• 대한치과의사협회지
• /
• 제36권2호통권345호
• /
• pp.135-143
• /
• 1998

Cephalogram is one of the most important tool in researching growth and development of craniofacial area, orthodontic diagnosis and treatment planning. But its inherent distortion of actual length and angles during projecting three dimensional object to two dimensional plane might cause errors in quantitative analysis of shape and size. three dimensional high quality images can be obtained using computerized tomogram and have reported in literatures. Considering its expenses and amount of exposure to radiation, limitations still remain to be solved in its application to routine practice. construction of three dimensional image using principle of orientator can be obtained by biplanar stereoradiography. Theoretically two images, lateral and P-A can be used to construct three dimensional image provided that those are taken at same time by two different focal spots. As two images(lateral and P-A) obtained by conventional cephalogram have different head posture, those need compensation to construct three dimensional images. This study introduced principle of computerized head posture compensation and showed that conventional cephalogram could be used to construct three dimensional image and could be applied to routine orthodontic practice.

• 한국안전학회지
• /
• 제14권4호
• /
• pp.192-198
• /
• 1999

Work-related musculoskeletal disorders constitute a major source of employee disability and lost wages. Cumulative Trauma Disorders(CTD) refers to a category of physical conditions which result from chronic musculoskeletal injury. Assessment of CTD risk in industry at early stage allows for early control, a safe environment, and a healthier workforce. In this study, the physical load of the shipping work in the cold storage warehouse were especially investigated. Employees were working with almost unnatural posture in a very restricted work space. The questionnaire and biomechanical analysis were used to evaluate the physical load. Results from analyses showed that they were sufficiently exposed to CTD due to repetition and unnatural posture. Based on the analysis, ways for improving working conditions are proposed. The analysis and proposals in this paper will serve as a basic tool for designing/redesigning working environment such as improvement of tools and equipments, design of times for work/rest cycle.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.234-239
• /
• 2003

A cylindrical shape object is widely used as a mechanical part and a water pipe or an oil pipeline which are of cylindrical shape are widely used in the infrastructure. In order to handling such objects automatically using a robot, the posture i.e. orientation in 3D space should be recognized. However, since there is no edge or vertex in the pipe, it is very difficult task for the robot. In this paper in order to guide the robot, two kind of algorithms which find the axis using the measured range data from the robot to the object surface are to be developed. The algorithms are verified using both the simulated range data and the measured one.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.151-157
• /
• 1996

Postural tremor of the upper arm in a static posture was measured to provide guidelines of hand tool weight. Three types of camera recording postures were selected. Postural tremor was measured on five levels of tool weights; no weight, 400g, 800, 1200g, and 1600g. For each conditions, upper arm postural tremor was measured together with EMG of biceps, deltoid, and pectoralis major, and Borg's CR-20 scale ratings of perceived exertion. Results of the experiment are as follows; Frequency analysis of tremor revealed that increased amplitude of frequency band of 2-4Hz and 10-14Hz was observed. Postural tremor of the upper arm maintained the initial level until fatigue developed. After the development of fatigue, the rate of the change of postural tremor was significantly increased. Different tool weights and hand postures showed different rate of tremor increase. And time to fatigue and the corresponding endurance time was positively correlated with Borg's RPF scores.

• 대한인간공학회지
• /
• 제31권3호
• /
• pp.469-474
• /
• 2012

The aim of this study is to develop an ergonomic design of magic saw handle considering user experiences. Background: Frequent use of hand tool can cause musculoskeletal disorders by inadequate wrist posture, excessive strength, repetitiveness, friction and pressure, vibration, etc. A hand tool that is inappropriately designed has higher risk causing musculoskeletal disorders. Complaints for the design of magic saw handle has been raised by many users according to the increasing use of magic saw. Method: Hand tool has to be designed considering worker's characteristics and task condition to prevent worker's musculoskeletal disorders. For this, user experiences for magic saw handle were measured through questionnaire survey and observation. Results: An ergonomic design of magic saw handle considering user experiences was proposed and then its design suitability was evaluated in comparison with the existing handle design using EMG and subjective evaluation. Conclusion: The proposed handle design showed higher satisfaction and lower muscular fatigue. Application: The results of this study can be effectively used to develop a new magic saw.

• 대한안전경영과학회지
• /
• 제8권4호
• /
• pp.13-23
• /
• 2006

Grip strength provides a quick and objective index of the functional integrity of the upper extremities. It is widely used as an assessment measure in physical and rehabilitation medicine. In this study, maximum voluntary grip strength of 20 college students wearing 5 different gloves were measured using Jamar hand dynamometer. The results show that maximum voluntary grip strength was generally reduced when wearing gloves as compared to bare-handed. More specifically, the grip strength was highest when wearing PVC coated glove or bare-handed and getting lowered as wrist band, rubber, leather, and cotton glove in these order. Depending on the measuring posture of grip strength, shoulder height with arm extended forward was higher than the elbow was flexed 90 degree. Moreover, subjects' demographic factors and hand dimensions were not closely related to the grip strength. It is thus recommended that the proper glove should be provided to reduce the negative consequences including dropping a tool, poorer control of a tool. lower quality work, and increased muscle fatigue and in turn to increase the user safety and satisfaction.

