• 대한소아치과학회지
• /
• 제8권1호
• /
• pp.55-63
• /
• 1981

The purpose of this study is to observe the effect of formocresol and glutaraldehyde to tooth germs and periapical tissues after perforation of interradicular portion of pulpal floor and application of physiological saline solution in control groups, formocresol and glutaraldehyde in experimental groups. The following results were obtained 1. In control groups, normal healing processes were seen, and, on the sixteenth day, the epithelization of injured areas was completed. Inflammatory reactions were limited to the injured surface, and the underlying alveolar bone were normal and successive tooth germs were normal. 2. In both formocresol groups and glutaraldehyde groups, tissue reactions were identical. Inflammatory reactions were slightly compared with control groups, but the surface epithelizations were delayed compared with control group. 3. In both formocresol and glutaraldehyde groups, necrosis was seen in superficial tissue of bone marrow, and, at 24th day, center area of bone marrow on the successive tooth germs were losed and replaced with connective tissue, and superficial soft tissue of the injured area was connected with soft tissue on the successive tooth germ. In remaining alveolar bone, osteoclastic reaction was remarkable. 4. In both formocresol and glutaraldehyde groups, there is no injury to the successive tooth germs. 5. In both formocresol and glutaraldehyde groups, periodontal membrane was normal, but the partial resorption of cementum and dentin near the injured area were seen.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.283-296
• /
• 2020

A numerical model is established to investigate the run-up of a solitary wave after propagating over a triangular saw-tooth-shaped submerged breakwater. A rectangular-shaped submerged breakwater is simulated for comparison. Several factors, including the submerged depth, the lagoon length and the beach slope, are selected as independent variables. The free surface motions and velocity fields of the solitary wave interacting with the submerged breakwater are discussed. The results show that the submerged depth and lagoon length play significant roles in reducing the run-up. The influence of the beach slope is not significant. At the same submerged depth, the triangular saw-tooth-shaped submerged breakwater has only a slightly better effect than the rectangular-shaped submerged breakwater on the run-up reduction. However, a calmer reflected wave profile could be obtained with the rougher surface of the saw-tooth-shaped submerged breakwater. The study conclusions are expected to be useful for the conceptual design of saw-tooth-shaped submerged breakwaters.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.251-257
• /
• 2000

A numerical simulation of the temperature rise for sliding surface in dry contact is based on Jaeger's formula combined with a calculated heat input. A gear tooth temperature analysis was performed. The pressure distribution has the Hertzian pressure distribution on the heat source. The heat partition factor is calculated along line of action. A Temperature distribution of tooth surface is calculated about before and after profile modification. A Temperature of addendum and deddendum in modified gear have reduced.

• 동력기계공학회지
• /
• 제13권6호
• /
• pp.102-109
• /
• 2009

A retarder, as a supplementary brake system that is not friction-based, is frequently used in heavy-duty vehicles generally to slow the vehicles down on inclines. The electric retarder mainly used in a heavy-duty bus is generally placed between the transmission and the axle. The rotor inside the retarder system is attached to the axle. The operation of the retarder within a driven vehicle generates reverse torque due to coast driving force on hypoid gears in the differential gear system. By the reverse torque, scoring or scuffing on the hypoid gear teeth may directly occur. The scoring may be generated due to excessive contact stresses on the tooth surface. In this study, tooth contact stresses and contact patterns were analysed in order to investigate on the tooth scoring phenomenon using a finite element analysis program T900 in which the Hertzian contact stress formula was taken. Backlash, wear and surface finish were considered in the finite element simulation on the scoring.

