• Journal of radiological science and technology
• /
• v.42 no.6
• /
• pp.469-476
• /
• 2019

The purpose of this study examines the education, knowledge and behavior of radiation safety management among dental workers and compares the education, knowledge and behavior between dental hygienist group and other occupational groups. This study was conducted from November 2nd to November14th, 2019. The survey was conducted on dental workers(dental hygienists, nursing, assistants, coordinators, etc.) who worked in dental hospitals and clinics in Busan area. The tool of this study was modified and adapted to the clinical setting based on the questionnaire. Radiation safety education has 39 dental hygienists who had more education than non-dental hygienists (p=0.286). The most common types of radiation safety education were self-education which usually performed by dentistry, followed by conservative education and others. The average of radiation attitudes, knowledge and behaviors was higher in the dental hygienist group then in the non-dental hygienist group. On the item-specific behavior among employees, the question of 'the radiation should be shielded according to the menstrual cycle or pregnancy of the woman of childbearing' was significant (p<0.05). On the item-specific knowledge between occupations, the question of 'the intensity of X-rays decreases over distance' and 'the individual exposure can be measured by TLD badge or film badge' was significant (p<0.05). Taken together, these results indicate that the dental hygienist group is more concerned about radiation safety and that the dental hygienist group is receiving more radiation safety management training. However, if there is a low level of 'has experienced' in the presence or absence of safety management education, it is difficult to train radiation safety management in dentistry. Therefore, it is considered that dentists should be trained in radiation safety management periodically to pay attention to radiation safety accidents.

• Korean Security Journal
• /
• no.20
• /
• pp.271-289
• /
• 2009

In e-terrorism, terrorists use cyber spaces including the internet in order to strike terror into the heart of a nation. It is revealed that recently happening terror cases use cyber spaces as a strategic tool. This research aims to investigate efficient countermeasures against various types of terror attacks made by terrorists and their cyber networking, in order to contribute to the prevention of terrors from a modern standpoint. Based on the results of the investigation, relevant problems are suggested such that terrors are not cases happening in a specific country only because they take place in cyber spaces, that hacking incidents frequently happen in Korea which is used as a footstool by foreign hackers, and that Korea has poor professional security manpower and foundational facilities in comparison with other advanced countries. Answers to the problems include cultivating cyber information manpower to cope with e-terrorism, making an appropriate budget, setting up networks to integrate and systematize anti-e-terrorism organizations, and intensifying the collection of information of cyber attacks and the analysis of the information.

• Journal of Veterinary Clinics
• /
• v.30 no.4
• /
• pp.268-272
• /
• 2013

The purpose of this study was to assess the effects of reconstruction kernel, and slice thickness on the accuracy of spiral CT-based volume assessment over a range of object sizes typical of synthetic simulated tumor. Spiral CT scanning was performed at various reconstruction kernels (soft tissue, standard, bone), and slice thickness (1, 2, 3 mm) using a phantom made of gelatin and 10 synthetic simulated tumors of different sizes (diameter 3.0-12.0 mm). Three-dimensional volume assessments were obtained using an automated software tool. Results were compared with the reference volume by calculating the percentage error. Statistical analysis was performed using ANOVA and setting statistical significance at P < 0.05. In general, smaller slice thickness and larger sphere diameters produced more accurate volume assessment than larger slice thickness and smaller sphere diameter. The measured volumes were larger than the actual volumes by a common factor depending on slice thickness; in 100HU simulated tumors that had statistically significant, 1 mm slice thickness produced on average 27.41%, 2 mm slice thickness produced 45.61%, 3 mm slice thickness produced 93.36% overestimates of volume. However, there was no statistically significant difference in volume error for spiral CT scans taken with techniques where only reconstruction kernel was changed. These results supported that synthetic simulated tumor size, slice thickness were significant parameters in determining volume measurement errors. For an accurate volumetric measurement of an object, it is critical to select an appropriate slice thickness and to consider the size of an object.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.3
• /
• pp.74-82
• /
• 2015

