• Title/Summary/Keyword: Tool Measuring System

검색결과 390건 처리시간 0.024초

도시환경변수를 이용한 격자 인구추정에 있어서의 유전적 알고리즘기법 활용 연구 (An Application of the Genetic Algorithm on Population Estimation Using Urban Environmental Factors)

  • 최내영
    • 한국지리정보학회지
    • /
    • 제13권3호
    • /
    • pp.119-130
    • /
    • 2010
  • 본 논문에서 활용한 유전적 알고리즘(GA)은 격자형 인구분포자료를 기반으로 인구추정 모형을 구축하는 데 적용되고 있는 일종의 인구표면모형 중 하나이다. 본 연구는 신도시 개발 등이 활발히 진행되고 있는 화성시 동부권을 대상지로 하여 격자형 인구분포자료를 구축하고 도시환경변수를 이용해 GA 인구설명 모형을 추정하였다. 분석결과 기반시설, 지역공공서비스시설 등은 이미 동부권내에 공간적으로 균등 분포하는 관계로 설명력이 없는 것으로 나타난 반면 표고, 경사 등의 자연환경변수와 개발촉진 및 규제 관련 용도지역지구 등의 변수에 대해서는 매우 설득력 있는 계수 값들이 도출되었다. 결과적으로 본 연구에서 활용한 GA모형은 적자생존의 유전학적 원리를 기반으로한 매우 직관적이고 학제적인 적정해 탐색 기법 중 하나임을 확인할 수 있었다.

LIDAR를 활용한 지하광산의 안정성 분석에 관한 연구 (A Study on the Stability Analysis of Underground Mine using LIDAR)

  • 이승중;김병렬;진연호;최성웅
    • 터널과지하공간
    • /
    • 제27권6호
    • /
    • pp.406-421
    • /
    • 2017
  • 본 연구에서는 LIDAR를 이용하여 채굴적의 형상을 수치적으로 정확히 측량하고 이때 획득된 점군 데이터를 3차원 전산해석에 직접 반영함으로써 구조물의 실제 형상을 전산해석에 그대로 반영하는 과정을 모사하고 있다. 해석 대상은 채수율 향상을 목적으로 개발된 주방식 하이브리드 채광법이 적용되고 있는 지하 석회석광산의 일부 구역이다. 연구대상 구역에 대한 LIDAR 측정을 통해, 상하부 수직 안전광주의 중심축은 NW 방향으로 치우쳐 있고 특히 하부 수직 안전광주의 경우 설계단면인 $100m^2$ 보다 약 $34m^2$ 만큼 작은 것으로 확인되었다. 또한 LIDAR 측량 결과를 바탕으로 전산해석을 실시한 결과, 하부 수직보안광주의 하단부에 응력집중이 발생하면서 수직 안전광주 전체에 전단파괴양상이 나타나는 것으로 확인되어 보강작업이 제안된 바 있다. 따라서 LIDAR에 의한 채굴적의 측정은 안전광주의 기하학적 구조 및 현상을 정량적으로 정확히 분석할 수 있으며 이를 통한 채굴적의 안정성 분석은 보다 높은 신뢰도를 제시할 수 있다는 점에서 매우 효과적인 채굴적 형상 계측 기법의 하나로 제안될 수 있을 것이다.

아동간호학 임상실습교육 현황 (An Analysis on Clinical Education of Pediatric Nursing)

  • 권인수
    • Child Health Nursing Research
    • /
    • 제8권3호
    • /
    • pp.344-356
    • /
    • 2002
  • This study was conducted to analyse the current clinical education of pediatric nursing in baccalaurate nursing program, then to give basic data for enhancing the quality of future clinical education of pediatric nursing. Data were collected through self-reported questionnaire by mail from December 2001 to February 2002. The subjects were 29 schools of 50 baccalaurate nursing education programs. The data were analysed by double raters, researcher and assistant researcher. The results were summarized as follows: 1. Twenty-eight schools had the objectives of the clinical education of pediatric nursing, and 28 schools in pediatric ward, 23 schools in nursery, 22 schools in neonatal intensive care unit(NICU), 15 schools in objectives related to profession by clinical site. 2. Credits on clinical education of pediatric nursing were most 15 schools of 3 credits. 3. The clinical sites were mainly the hospital that sick children were admitted in. 4. The clinical teacher were 9 types including pediatric professor and field nurse. 5. On teacher's role, the professor instructed the case study and conference, and field nurse instructed the patient assignment and nursing procedures. 6. All of schools used explanation and conference as a method of clinical education, 1 or 2 schools used PBL or role play or field study. 7. On clinical education content, most of school included Apgar scoring system, physical examination in newborn assessment, respira- tion maintenance, temperature maintenance, infection prevention, nutrition, and bath in newborn care. 8. On clinical education content, most of school included care of incubator, phototheraty, infusion, gavage feeding and how to use the instruments in NICU. Eighteen schools included attachment promotion, and 20 schools case study. 9. On clinical education content, most of school included a checklist of nursing procedures, case study, assessment of growth and development in pediatric ward and other sites. 10.There were various evaluation types in scores, measuring items. In conclusion, the results of this study revealed that there were some discrepancy in the objectives and contents, clinical sites on hospital focused, teacher's role, and diversity of measurement items and ratings in clinical education of pediatric nursing. There is a need for a standardization of content, clinical site, and evaluation tool to improve a quality of clinical education of pediatric nursing based on this study.

