• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.2
• /
• pp.194-199
• /
• 2015

In this study, experiments of welding deformation considering dog-pieces setting were performed to assess the effect of dog-pieces on welding deformations quantitatively and an analysis method of welding deformations considering dog-pieces was proposed. Experimental results show the relationship between welding deformations and dog-pieces setting quantitatively. The maximum reduction of welding deformation was measured as 74%. The proposed numerical analysis method to predict welding deformations is one of thermal elasto-plastic analyses using a circular heat flux and finite elements model and has been verified through experiments of welding deformation. The proposed analysis method is expected to be used in a variety of fields as an analysis tool to assess or establish guidelines for a proper use of dog-pieces.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.3
• /
• pp.153-168
• /
• 2011

In medium and small firm, the management system which is simple and where there is a practicality is required Ill)re than the management system which is complicated and minute of the centered around large company so that the introduction of the standard costs can be activated and it can be usefully used as a tool of management decisions. A difference between the standard costs introduction plan proposed in this paper and the preexistance study literature are as follows. In this paper, by breaking from the whole cost accounting aiming at all item, that is the traditional introduction method, and presenting the product cost accounting method by group the standards setting object was minimized and simplified. In this way, if the standards setting object is simplified, it is quick at the perimeter environment change as the little man power and flexibly it corresponds to and the cost information calculation which is exact with the setting up and maintenance of the efficient cost standard becomes available. As a result of applying for real through S corp., the usability of the method that the standard costs introduction method proposed in this paper produced the standard costs relatively short within period, it manages was verified. And the standard costs introduction method proposed in this paper went by the various cost information for each products, the management class did the management will decision which was objective and reasonable in the putting first.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.1
• /
• pp.25-32
• /
• 2011

Under limited resources such as budgets and experts, it is essential to set promotion priorities for standardization work items on IPv6 (Internet Protocol version 6) multi-networking technologies. Opinions of domain experts are surveyed and analyzed utilizing a multi-criteria decision making tool, the Analytic Hierarchy Process (AHP). Weights of ten evaluation criteria are identified and applied to calculating importance degree of eight work items. According to descending order of importance degree, priorities of work items are determined. The processes and results of this study may provide not only an approach of setting promotion priorities for standardization work items but also a practical guide of implementing of a multi-criteria decision analysis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.241-242
• /
• 2006

Spherical glass lenses are used in many optical industries. The curvature, eccentricity and height of a tool affect the surface roughness and curvature of lenses. The purpose of this study is the development and performance of a self-diagnostication ultra-precision lens polishing machine. In this paper, structure analysis is performed to reduce maximum displacement and to maintain outside the resonance region by CATIA V5. A spherical center setting gage is developed to increase accuracy of the manufactured lenses. The surface roughness, curvature and thickness of the manufactured lenses are measured and studied.

• Research in Mathematical Education
• /
• v.16 no.3
• /
• pp.155-176
• /
• 2012

It is an important issue to explore classroom environments which are conducive to developing students' mathematical performance. This study explores the effects of different classroom environments (solution-demand and corresponding-time setting) on mathematical performances. Fourteen and eighteen prospective teachers were required to prove a task under different conditions respectively: a) Cognitive demand of multiple-solution corresponding time of three hours, and b) Cognitive demand of a right solution corresponding time of 20 minutes. We used SOLO as the assessment tool for mathematical performance from quality perspective. Significant differences were found in the quantity and quality of mathematical performance. The regular environment focusing on speed and accuracy were found to be directly linked to low levels of performance. The findings above provide implications to the cognitive benefits of multiple-solution demand and corresponding time setting.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.5
• /
• pp.53-59
• /
• 2001

A screw driver is widely used in assembling machine parts or electronic products such as the printed circuit board with a housing. As the parts to be assembled becomes small and precise, the higher precision of the controlling screw driver torque is required. However, because the operator controls the fastening torque based on experience, it must be inexact and the setting procedure will be time consuming job. Thus the screw driver which can exactly control the fastening torque is developed utilizing a bellows in this paper. The bellows is expanded by the inner air pressure and contracted by the spring operation. The bellows type driver is composed of a clutch mechanism with two solenoid valves and a pressure sensor. Those valves are controlled using the detected bellows pressure by the sensor. When the pressure reaches the setting value, the exit solenoid valve is opened to release the air pressure from the bellows so as not to deliver further torque. Through a series of experiments, the performance is examined and verified.

• Journal of the Korea Society for Simulation
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2003

Recently, various network protocols have been developed to keep step with the rapid growth of Internet users. For the education of students in the computer networks classes, there have been many attempts to allow students experiment routers setting, operations and management of networks by themselves, in addition to the classroom lectures based on textbooks. One of the attempts is to install expensive real router experiment sets in laboratories for students, and one another is using router and network simulators for virtual experiments. This paper presents the design and implementation of NetSim, a scalable, component-based simulator environment for the network experimentation. NetSim expands the existing component-based JavaSim simulation tool for the education purpose, and it allows the design and experiment of various networks and protocols. For the evaluation of NetSim, it is shown that the network design and RIP-based router setting process is possible in NetSim.

• Clinical Pain
• /
• v.20 no.1
• /
• pp.7-14
• /
• 2021

Musculoskeletal ultrasound has evolved as the essential tool to diagnose and guide intervention procedures in people with neuromusculoskeletal conditions. Image optimization and understanding device operations are core components for ultrasound guided intervention procedure training. All ultrasound machines share the common operative features and there are various buttons for the features in the device control panel. Ultrasound "knobology" refers to the thorough understanding of imaging optimization. This review addressed basic information for the transducers, depth setting, gain and focus control, different modes focusing on brightness and doppler modes.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.8
• /
• pp.164-174
• /
• 1996

As tools for machining precision componants, end mills and ball end mills are widely used. For the end mills have longer cylindrical shape comparing dianeter, they are liable to deflect when machining and induce geometrical error and deterioration of surface roughness. To improve the stiffness and the sharpness of the cutting edge of end mill, a software for manufacturing end mills are developed. The program predicts the result of helical flute grinding and the configuration of cuting edge which is located in cylindrical surface. Furthermore to facilitate the manufacturing end mills using CNC grinding machine, the setting condition which satisfy the geometrical requirements like tool rake angle and stiffness are obtained.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.21 no.2
• /
• pp.63-71
• /
• 2015

Background: The purpose of the study, using the ICF Tool in the process of rehabilitation of artificial joint replacement surgery of the hip joint, goal setting and understanding of the problem, through the process of creating intervention strategies, useful clinical practical course for rehabilitation I try to present the data. Methods: Fracture was the left total hip replacement (THR) surgery due to women of 76 years old. I proceed in order screening, evaluation, diagnosis, prognosis, treatment planning and intervention, re-screening. Needs of the patient was walking short distances for using the toilet. In order to improve was carried out arbitration, after you have created a list of issues that limit the ability to walk short distances. Results: It was revealed improved results in self-paced walk test (SPWT) and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) was used to examine whether the goals. In addition, MMT VAS, DGI, and TUG is a detailed goal was improved. Conclusions: It can be shown objectively the results of interventions performed for the purpose of solving the problem which is grasped through clinical Practical course for short-range walking ability enhance patient THR. I considered practical clinical course using the ICF Tool would be useful.