A method to filter out the effect of river stage fluctuations on groundwater level was designed using an artificial neural network-based time series model of groundwater level prediction. The designed method was applied to daily groundwater level data near the Gangjeong-Koryeong Barrage in the Nakdong river. Direct prediction time series models were successfully developed for both cases of before and after the barrage construction using past measurement data of rainfall, river stage, and groundwater level as inputs. The correlation coefficient values between observed and predicted data were over 0.97. Using the time series models the effect of river stage on groundwater level data was filtered out by setting a constant value for river stage inputs. The filtered data were applied to the hybrid water table fluctuation method in order to estimate the groundwater recharge. The calculated ratios of groundwater recharge to precipitation before and after the barrage construction were 11.0% and 4.3%, respectively. It is expected that the proposed method can be a useful tool for groundwater level prediction and recharge estimation in the riverside area.

• Journal of Engineering Education Research
• /
• v.12 no.2
• /
• pp.63-70
• /
• 2009

In this paper, a process model for assessing, evaluating and improving a program outcome on the cultivation of internationality is proposed by analyzing the present outcome assessment system. By setting up performance scaled levels and specifying the target level for the performance criterion, the proposed model can help programs to demonstrate effectively that each of their graduates meets the required the program outcome levels. By allowing effective Continuous Quality Improvement(CQI) for the performance criterion, the model can help save operational expense associated with running of the program CQI. In addition, it is discussed that one of the most important aspect is logical and objective approaches when establishing the outcome assessment system. It is hoped that the proposed model can ultimately help to meet the program outcomes requirements in the engineering accreditation criteria.

• The Mathematical Education
• /
• v.45 no.2 s.113
• /
• pp.191-204
• /
• 2006

Computer technology has a potential to change the contents of school mathematics and the way of teaching mathematics. But in our country, the problem whether computer technology should be introduced into mathematics classroom or not was not resolved yet. As a tool, computer technology can be used by teachers who are confident of the effectiveness and who can use it skillfully and can help students to understand mathematics. The purpose of this study was to investigate the effective way to introduce and utilize computer technology based on the status quo of mathematics classroom setting. One possible way to utilize computer technology in mathematics classroom in spite of the lack of computer and the inaccessibility of useful software is using domain specific simulation software like 'Polyhedron'. 'Polyhedron', as we can guess from the name, can be used to explore regular and semi regular polyhedra and the relationship between them. Its functions are limited but it can visualize regular polyhedra, transform regular polyhedra into other polyhedra. So it is easier to operate than other dynamic geometry software like GSP. To investigate the effect of using this software in mathematics class, three classes(one in 6th grade from science education institute for the gifted, two in 7th grade) were chosen. Activities focused on the relationship between regular and semi regular polyhedra. After the class, several conclusions were drawn from the observation. First, 'Polyhedron' can be used effectively to explore the relationship between regular and semi regular polyhedra. Second, 'Polyhedron' can motivate students. Third, Students can understand the duality of polyhedra. Fourth, Students can visualize various polyhedra by reasoning. To help teachers in using technology, web sites like NCTM's illuminations and NLVM of Utah university need to be developed.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.6
• /
• pp.31-40
• /
• 2012

Ubiquitous technology influences on various firms of contents needed for self-healthcare, as it fuses into medical services. Particularly, rapid changes in the web and mobile environment, requiring various sorts of healthcare and its related contents, make efficiency of search more important. Personalized contents needs to be more refined as well as the existing simple keyword-centered searching method needs to be more effective in order to meet both requirements and characteristics of each patient or each user. A precise semantic searching method is required for a system to understand promptly the meaning of a contents. In this respect, to build a healthcare ontology has its own significance. This study builds up a system model that can be utilized practically in existing systems by setting up the Food Class and its sub-class among the healthcare contents with Protege tool and then materializing constraints and its relationships between each class. The healthcare contents ontology provides patients or users with a platform which can search the needed information promptly and precisely.