• 대한물리의학회지
• /
• 제11권3호
• /
• pp.65-72
• /
• 2016

PURPOSE: The purpose of this study is to determine the differences between the muscle activity of cranio-cervical flexion and extension muscles according to the types of tools used through a short-term intervention of cranio-cervical static stabilization exercises using small tools. METHODS: A total of fifteen male and female adults in their 20s who showed forward head posture in the overall body posture measurement system participated in this study. Each subject performed cranio-cervical static stabilization exercises about flexion and extension while using a sling, a foam roller, a TOGU ball, and without tools separately, and the muscle activity of the sternocleidomastoid muscle, scalenus anterior and splenius capitis was measured. Each value was measured for 10 seconds a total of three times. The maximum voluntary isometric contraction value was computed using the average during the middle four seconds. RESULTS: Cranio-cervical flexion exercises using various tool types, the average activity of the sternocleidomastoid and scalenus anterior muscles was significantly higher when applying the TOGU ball (p<.05). According to the results of implementing cranio-cervical flexion exercise using various tools, the maximum muscle activity of the sternocleidomastoid muscle was significantly higher for the TOGU ball (p<.05). CONCLUSION: Based on these results, the provision of an unstable surface using small tools rather than a stable surface is recommended as an exercise scheme for proprioceptive stimulation in a forward head posture. Particularly, we recommend using the TOGU ball for the provision of an unstable surface to increase the muscle activity of the sternocleidomastoid muscle and scalenus anterior.

• 한국전문물리치료학회지
• /
• 제23권3호
• /
• pp.48-56
• /
• 2016

Background: Recently, there has been an emphasis on the use of interventions with biofeedback information for the maintenance or correction of posture. Objects: This study assessed the change of trunk posture and trunk muscle activation when people exhibiting postural kyphosis performed visual display terminal work with or without a contact feedback device (CFD). Methods: Eighteen right-handed individuals were recruited. Thoracic angle and right thoracic erector spinae (TES) muscle amplitude were analyzed. There were two sessions in these experiments. The control session involved 16 minutes of typing without a CFD, and the CFD session involved 16 minutes of typing with a CFD. The visual analog scale score was analyzed with a paired t-test, and the kinematic and electromyography data were analyzed through two-way repeated analysis of variance. Results: The paired t-tests revealed that subjects had significantly less pain after the CFD sessions than after the control sessions (p<.05). Significant main effects by session and by time were observed in the thoracic kyphosis angle (p<.05). There was a significant session${\times}$time interaction for TES amplitude (p<.05), along with significant main effects by session and by time (p<.05). Conclusion: The CFD caused people with postural kyphosis to straighten and to activate their TES continuously, even though they were habituated to bend their bodies forward. Therefore, the CFD was a beneficial treatment tool.

• 대한인간공학회지
• /
• 제30권3호
• /
• pp.419-426
• /
• 2011

Objective: The objective of this study was to evaluate a work of guards, using an ergonomic method(work analysis and posture analysis). Background: Most studies about guards were conducted in the field of medical, problems of shift, and the physical problems of old workers and social problems. But, guards consist of vulnerability group so it needs an ergonomic research in musculoskeletal disorders. Method: A head of an ergonomic estimation was work analysis(determination of combined task, work tool, work time and frequency of combined task) and posture analysis(upper body and lower body) of workers based on the video. Results: The result showed that combined task of guards was classification of patrolling, security, cleaning and waiting. The security indicated the highest ratio in the work time of combined tasks. The results of posture analysis for guards indicated high value in neutral. But, lower arm indicated high value in bending(left: 59%, right: 50%). Conclusion: The results of ergonomic methods indicated that guards' physical work load was not high during work, but comfortable work environment would be required for old guards. Application: If an ergonomic rule can be integrated into existing work environments, the risk of occupational injuries and stress will be reduced.

• 대한디지털의료영상학회논문지
• /
• 제13권4호
• /
• pp.177-183
• /
• 2011

This study intends to investigate patients' exact exposure doses by comparatively measuring ESD (Entrance Surface Dose) with the DAP meter, which excludes scattered rays, and ESD with the Xi multifunction meter, which includes scattered rays, by posture changes for Esophagography test and UGI test. The materialwere examined through Sonialvision-SafireII SPEC overtube system. ESD was measured by using the DAP meter, and as a tool to measure ESD including scattered rays on the plane of incidence of human phantom, the Xi multifunction meter was used. The average fluoroscopic time of Esophagography test was 4.192 minutes and the average number of images was 47.7, while the average fluoroscopic time of UGI test was 6.881 minutes and the average number of images was 37.8. The ratios of the incident dose of DAP meter and the ESD of Xi meter were calculated bydividing the fluoroscopic time and the number of images by each posture change. As for Esophagography test, the dose increased by 21.6~55.5% in the fluoroscopic test and by 4.8~24.7% in the spot test. In the front spot test, however, the does increased by as little as 5.3%. As for UGI test, the dose increased by 21.1~49.5% in the fluoroscopic test and by 10.1~34.9% in the spot test. It is expected that measuring doses in consideration of scattered rays by posture changes will be an important index in evaluating and managing patients' exact exposure doses for each test above. Furthermore, it is judged that this sort of study is inevitable and desirable to reduce patients' exposure doses after all.