  • PDF

중환자 통증사정 도구의 타당성 평가 (Validation of Critical Care Non-verbal Pain Scale for Critically Ill Patients)

  • 최은희;김진희;고미숙;김지양;권은옥;장인순
    • 임상간호연구
    • /
    • 제19권2호
    • /
    • pp.245-254
    • /
    • 2013
  • Purpose: This study was done to examine predictive validity of Critical Care Non-verbal Pain Scale (CNPS) and develop criteria for pain assessment using CNPS with critically ill patients who have communication problems. Methods: Data were collected from intensive care units at three major general hospitals in Seoul and Kyunggi province. During each observation, a nurse assessed pain severity using CNPS ratings (range 0-9) at four treatment stages: at rest, during central catheter dressing change (nonpainful procedure), position change and suctioning (routine painful procedures). Patients also assessed their pain using a self-report 4-point VRS-4. Results: There were significant differences between the four treatment stages except between "at rest" and "nonpainful procedure". Strong correlations were found between CNPS and VRS-4 for "at rest" (r=.552, p<.001), central catheter dressing change (r=.505, p<.001), position change (r=.709, p<.001), and suctioning (r=.662, p<.001). ROC curve analysis of CNPS based on 3 point on VRS-4 showed the cutoff point was 3 for CNPS, the starting point for pain management with 73% sensitivity, 92.2% specificity, 73% positive predictive value, and 92.8% negative predictive value. Conclusion: Results indicate that CNPS is a valid tool for measuring pain in critically ill patients with communication problems and 3 point should be the standardized pain treatment point.

안와파열골절 급성기의 CT영상을 이용한 계측학적인 연구 (Measurement Analytical Study of Computed Tomography of the Orbital Structure in Acute Blow-out Fracture)

  • 정성호;신승한;박승하;구상환
    • Archives of Plastic Surgery
    • /
    • 제34권1호
    • /
    • pp.44-51
    • /
    • 2007
  • Purpose: Blow-out fracture is one of the most common fractures in facial trauma. It is diagnosed by Computed Tomography(CT) scan, which is considered as the most effective diagnostic tool. Since, the Picture Archiving Communication System(PACS) has been provided recently to many hospitals, doctors are more familiar with imaging software of PACS. Because this software has many useful measuring tools, doctors can measure orbital structure easily and make a plan for treatment with its data. Therefore, authors intended to analyze the data of orbital structure measured with PACS imaging software and evaluate its usefulness. Methods: The charts and CT images of 100 patients, which were 50 patients with medial wall fracture and 50 patients with floor fracture, were reviewed. Patients were selected by pre-determined criteria and their CT images were measured with image software of PACS. 'Extraocular muscle thickness', 'Defect ratio'(ratio of defect area to normal area) and 'Globe position index' were measured and analyzed statistically. Results: The thickness of inferior rectus muscle and medial rectus muscle was simultaneously increased in acute-stage of blow-out fracture. The medial rectus muscle was more thickened in medial wall fracture and inferior rectus was more thickened in floor fracture, respectively. In acute blow-out fracture, globe position is exophthalmic rather than enophthalmic. Especially in floor fracture, numerical value summed up thickness of all extraocular muscle is correlated to the defect ratio and globe position index. Conclusion: Clinicians can decide globe position or presume defect ratio in inferior wall fracture by measurement of CT image in acute blow-out fracture using PACS.

손가락 경직을 모사하는 로봇 시뮬레이터를 이용한 경직도 검진의 신뢰도 평가 (Reliability of Modified Ashworth Scale Using a Haptic Robot Finger Simulating Finger Spasticity)

  • 하도경;박형순
    • 대한기계학회논문집B
    • /
    • 제41권2호
    • /
    • pp.125-133
    • /
    • 2017
  • 본 연구에서는 환자의 손가락 경직을 모사하는 손가락 시뮬레이터를 통해 손가락 경직도 검진에서의 검진자간 신뢰도에 대해 연구하였다. 시뮬레이터를 제어하기 위해 경직에서 나타나는 토크를 간단하게 모델링 하고 손가락 경직 환자로부터 간단한 측정 모듈을 이용해 각각의 Modified Ashworth Scale(MAS) 등급에 맞는 파라미터를 얻어냈다. 또한 중수지 관절에 모터가 위치한 손가락 형태의 로봇을 설계하여 경직 토크 모델을 따르는 시뮬레이터를 개발하였다. 이 시뮬레이터를 통해 일곱 명의 재활의학과 전문의들의 검진 결과를 평가해본 결과 중수지 관절에서 0.619, 근위지간 관절에서 0.514의 Cohen's Kappa 값을 보였다. 검진자간의 Fleiss' Kappa 값은 중수지 관절에서 0.513, 근위지간 관절에서 0.486으로 나타났다. 또한 검진자들은 각각의 주관적인 MAS 검진 기준을 가진다는 것을 확인하였다. 결과적으로 같은 환자에 대한 MAS 검진 신뢰도가 높지 않기 때문에 개발된 로봇 시뮬레이터는 검진자의 신뢰도를 높일 수 있는 교육용 도구로서 활용 가능함을 확인하였다.

