugate gradient squared method. Applying the algorithm including simulation of intertidal zone to Sae-Man-Keum. velocity fields and flooding/drying phenomena are simulated well in spite of complex topography.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.11a
• /
• pp.136-145
• /
• 1999

This paper describes the surface roughness effect in parallel thrust bearing. In mixed lubrication, some contacts will take place between asperities, and partial lubrication will occur. An average Reynolds Equation is utilized to determine effects of surface roughness on partially lubricated contacts. By using an autocorrelation function for the surface profile, surface model is generated numerically Although the two surfaces are parallel in thrust bearing separated by thin film, the pressure peak is formed due to asperites. By means of surface profile parameters, it is shown that which surface is optimal for the parallel thrust bearing.

• Economic and Environmental Geology
• /
• v.33 no.4
• /
• pp.321-332
• /
• 2000

The purpose of this study is to analyze landslide that occurred in Yongin area in 1991 using spatial database. For this, landslide locations are detected from aerial photographs interpretation and field survey. The locations of landslide, topography, soil, forest and geology were constructed to spatial database using Geographic Information System (GIS). To establish occurrence factors of landslide, slope, aspect and curvature of topography were calculated from the topographic database. Texture, material, drainage and effective thickness of soil were extracted from the soil database, and type, age, diameter and density of wood were extracted from the forest database. Lithology was extracted from the geological database, and land use was classified from the TM satellite image. Landslide was analyzed using spatial correlation between the landslide and the landslide occurrence factors by bivariate probability methods. GIS was used to analyze vast data efficiently and statistical programs were used to maintain specialty and accuracy. The result can be used to prevention of hazard, land use planning and construction planning as basic data.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2006.06a
• /
• pp.60-65
• /
• 2006

Previous studies demonstrated that laser ablation under transparent liquid can result in ablation enhacement and particle removal from the surface. In this work, the liquid-assisted excimer laser ablation process is examined fer polyethylene terephthalate (PET), polymethyl methacrylate (PMMA), Si, and alumina with emphasis on ablation enhacement, surface topography, and debris formation. In the case of PET and PMMA, the effect of liquid is analyzed both fer thin water film and bulk water. As the ablation enhanement by liquid is already known for Si and alumina, the analysis focuses on surface topography and debris formation resulting from the liquid-assisted laser ablation process. The results show that application of liquid increases the ablation rate of PMMA while that of PET remains unchanged even in the liquid-assisted process. It is also revealed that the liquid can significantly improve the surface quality by reducing the debris deposition. However, the surface roughness is generally deteriorated in the liquid-assisted process. The surface toporaphy is found to be strongly dependent on the method of liquid application, i.e., thin film or bulk liquid.

• Journal of Environmental Science International
• /
• v.10 no.2
• /
• pp.135-142
• /
• 2001

In order to investigate horizontal wind field in the boundary layer around Pusan area, wind speed and wind direction measured at 14 AWS(Automatic Weather Station), 1997, was used. The wind direction at PRM(Pusan Regional Meterological Office) was showed that southwest and northeast wind dominated for spring and summer, northeast wind for fall and northwest for winter. Anticline flow was showed at \`Gaekumm\` which is located between Mt. Backyang(641m) and Mt. Yumkwang(503m) and affected on wind field at \`Pusanjin\`. The low wind speed and various wind direction was represented at the basin topography, \`Buckgu\`, \`Jeasong\`, \`Ilkwang\` and \`Kijang\`. The annual mean wind speed at 14 sites, 2.5ms(sup)-1, was lower than that measured at PRMO, 3.9ms(sup)-1. The wind direction analysis showed that the case of same direction in compare with that measured at PRMO is about 54% and case of opposite direction is about 12%. Annual and seasonal mean windrose showed wind direction is affected by not only synoptic weather state but also topography.

• Journal of Korea Water Resources Association
• /
• v.35 no.6
• /
• pp.677-684
• /
• 2002

In this study, a finite element model is employed to simulate the diffraction of waves caused by a change of water depths. The model is firstly applied to the estimation of reflection coefficients of monochromatic waves over a sinusoidally varying topography. Predicted coefficients are compared with those of the eigenfunction expansion method and laboratory measurements. A good agreement is observed. The model is then used to investigate effects of heights of bottom topography and number of ripples on variation of reflection coefficients of monocromatic water waves.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.261-268
• /
• 2018

The study used the simplified flooding analysis model, SIMOD, to distribute the total flood discharge by time, so research on flooding in urban areas can be conducted. The conventional flooding analysis models have limitations in constructing input data and take a long time for analysis. However, SIMOD is useful because it supports rapid decision-making process using quick modeling based on simple hydrological data, such as topography and inflow flood of the study area, to analyze submerged routes formed by flooding. Therefore, the study used the SIMOD model to analyze flooding in urban areas before conducting a comparative study with the outputs from FLO-2D, which is one of the conventional flooding analysis models, to identify the model's applicability. Seongseoje was selected as the study area, as it is located downstream the Geumho river where streams flow in the adjacent areas, and dikes are high enough to apply the "Overflow and Break" scenario for urban areas. With regard to topography, the study applied DEM data for the conventional flooding analysis and DSM data to represent urban building communities, distribution of roads, etc. Input flood discharge was calculated by applying the rectangular weir equation under the bank and break scenario through a 200-year return period of a design flood level. Comparative analysis was conducted in a flooded area with a simulation time of 1-24 hours. The time for the 24-hour simulation in SIMOD was less than 7 minutes. Compared with FLO-2D, the difference in flooded areas was less than 20%. Furthermore, the study identified the need for topography data using DSM for urban areas, as the analysis result that applies DSM showed the influence of roads and buildings.

• Korean Journal of Remote Sensing
• /
• v.22 no.4
• /
• pp.243-253
• /
• 2006

As the ocean and beaches have suffered from the losses of sand, it is necessary to monitor the zones that are prone to erosion continuously with the object of the long-term management. However, each ward offices are busy trying to supply sand without analyzing the marine and beach topographic changes. Therefore a long term effect of erosion has not been shown. In this study, we proposed methods to collect accurate spatial data of the oceans and beaches through sounding and GPS surveys, and detected and analyzed topographic changes quantitatively and qualitatively, by using an integrated RS and GIS techniques. The result of this study revealed that the marine topography has been eroded for 25 years, because of the straight construction of the river and the vast development of urban features, in addition with change of the mean depth 0.40 m, the water surface area 11,028 $m^2$, and submarine volume 2,207,884 $m^3$. The beach topography has accreted for 5 years and the change of the mean elevation is 0.27m, the area 6,501 $m^2$, and volume 25,667 $m^3$, because of the installation of geogrids and the seasonal effect. We conducted monitoring works on the topographic survey of the ocean and beaches and analyzed the present condition of the coastal erosions. Therefore, it is estimated that necessary information on the supply of sand, the safe marine leisure and the management of bating place could be provided.