• Journal of the Korean Society of Radiology
• /
• v.14 no.3
• /
• pp.203-209
• /
• 2020

The purpose of this study is to assess the mechanical stability and alignment of the patient positioning system (PPS) of Leksell Gamma Knife Perfexion(LGK PFX). The alignment of the PPS of the LGK PFX was evaluated through measurements of the deviation of the coincidence of the Radiological Focus Point(RFP) and the PPS Calibration Center Point(CCP) applying different weights on the couch(0, 50, 60, 70, 80, and 90 kg). In measurements, a service diode test tool with three diode detectors being used biannually at the time of the routine preventive maintenance was used. The test conducted with varying weights on the PPS using the service diode test tool measured the radial deviations for all three collimators 4, 8, and 16 mm and also for three different positions of the PPS. In order to evaluate the alignment of the PPS, the radial deviations of the correspondence of the radiation focus and the LGK calibration center point of multiple beams were averaged using the calibrated service diode test tool at three university hospitals in Busan and Gyeongnam. Looking at the center diode for all collimators 4, 8, and 16 mm without weight on the PPS, and examining the short and long diodes for the 4 mm collimator, the means of the validation difference, i.e., the radial deviation for the setting of 4, 8, and 16 mm collimators for the center diode were respectively measured to 0.058 ± 0.023, 0.079 ± 0.023, and 0.097 ± 0.049 mm, and when the 4 mm collimator was applied to the center diode, the short diode, and the long diode, the average of the radial deviation was respectively 0.058 ± 0.023, 0.078 ± 0.01 and 0.070 ± 0.023 mm. The average of the radial deviations when irradiating 8 and 16 mm collimators on short and long diodes without weight are measured to 0.07 ± 0.003(8 mm sd), 0.153 ± 0.002 mm(16 mm sd) and 0.031 ± 0.014(8 mm ld), 0.175 ± 0.01 mm(16 mm ld) respectively. When various weights of 50 to 90 kg are placed on the PPS, the average of radial deviation when irradiated to the center diode for 4, 8, and 16 mm is 0.061 ± 0.041 to 0.075 ± 0.015, 0.023 ± 0.004 to 0.034 ± 0.003, and 0.158 ± 0.08 to 0.17 ± 0.043 mm, respectively. In addition, in the same situation, when the short diode for 4, 8, and 16 mm was irradiated, the averages of radial deviations were 0.063 ± 0.024 to 0.07 ± 0.017, 0.037 ± 0.006 to 0.059 ± 0.001, and 0.154 ± 0.03 to 0.165 ± 0.07 mm, respectively. In addition, when irradiated on long diode for 4, 8, and 16 mm, the averages of radial deviations were measured to be 0.102 ± 0.029 to 0.124 ± 0.036, 0.035 ± 0.004 to 0.054 ± 0.02, and 0.183 ± 0.092 to 0.202 ± 0.012 mm, respectively. It was confirmed that all the verification results performed were in accordance with the manufacturer's allowable deviation criteria. It was found that weight dependence was negligible as a result of measuring the alignment according to various weights placed on the PPS that mimics the actual treatment environment. In particular, no further adjustment or recalibration of the PPS was required during the verification. It has been confirmed that the verification test of the PPS according to various weights is suitable for normal Quality Assurance of LGK PFX.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.4
• /
• pp.87-97
• /
• 2015