• 구강회복응용과학지
• /
• 제19권1호
• /
• pp.35-41
• /
• 2003

With the understanding of tooth crown biomechanics and the progress of dentin adhesives, bonded porcelain restorations including a porcelain laminate veneer present an extended spectrum of indications for anterior teeth. Porcelain laminate veneer as a restoration offers the conservative solution that balances the functional and esthetic needs of the anterior dentition. Porcelain's stiffness, its surface characteristics, and the biomechanical strength achieved through bonding to tooth surface enable the restoration of the tooth as a whole supporting occlusal force and masticatory function. Namely, the optical effects inherent in the tooth and the lifelike features of the porcelain make that this restoration approaches the ultimate in esthetic satisfaction for both the dentist and the patient. A 49-year-old female patient with the incisal discoloration of upper central incisors and black triangle between the central incisors was referred to correct her esthetic problems with prosthodontic approach. The patient was satisfied with two porcelain laminate veneers that were made according to prof. Magne and Belser's recommendation.

• 한국임상수의학회지
• /
• 제39권1호
• /
• pp.23-27
• /
• 2022

An 11-year-old spayed female Maltese dog presented with mass in oral cavity. On conscious oral examination, the right maxillary canine tooth was not visible, and a lesion has been suspected of mass existed in canine tooth area. The adjacent maxillary first premolar was buried in the lesion, with a little part of the tooth exceptions. On radiographic examination, the canine tooth was buried horizontally in the lesion, and the root part was adjacent to the first premolar tooth. Extraction was performed for a treatment. When the lesion was incised, the canine tooth was horizontal with the concave surface facing the palatal, and formed double teeth by fusing with the premolar tooth at the roots parts of the teeth. This report described the double teeth in the dentigerous cyst rarely reported in dogs.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.380-384
• /
• 1997

This study was performed to understand the exogenous-water-drop induced thermomechanical effect on the tooth in the free-running Er:YAG laser mode for the proper use of water as a laser energy absorber and coolant in dentistry. The ree-running Er:YAG laser was used in the dental hard tissue ablation study. A Microjet system was employed to dispense precise water drops. Ablation rate, recoil momentum, and temperature rise in the pulp cavity were measured with and without an exogenous water drop on the tooth surface. Exogenous water enhanced ablation rate in the thick tooth in which the ablation rate on the dry surface does not increase linearly but shows plateau. Optimal exogenous water volume was shifted from 2 nl to 4 nl as the laser energy was increased from 48 mJ to 145 mJ. The magnitude of the recoil momentum was increased as the volume of exogenous water increased. The results of this study suggest that we must pay attention to the recoil momentum or recoil pressure study or the optimal and safe usage of water in the dental treatment because these mechanical effects depend on the volume of exogenous water on the tooth surface.

• 한국융합학회논문지
• /
• 제12권12호
• /
• pp.153-159
• /
• 2021

본 연구의 목적은 시판되고 있는 청포도 주스와 석류 주스의 노출 시간에 따른 치아 표면 변화에 대한 위험성을 융복합적으로 확인하고자 한다. 발치된 건전 치아를 사용하였으며, 접촉시간에 따른 구분으로 총 8그룹으로 대조군과 10 ml의 시판되는 청포도 주스와 석류 주스를 1, 3, 5, 15, 30, 60, 120분 적용한 실험군 7그룹으로 나누었다. 실험 주스의 pH가 측정되었고 표면의 변화와 미세 형태는 주사전자현미경(Scanning Electron Microscope:SEM)을 통하여 확인하였다. 본 실험에 사용된 청포도 주스는 3.9±0.02, 석류 주스는 3.5±0.01로 제조사가 명시한 주스의 pH 범위보다 청포도 주스는 약간 높았지만 석류 주스는 낮았다. SEM을 통한 결과에서도 대조군과 비교하여 치아 표면의 손상이 생겼다. 접촉 시간이 증가될수록 표면의 손상은 증가되었다. 연구의 결과를 바탕으로 음용 횟수나 구강 내 저류 시간을 줄이고, 치과 임상에서 치아 침식증 환자에게 질환의 진행을 낮출 수 있는 과일 주스에 대한 정확한 정보를 제공해야 할 것이다.