• Korean Parent-Child Health Journal
• /
• v.11 no.1
• /
• pp.61-72
• /
• 2008

This study is a descriptive research attempted to examine the exercise practice of junior high school students and figure out their changing process, decision-making balance, and self-efficacy according to the exercise practice so that they can be utilized as fundamental data for developing exercise intervention programs for junior high school students. The study subjects were students from five junior high schools in B City. Total 600 questionnaires were distributed, and 554 responded ones were analyzed. The collected data were analyzed using SPSS/Win 10.0. According to the results of analyzing the subjects with the exercise changing stage tool, exercise non-practice group including the precontemplation stage, contemplation stage, and preparation stage occupies 57.6% while the exercise practice group including the action stage and maintenance stage consists of 42.4%. And according to the results of discriminating analysis setting total 10 factors of transtheoretical model variables as predictive factors to predict each group based on whether they practice exercise or not, it was found out that the subordinate factors of the changing process, consciousness-raising (F=33.98, p=.000), self-cognitive decision (F=21.55, p=.000), contrary condition provision (F=84.67, p=.000), helping relationship (F=28.52, p=.000), reinforced thinking (F=14.15, p=.000), and stimulus control (F=54.64, p=.000), and the subordinate factors of the decision-making balance, beneficial factors (F=15.65, p= .000) and hindering factors (F=8.58, p=.004), and self-efficacy (F=78.60. p=.000) were significant predictive factors and discriminating variables. Based on the research findings above, it will be necessary to develop exercise intervention programs sufficiently reflecting the changing process, decision-making balance, and self-efficacy suitably for the subjects and make strategies to encourage their active participation and exercise maintenance, through verifying transtheoretical model variables according to whether the junior high school students practice exercise or not.

• Atmosphere
• /
• v.22 no.4
• /
• pp.415-427
• /
• 2012

$CO_2$ is the most important trace gas related to climate change. Therefore, understanding surface carbon sources and sinks is important when seeking to estimate the impact of $CO_2$ on the environment and climate. CarbonTracker, developed by NOAA, is an inverse modeling system that estimates surface carbon fluxes using an ensemble Kalman filter with atmospheric $CO_2$ measurements as a constraint. In this study, to investigate the capability of CarbonTracker as an analysis tool for estimating surface carbon fluxes in Asia, an experiment with a nesting domain centered in Asia is performed. In general, the results show that setting a nesting domain centered in Asia region enables detailed estimations of surface carbon fluxes in Asia. From a rank histogram, the prior ensemble spread verified at observational sites located in Asia is well represented with a relatively flat rank histogram. The posterior flux in the Eurasian Boreal and Eurasian Temperate regions is well analyzed with proper seasonal cycles and amplitudes. On the other hand, in tropical regions of Asia, the posterior flux does not differ greatly from the prior flux due to fewer $CO_2$ observations. The root mean square error of the model $CO_2$ calculated by the posterior flux is less than the model $CO_2$ calculated by the prior flux, implying that CarbonTracker based on the ensemble Kalman filter works appropriately for the Asia region.

• Journal of Information Processing Systems
• /
• v.15 no.6
• /
• pp.1277-1295
• /
• 2019

With its technical development, digital printing is being universally introduced to the mass production of clothing factories. At the same time, many fashion platforms have been made for customers' participation using digital printing, and a tool is provided in platforms for customers to make designs. However, there is no sufficient solution in the production stage for automatically converting a customer's design into a file before printing other than designating a square area for the pattern designed by the customer. That is, if 30 different designs come in from customers for one shirt, designers have to do the work of reproducing the design on the clothing pattern in the same location and in the same angle, and this work requires a great deal of manpower. Therefore, it is necessary to develop a technology which can let the customer make the design and, at the same time, reflect it in the clothing pattern. This is defined in relation to the existing clothing pattern with digital printing. This study yields a clothing pattern for digital printing which reflects a customer's design in real time by matching the diagram area where a customer designs on a given clothing model and the area where a standard pattern reflects the customer's actual design information. Designers can substitute the complex mapping operation of programmers with a simple area-matching operation. As there is no limit to clothing designs, the variousfashion design creations of designers and the diverse customizing demands of customers can be satisfied at low cost with high efficiency. This is not restricted to T-shirts or eco-bags but can be applied to all woven wear, including men's, women's, and children's clothing, except knitwear.