There's a trend towards vitalization of nightscape planning businesses nationally and locally as well for city image making and activation of regional economy, but there is still no systematic nightscape planning going on for lack of relevant researches and objective evaluations. This study aims to suggest the guideline for nightscape planning by conducting an eye tracking experiment and survey for recognizing the characteristics of a nightscape. Furthermore, the authors intended to verify the eye-tracking method as a tool for landscape evaluation. The research site was restricted in the campus of Virginia Tech, VA, and those were selected by experts' survey among various types of nightscape images. The variables for analyzing the characteristics of nightscape images selected were 'preference', 'safety(fear)' and 'clearness'. 'Fixation duration', 'saccade duration', 'scan path length', and 'pupil size' were selected as the eye movement measurements. The results of this study are as follows: The first outcome found was that there were significant differences among the characteristics(preference, safety and clearness) of a nightscape by MANOVA, and these variables were correlated positively by Pearson's correlation. Secondly, there were differences on fixation duration, saccade duration and scan path depending on the nightscape setting statistically. Also, the eye tracking measurement in an open setting was recorded lower than enclosed settings. In the result of a heat map, we found the meaning of the fixated areas on both viewing without intention and viewing intentionally. It turned out that the fixated areas were consistent with the areas the subjects felt preferred and clarity in all of the nightscape images, which means people usually focus on what they prefer and see clearly in a certain nightscape. Based on this result and previous studies, the authors could make a conclusion that eye tracking method can apply to evaluate nightscape settings in terms of analyzing the whole characteristics and finding specific points for the detailed analysis as well. Therefore, these results can contribute by suggesting nightscape planning, implication of the landscape evaluation, and implication of the eye tracking study.

• Journal of Internet Computing and Services
• /
• v.16 no.5
• /
• pp.29-38
• /
• 2015

The Energy Storage System stores electricity for later use. This system can store electricity from legacy electric power systems or renewable energy systems into a battery device when demand is low. When there is high electricity demand, it uses the electricity previously stored and enables efficient energy usage and stable operation of the electric power system. It increases the energy usage efficiency, stabilizes the power supply system, and increases the utilization of renewable energy. The recent increase in the global interest for efficient energy consumption has increased the need for an energy storage system that can satisfy both the consumers' demand for stable power supply and the suppliers' demand for power demand normalization. In general, an energy storage system consists of a Power Conditioning System, a Battery Management System, a battery cell and peripheral devices. The specifications of the subsystems that form the energy storage system are manufacturer dependent. Since the core component interfaces are not standardized, there are difficulties in forming and operating the energy storage system. In this paper, the design of the profile structure for energy storage system and realization of private profiling system for energy storage system is presented. The profiling system accommodates diverse component settings that are manufacturer dependent and information needed for effective operation. The settings and operation information of various PCSs, BMSs, battery cells, and other peripheral device are analyzed to define profile specification and structure. A profile adapter software that can be applied to energy storage system is designed and implemented. The profiles for energy storage system generated by the profile authoring tool consist of a settings profile and operation profile. Setting profile consists of configuration information for energy device what composes energy saving system. To be more specific, setting profile has three parts of category as information for electric control module, sub system, and interface for communication between electric devices. Operation profile includes information in relation to the method in which controls Energy Storage system. The profiles are based on standard XML specification to accommodate future extensions. The profile system has been verified by applying it to an energy storage system and testing charge and discharge operations.

• Journal of Korean Home Economics Education Association
• /
• v.20 no.3
• /
• pp.85-105
• /
• 2008

The purpose of this study was to develop a narrative analytic scoring rubric through teacher-students negotiations, as an assessment of tasks using methods of experiment and practice for home economic(HE) in the middle school. In this study. an analytic rubric had been developed in the following three stages: In the first stage, all the things for rubric development were defined and prepared, by selecting tasks used for rubric application through a questionnaire survey, providing detailed directions on methods and procedures and needed items, and selecting a class for rubric negotiation and setting the development schedule. In addition, the method suggested by Ainsworth and Christinson(1998) in Student Generated Rubrics was used. In the second stage, performance criteria for tasks in terms of knowledge, skills, and attitude were developed, setting scoring framework and scales depending on assessment areas. Referring to selected scoring framework and assessment criteria, observable and assessable behaviors were used to describe rubric based on A, B, and C scale. Then, a primary rubric was developed through teacher-students negotiations, using rubrics made by group. In the last stage, the developed primary rubric was reviewed by an expert of HE education to test the validity. Moreover, the analysis to test the suitability of the final rubric assessment tool employed 46 copies of questionnaire collected from incumbent home economics teachers selected by way of random sampling mainly focusing on those teachers who were in the Master's degree program or completed the program at one university. As a result, the average of suitability of aa the rubrics were over 4.0 in th 5-point scale.

