• The korean journal of orthodontics
• /
• v.46 no.5
• /
• pp.280-289
• /
• 2016

Objective: The aim of this study was to analyze tooth movement and arch width changes in maxillary dentition following nonextraction treatment with orthodontic mini-implant (OMI) anchorage in Class II division 1 malocclusions. Methods: Seventeen adult patients diagnosed with Angle's Class II division 1 malocclusion were treated by nonextraction with OMIs as anchorage for distalization of whole maxillary dentition. Three-dimensional virtual maxillary models were superimposed with the best-fit method at the pretreatment and post-treatment stages. Linear, angular, and arch width variables were measured using Rapidform 2006 software, and analyzed by the paired t -test. Results: All maxillary teeth showed statistically significant movement posteriorly (p < 0.05). There were no significant changes in the vertical position of the maxillary teeth, except that the second molars were extruded (0.86 mm, p < 0.01). The maxillary first and second molars were rotated distal-in ($4.5^{\circ}$, p < 0.001; $3.0^{\circ}$, p < 0.05, respectively). The intersecond molar width increased slightly (0.1 mm, p > 0.05) and the intercanine, interfirst premolar, intersecond premolar, and interfirst molar widths increased significantly (2.2 mm, p < 0.01; 2.2 mm, p < 0.05; 1.9 mm, p < 0.01; 2.0 mm, p < 0.01; respectively). Conclusions: Nonextraction treatment with OMI anchorage for Class II division 1 malocclusions could retract the whole maxillary dentition to achieve a Class I canine and molar relationship without a change in the vertical position of the teeth; however, the second molars were significantly extruded. Simultaneously, the maxillary arch was shown to be expanded with distal-in rotation of the molars.

• Restorative Dentistry and Endodontics
• /
• v.26 no.6
• /
• pp.464-484
• /
• 2001

When restoring a tooth, the dentist tries to choose the ideal material for existing situation. One criterion that is considered is its suitability for restoring coronal strength. As more tooth structure is removed, the cusps are weakened and susceptible to fracture. Further, this increased deformation may cause the formation of intermittent gaps at the margin between the hard tissue and the restoration, facilitating marginal leakage. The improvements in ceramic materials now make it possible for alternatives to amalgams, composites, and cast metal to be of offered for posterior teeth. Of the materials used, ceramics most closely approximates the properties of enamel. The introduction of computer-aided design/computer-aided manufacture(CAD/CAM) systems to restorative dentistry represents a major technological breakthrough. It is possible to design and fabricate ceramic restorations at a single appointment. Additionally, CAD/CAM systems eliminate certain errors and inaccuracies that are inherent to the indirect method and provide an esthetic restoration. The aim of this investigation was to study the loading characteristics of CAD/CAM ceramic inlay and to compare the stress distribution and displacement associated with different designs of cavity(the isthmus width and cavity depth). A human maxillary left first premolar was prepared with standard mesio-occlusal cavity preparation, as recommended by the manufacturer Ceramic inlay was fabricated with CEREC 2 CAD/CIM equipment and cemented into the prepared cavity. Three dimensional model was made by the serial photographic method. The cavity width was varied $\frac{1}{3}$, $\frac{1}{2}$ and $\frac{2}{3}$ of intercuspal distance between buccal and lingual cusp tip. The cavity depth was varied 1.5mm and 2.3mm. So six models were constructed to simulate six conditions. A point load of 500N was applied vertically onto the first node of the lingual slope from the buccal cusp tip. The stress distribution and displacement were solved using ANSYS finite element program(Swanson Analysis System). (omitted)

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.1
• /
• pp.122-134
• /
• 2000