• 치위생과학회지
• /
• 제18권4호
• /
• pp.218-226
• /
• 2018

불소 적용 후 교정용 브라켓 접착제 종류에 따른 불소의 재흡수성과 표면의 변화를 비교 평가하고자 하였다. 불소가 방출되지 않은 복합레진 Transbond $XT^{(R)}$, 불소 방출성 복합레진 $Blugloo^{(R)}$와 $LightBond^{(R)}$, 레진강화형 글라스 아이오노머 Rely $X^{TM}$ Luting $2^{(R)}$, 재래형 글라스 아이오노머 Fuji $I^{(R)}$를 사용하였다. 시편에서 방출되는 불소 방출량을 측정하였고, 불소 재흡수 능력을 비교하기 위해서 시편에 3가지의 불소 제품(APF gel, Tooth Mousse $Plus^{(R)}$, Fluor Protector)을 도포하였으며, 불소함유 치약으로 잇솔질을 하여 불소방출량 변화를 측정하였고, 표면조도 측정기와 FE-SEM을 이용하여 시편의 표면 조도 및 변화를 비교 평가하였다. Rely $X^{TM}$ Luting $2^{(R)}$와 Fuji $I^{(R)}$에서는 다른 불소 제품인 Tooth Mousse $Plus^{(R)}$, Fluor Protector뿐만 아니라 불소함유 치약으로 잇솔질한 후에도 불소의 재흡수량을 관찰할 수 있었다. Tooth Mousse $Plus^{(R)}$를 도포한 후에는 Transbond $XT^{(R)}$를 제외하고 표면 조도 값이 유의하게 증가하였으며, 모든 교정용 접착제에서 부분적인 미세 필러 입자의 탈락을 보였다. Fluor Protector를 도포한 후에는 Transbond $XT^{(R)}$, Rely $X^{TM}$ Luting $2^{(R)}$를 제외하고 표면 조도 값이 유의하게 증가하였으며, 모든 교정용 접착제의 표면에 막을 형성하여 기포가 생긴 부분을 제외하고 매끄러운 양상을 나타내었다. 모든 교정용 접착제에 APF gel을 도포했을 때는 표면 조도 값이 유의하게 크게 증가하였다. 이상의 결과를 종합해 볼 때, 교정용 브라켓을 접착할 때 치아우식 예방 효과를 도모하기 위한 불소 방출량을 고려한다면 Rely $X^{TM}$ Luting $2^{(R)}$와 Fuji $I^{(R)}$가적극 추천되며, 불소 제품으로는 Tooth Mousse $Plus^{(R)}$, Fluor Protector가 APF gel보다 우수한 것으로 나타났고, 불소가 함유된 치약으로 잇솔질을 하였을 때도 치아우식을 예방할 수 있을 것으로 생각된다.

• 한국치위생학회지
• /
• 제8권1호
• /
• pp.13-22
• /
• 2008

This study compared tooth's remineralization using enamel surface artificially demineralized with 0.1M lactate and HCL solution using Vicker's Hardness Number(VHN) to compare CPP-ACP and remineralization of nano-sized Carbonate Apatite's initial caries. Using pH circulation models divided into 0% nano-CA, 5% nano-CA, 10% nano-CA, 10% CPP-ACP and D.W. they were treated for 5 minutes, three times a day for 14 days to get the following results. 1. There were no significant differences among the initial surface hardness of samples demineralized surface of front tooth in 5 groups. and all 5 groups' surface hardness reduced significantly after demineralization of enamel. 2. When inquiring into hardness changes through pH circulation model, the highest hardness change was in 5% nano-CA group. Also. 10% nano-CA and 10% CPP-ACP groups increased significantly. but there was no significant difference statistically. In generalizing the above experiment results, nano-sized Carbonate Apatite showed remineralization, and compared to 10% CPP-ACP group, 5% nano-CA had remineralization to artificial caries. thus implies that when we develop method to contact with tooth of nano-CA in the future, it is expected to gain synergy effect on function of saliva, a natural remineralization material.