• Economic and Environmental Geology
• /
• v.23 no.2
• /
• pp.201-213
• /
• 1990

Mineralogy, chemistry, physical property, and fossil abundance have been studied for the samples collected from three weathering profiles, two from the Duho Formation and one from the Hagjeon Formation in the Tertiary sediments in the Pohang area. The mineralogy of the samples from the Duho Formation shows somewhat different from that of the Hagjeon Formation. Kaolinite is more abundant and shows higher crystallinity in samples from the Duho Formation than those in the Hagjeon Formation, but clay mineral assemblage in each weathering profile remain fairly constant with depth. This difference in mineral distribution seems to be inherited from original source materials. It indicates that little or not severe leaching has been taking place in these three weathering profiles. Weathering indicies indicate different degrees of susceptibility to chemical weathering in these two formations. The Duho Formation has a higher degree of susceptibility to weathering than that of the Hagjeon Formation which is mainly due to differences in clay mineral assemblages in both formations. A noticeble colour difference between oxidized and unoxidized zones in each profile can be easily recognized which is definetely due to different decomposition rate organic carbon by various oxidation state from surface to bottom of the profile. Weathering process have also intensively influenced microfossil preservation about up to 7-10 m in depth in the Duho Formation. Consequently, characteristics observed at weathering surface should be used as a subsidiary tool in setting geologic boundary or establishing formation. Great care must be taken to choose sampling site for microfossil study.

• Journal of Korean Academy of Nursing
• /
• v.15 no.1
• /
• pp.17-29
• /
• 1985

This study was to explore on the rank of stressful events related to the experience of hospitalization. 180 hospitalized patients on surgical and medical wards were asked to rate 49 stress-producing events associated with the experience of hospitalization. Two university hospitals was used as the setting for this study. Because the nature of the events in the stress scale pertain mainly to general short term hospitalizations, patients in the rehabilitation and psychiatric units of the hospital were not included. Prior to the beginning of the study, three times meeting were held with 12 head nurses and 3 investigators for discussing with the ethics subject related to the study. The pretest was done to determine whether items to use were pertinent or not. According to the result of the pretest, Volicer's Hospital Stress Rating Scale was selected as a study tool for this study. Data collection was used an interview and a card-sorting method. The interviewing was done by two authors and three graduate nursing students. A total 125 completed the card-sorting procedure. The stressful items were ordered from most to least stressful within the categories. Additional information such as: age, sex, marital status, and diagnosis was obtained from the kardex file. The ordered list of items, with mean values, as scored by the total of 125 respondents was significantly accepted at 1% level by Friedman test. (X²=1448.339) The event,“knowing you have a serious illness.”was rated highest stressful and (M=41.54) “Being awakened in the night by the nurse”least stressful. (M=14.73) Highly rated items were orderly “Thinking you might have cancer”“Thinking you might lose a kidney or some other organ”“Not being told what your diagnosis is. “Not knowing for sure what illness you have,”five lowerly rated items were orderly “Having to eat at different times than you usually do”“net being able to call family or friends on the phone”“Not having friends visit you,”“Having strangers sleep in the same room with you.”Futher analysis of the data was done to ascertain tao degree of similarity of judgment between different groups in the sample as to how events should be rated. The sample was divided into two groups according to the demographic characteristics and the degree of seriousness of illness. The rank order correlation was calculated for the two sets of ranks as a measure of consensus between the two groups. The correlations ranged from .85∼.99 all indicating a high degree of consensus.