The aim of this study is (1) to establish the baseline information concerning the width of keratinized gingiva, depth of gingival sulcus and width of attached gingiva on the buccal surface of the teeth: and (2) to determine the relationship between the above values and tooth eruption: and (3) to estimate the frequency of mucogingival problems. The results were as follows; 1. The mean width of attached gingiva of the children aged $6\sim12$ proved to be wider in the maxilla than in the mandible. Of the primary teeth, the widest width was found in the areas of maxillary primary lateral incisors and maxillary primary canines(3.50mm and 3.55mm). The narrowest was noted in the area of mandibular first primary molars(1.34mm) In the permanent dentition, the greatest width was found in the areas of maxillary permanent lateral incisors (3.00mm). The narrowest was noted in the area of mandibular first premolars(0.55mm). 2. In the primary dentition, the width of attached gingiva of primary canines and first and second primary molars became wider from the age of six as the age increased. In the permanent dentition of the boys, only mandibular central incisors and maxillary first molars showed the tendency towards increase in the width of attached gingiva with increasing age. In the permanent dentition of girls, central and lateral incisors of both jaws and maxillary first molars showed statistically significant increase in the width of attached gingiva with increasing age(p<0.05). 3. At the age of tooth change, the attached gingiva of primary teeth were almost wider than those of successive permanent teeth (p<0.05). 4. During the period of 6 to 12 years of age, the width of keratinized gingiva and the depth of gingival sulcus of permanent tooth at the age of twelve were larger than those of primary tooth at the age of six (p<0.05). 5. The maximum in the frequency of mucogingival problems was found in the areas of upper and lower first primary molars of primary dentition, and in the upper and lower first premolars of permanent dentition regardless of sex. The frequency was higher in primary teeth than in the corresponding successive permanent teeth These teeth showed tendency towards increase in mucogingival problems with age.

• Journal of Periodontal and Implant Science
• /
• v.47 no.1
• /
• pp.41-50
• /
• 2017

Purpose: The aims of the present study were to compare the image quality and visibility of tooth cracks between conventional methods and swept-source optical coherence tomography (SS-OCT) and to develop an automatic detection technique for tooth cracks by SS-OCT imaging. Methods: We evaluated SS-OCT with a near-infrared wavelength centered at 1,310 nm over a spectral bandwidth of 100 nm at a rate of 50 kHz as a new diagnostic tool for the detection of tooth cracks. The reliability of the SS-OCT images was verified by comparing the crack lines with those detected using conventional methods. After performing preprocessing of the obtained SS-OCT images to emphasize cracks, an algorithm was developed and verified to detect tooth cracks automatically. Results: The detection capability of SS-OCT was superior or comparable to that of trans-illumination, which did not discriminate among the cracks according to depth. Other conventional methods for the detection of tooth cracks did not sense initial cracks with a width of less than $100{\mu}m$. However, SS-OCT detected cracks of all sizes, ranging from craze lines to split teeth, and the crack lines were automatically detected in images using the Hough transform. Conclusions: We were able to distinguish structural cracks, craze lines, and split lines in tooth cracks using SS-OCT images, and to automatically detect the position of various cracks in the OCT images. Therefore, the detection capability of SS-OCT images provides a useful diagnostic tool for cracked tooth syndrome.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.17 no.4
• /
• pp.257-274
• /
• 2001