• Journal of the Korean Institute of Gas
• /
• v.20 no.5
• /
• pp.9-16
• /
• 2016

Buried pipe system is subject to leak or rupture due to internal and external defects with age. Especially, if the pipeline is designed for pressurized gas, the leak can wreak a devastating on its surrounding area. The current method of setting up underground gas pipeline is based on OGP criteria of applying one tenth of the inner pipe pressure. The criteria is applied irrespective of their burial depth or pipe's properties. At times, even the whole safety measures are totally ignored. Considering the magnitude of possible damage from a gas leakage, a precise analytical tool for the risk assessment is urgently needed. The study was conducted to assess possible scenarios of gas accidents and to develop a computer model to minimize the damage. The data from ETA was analyzed intensively, and the model was developed. The model is capable of predicting jet fire influence area with comprehensive input parameters, such as burial depth. The model was calibrated and verified by the historic accident data from Edison Township, New Jersey, the United States. The statistical model was also developed to compare the results of the model in this study and the existing OGP model. They were in good agreement with respect to damage predictions, such as radiation heat coming from 10 meters away from the heat source of gas flame.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.418-428
• /
• 2016

The participants in an urban and housing redevelopment project were categorized as construction companies, government employees, and housing cooperatives. This study analyzed how a public management system affects the continuous participation intention using comprehensive project satisfaction. The specific factors for the evaluation items of a public management system were composed using advanced research. A hypothesis and research model was set up and verified using the PLS-SEM model to analyse how the continuous participation intention is affected by the public management system via comprehensive projects satisfaction. Setting the project plan and selecting the project tool, as well as post management and sustainability affect the comprehensive projects satisfaction meaningfully in the case of construction companies. The participation of the user, and post management and sustainability affect the comprehensive project satisfaction meaningfully in the case of government employees. The operating organization and using and participation of the user affect the comprehensive project satisfaction meaningfully in the case of a housing cooperative. The comprehensive project satisfaction affects the continuity of the participation meaningfully in the case of all of project participants.

• Journal of The Korean Association For Science Education
• /
• v.33 no.1
• /
• pp.1-16
• /
• 2013

In this research, we tried to discover the characteristics of gifted students by analyzing their experience in showing task commitment. In order to do this, we asked science gifted students to specifically describe their experiences while deeply experimenting on a scientific cause or theory. From their responses, we inductively explored the characteristics of science gifted students by extracting and analyzing the characteristics that show task commitment. Consequentially, the characteristics of the gifted students are divided into nine categories, which are confidence, setting a challenging goal, challenging approach for solving problems, sense of potential control, loss of self-consciousness, time distortion, submission to difficult task, initiative, and endurance, all of which appear repeatedly among the gifted students. With consensus among three experts who have experience in research on gifted education, these nine characteristics can be categorized into 3 characteristics; challenge, flow, and willingness. The three characteristics such as challenge, flow, and willingness well represent a definition of task commitment. These characteristics can explain the level of task commitment exhibited by science gifted students. It is possible to develop the tool and framework for judging the task commitment of gifted students on the basis of their characteristics.

• Journal of Environmental Policy
• /
• v.12 no.1
• /
• pp.37-58
• /
• 2013

In recently, the low impact development(LID) is discussed at various fields being related to urban stormwater, non-point source pollution, and quality of life. It is understood as an integrated development tool to induce sustainable development with various value-social, economic, and aesthetic. As concerning the development of waterfront area, the low impact development is interested in environmental planning. But the planning process and factors are not considered in precedent research. This study has two purposes. The one is to understand the planning process and factors of low impact development from literature review. The other is to apply the planning factors using case study and to know the effect of low impact development as the simulation plan. The simulation plan is based on some landuse planning. It is divided into the setting the region for environmental protection and the function of public facilities, spatial planning for enlarging permeable area, and spatial planning for circulation of water. The simulation model uses the LIDMOD2. The 14 planning factors of low impact development is applied to case region. And the effect is about 7~10 percent in reduction of nonpoint source pollution and surface runoff.