To properly prepare teeth, dentists require a direct view of the working area and are often placed in a difficult position, moreover, a high proportion of dentists suffer from headache and back pain. Dentists who make use of the dental mirror and position their patients carefully to gain a proper view report less headache, pain and discomfort in the shoulders. It is recommended that dentists learn the "Home Position(H.P.)" which among the various "Random Position(R.P.)" methods, enables dentists to approach their patients in a stable posture. The purpose of this study was to compare tooth preparation in the H.P. and the R.P., and evaluate the clinical efficacy of the H.P.. Tooth preparation for a full cast crown was performed on the maxillary left 1st molar using the H.P. and the R.P., and the shapes of the prepared tooth surfaces at the two different operating positions were compared. The amount of occlusal reduction, marginal width, height, and axial taper were measured and analyzed. A T-test was performed separately to compare the results of the H.P. and the R.P. with respect to the accuracy of the corresponding tooth reduction. The results were as follows. ; 1. The amount of occlusal reduction was excessive on the mesiobuccal cusp(P<0.05), and deficient on the lingual cusp in the H.P.(P<0.01). In the R.P., this was excessive on the buccal cusp and deficient on the fossa and distolingual cusp(P<0.01). 2. The amounts of marginal width were excessive in all areas except on the lingual and mesial surfaces in the H.P. and lingual surface in the R.P.(P<0.01). 3. The marginal heights were achieved more accurately in the R.P. than the H.P.(P<0.01). 4. Axial surface taper was excessive in all areas in the H.P.(P<0.01). But the axial taper of measured areas was even, and tooth is more like to retain its original axis after reduction. In the R.P., axial surface taper was excessive on the mesial and buccal area, and deficient on the distolingual area(P<0.01), and therefore, the axis of the prepared teeth was tipped in the distolingual direction. 5. The times needed for preparation were 12 minutes and 49 seconds in the H.P., and 11 minutes and 35 seconds in the R.P., and the R.P. was statistically faster(P<0.01). The tooth preparation in the H.P. achieved its goal, in that it enabled the operator to make even tooth reduction. In conclusion, the H.P. system offers an improved method that can be used in clinic after specific training.

• Journal of dental hygiene science
• /
• v.6 no.1
• /
• pp.29-34
• /
• 2006

This study was undertaken to compare the tooth and arch size between crowding patient and normal subjects. Two group of dental casts were selected on the basis of crowding patients and normal subjects. One group, consisting of 40 pair of dental casts(20 male and 20 female), exhibited noncrowded dentitions. A second group, consisting of 40 pairs of dental cast(21 male and 21 female), exhibited remarkably crowding need for orthodontic treatment. Tooth width measurements were made with a sliding digital caliper with Vernier scale neared 0.01 mm. Mean, standard deviation, T-test of the following parameters were used to compare two group : individual mesiodistal crown widths, arch width and arch length. The following result were obtained. In the mesiodistal crown widths, normal subjects had generalized larger teeth than Wheeler's results(human tooth size index), except for maxillary central incisor, maxillary 2nd premolar, mandibular canine, and mandibular 1st molar. In the orthodontic patients with crowded dentitions, the mesiodistal tooth crown widths were generalized larger teeth than noncrowded normal subjects. In the arch width and arch length, the crowded dentition group had smaller arch width and arch length than the normal group.

• Imaging Science in Dentistry
• /
• v.49 no.4
• /
• pp.257-263
• /
• 2019

Purpose: This study was performed to evaluate the dimensional accuracy of digital dental models constructed from cone-beam computed tomographic (CBCT) scans of polyvinyl siloxane (PVS) impressions and cast scan models. Materials and Methods: A pair of PVS impressions was obtained from 20 subjects and scanned using CBCT (resolution, 0.1 mm). A cast scan model was constructed by scanning the gypsum model using a model scanner. After reconstruction of the digital models, the mesio-distal width of each tooth, inter-canine width, and inter-molar width were measured, and the Bolton ratios were calculated and compared. The 2 models were superimposed and the difference between the models was measured using 3-dimensional analysis. Results: The range of mean error between the cast scan model and the CBCT scan model was -0.15 mm to 0.13 mm in the mesio-distal width of the teeth and 0.03 mm to 0.42 mm in the width analysis. The differences in the Bolton ratios between the cast scan models and CBCT scan models were 0.87 (anterior ratio) and 0.72 (overall ratio), with no significant difference (P>0.05). The mean maxillary and mandibular difference when the cast scan model and the CBCT scan model were superimposed was 53 ㎛. Conclusion: There was no statistically significant difference in most of the measurements. The maximum tooth size difference was 0.15mm, and the average difference in model overlap was 53 ㎛. Digital models produced by scanning impressions at a high resolution using CBCT can be used in clinical practice.

• The korean journal of orthodontics
• /
• v.38 no.4
• /
• pp.265-274
• /
• 2008

Objective: The aim of this study was to evaluate the potency of panoramic radiography for the detection of maxillary impacted canines. Methods: Twenty-five patients were selected, comprised of 7 males (mean age: 10.9 years, range: 8.5 - 14.5 years) and 18 females (mean age: 10.9 years, range: 8.2 - 15.7 years). In total, thirty-five maxillary impacted canines were estimated. The position of the canine and root resorption of adjacent teeth were evaluated on panoramic radiography and 3D CT. Results: Except for angulation to the occlusal plane, the other parameters, such as tooth length, crown width, vertical distance and lateral shift showed larger values on panoramic radiography compared to 3D CT. In palatally impacted cases, the angulation of canine was smaller, and the vertical distance to the occlusal place was larger on panoramic radiography than 3D CT. For labially impacted canines, tooth length, crown width, and angulation to the occlusal plane were similar for the two methods. The sensitivity for detecting root resorption on panoramic radiography was calculated as being 33.3% of 3D CT. Conclusions: The position of labially impacted canines can be effectively estimated using panoramic radiography, but palatally impacted canines need further investigation such as 3D CT for proper diagnosis.

• The korean journal of orthodontics
• /
• v.24 no.4 s.47
• /
• pp.773-785
• /
• 1994

It has been generally believed that the impaction or eruption of mandibular third molars has significant correlations with the growth of the mandible, size of mandibular arch and size of teeth. The purpose of this study was to examine if there is any correlation between the status of eruption of mandibular third molars and the amount of mandibular crowding. The effect of missing of third moalrs to mandibular crowding was studied as well. 140 adult students of Yonsei University were selected and divided into three groups according to the status of mandibular third molars, Group 1) congenital missing group, Group 2) eruption group, and Group 3) impaction group. The tooth size, dimensions of the mandibular dental arch, and the amount of crowding were measured and compared. Results were as follows ; 1. There was no statistically significant difference in tooth size between the missing group and the eruption group(p<0.05). Impaction group showed larger total tooth material, inci- sal tooth material, and individual tooth size except central incisors compared to missing group (p<0.05). Impaction group showed larger total tooth material, incisal tooth material compared to eruption group as well(p<0.05). When individual tooth size was compared, impaction group had larger central incisors, canines, and second premolars than eruption group(p<0.05). 2. Missing group showed larger intermolar width than impaction group and it was stati- stically significant(p<0.05). 3. When compared the amount of total crowding, impaction group showed the largest am- ount of crowding, then eruption group, and missing group showed the least amount of crowding respectively(p<0.05). There was no statistically significant difference between missing stoup and eruption group in the amount of incisal crowding(p<0.05). Impaction group show- ed the largest amount of incisal crowding among all three groups(p<0.05).

• Journal of Periodontal and Implant Science
• /
• v.28 no.3
• /
• pp.517-523
• /
• 1998

The purpose of this study was to investigate the width of attached gingiva of young adults with healthy gingiva. We compared the differences according to the tooth location. The width of attached gingiva of maxilla and mandible was measured by histochemical method. The results were as follows: 1. The width of buccal keratinized gingiva in maxilla was widest in incisors(5.2-5.6mm) and narrowest in first bicuspids(4.4-4.5mm). 2. The width of buccal keratinized gingiva in mandible was widest in incisors(4.3-4.5mm) and narrowest in first bicuspids(3.2-3.3mm). 3. The width of lingual keratinized gingiva in mandible was widest in first molars(5.5-5.6mm) and narrowest in incisors(2.9-3.0mm). 4. The width of buccal attached gingiva in maxilla was widest in incisors(4.1-4.4mm) and narrowest in molars (3.0mm). 5. The width of buccal attached gingiva in mandible was widest in incisors(3.2-3.4mm) and narrowest in second molars (1.7-1.8mm). 6. The width of lingual attached gingiva in mandible was widest in first molars(3.5-3.7mm) and narrowest in incisors(1.9-2.1mm).