축소형 항공기 모델의 레이다 단면적 분석 및 측정에 대한 연구 (A Study on the Measurement and the Analysis of Radar Cross Section of the Scaled Aircraft Model)

  • 김기중
    • 한국전자통신학회논문지
    • /
    • 제15권6호
    • /
    • pp.1055-1060
    • /
    • 2020
  • 본 연구는 축소형 항공기의 레이다 단면적 분석 및 측정에 대한 연구이다. 사전에 축소형 항공기에 대한 레이다 단면적 특성을 전자기 해석 툴을 사용하여 분석하고 실제 축소형 항공기를 제작하여 무반사실에서 측정하였다. 측정 시 구모델을 사용하여 RCS 특성의 기준 데이터로 적용하여 실제 축소형 모델의 시험 결과 데이터에 적용하였다. 측정 방법은 시간 게이팅을 적용하여 무반사실 내부에서 산란되는 성분에 대한 영향을 제거하여 측정의 정확성을 향상시켰다. 축소형 모델의 RCS 시험 결과는 사전 해석 결과와 같이 초단파 대역에서 상대적으로 RCS 특성이 높게 측정되었다. 향후 본 연구를 통하여 파장이 상대적으로 큰 VHF/UHF 대역 레이다의 표적에 대한 RCS 분석 및 측정에 대한 특성 기술에 활용할 예정이다.

A qPCR Method to Assay Endonuclease Activity of Cas9-sgRNA Ribonucleoprotein Complexes

  • Minh Tri Nguyen;Seul-Ah Kim;Ya-Yun Cheng;Sung Hoon Hong;Yong-Su Jin;Nam Soo Han
    • Journal of Microbiology and Biotechnology
    • /
    • 제33권9호
    • /
    • pp.1228-1237
    • /
    • 2023
  • The CRISPR-Cas system has emerged as the most efficient genome editing technique for a wide range of cells. Delivery of the Cas9-sgRNA ribonucleoprotein complex (Cas9 RNP) has gained popularity. The objective of this study was to develop a quantitative polymerase chain reaction (qPCR)-based assay to quantify the double-strand break reaction mediated by Cas9 RNP. To accomplish this, the dextransucrase gene (dsr) from Leuconostoc citreum was selected as the target DNA. The Cas9 protein was produced using recombinant Escherichia coli BL21, and two sgRNAs were synthesized through in vitro transcription to facilitate binding with the dsr gene. Under optimized in vitro conditions, the 2.6 kb dsr DNA was specifically cleaved into 1.1 and 1.5 kb fragments by both Cas9-sgRNA365 and Cas9-sgRNA433. By monitoring changes in dsr concentration using qPCR, the endonuclease activities of the two Cas9 RNPs were measured, and their efficiencies were compared. Specifically, the specific activities of dsr365RNP and dsr433RNP were 28.74 and 34.48 (unit/㎍ RNP), respectively. The versatility of this method was also verified using different target genes, uracil phosphoribosyl transferase (upp) gene, of Bifidobacterium bifidum and specific sgRNAs. The assay method was also utilized to determine the impact of high electrical field on Cas9 RNP activity during an efficient electroporation process. Overall, the results demonstrated that the qPCR-based method is an effective tool for measuring the endonuclease activity of Cas9 RNP.

아바타를 활용한 브랜드 개성의 시각화에 관한 연구 (A Study on the Visualization of Brand Personality by Utilizing the Avatar)

  • 송민정;정경원
    • 디자인학연구
    • /
    • 제19권1호
    • /
    • pp.215-224
    • /
    • 2006
  • 경쟁이 심화됨에 따라 브랜드 신뢰성의 중요성이 커지고 있다. 고객들은 브랜드에 대한 신뢰를 바탕으로 선택을 하는 경향이 있기 때문이다. 기업들이 경쟁사와 차별화 되며 신뢰성이 있는 브랜드 이미지를 구축하려는 다양한 시도의 결과로 브랜드 개성이라는 개념이 생겨났다. 브랜드 개성은 브랜드 아이덴티티 확립이라는 기업의 목적과 자신이 선택한 브랜드를 통해 자신의 이미지를 표현하려는 소비자의 목적을 동시에 만족시켜주는 수단이 되고 있다. 브랜드 개성의 중요성이 커짐에 따라, 많은 학자들이 다양한 방법을 동원하여 그것을 명확하게 측정하기 위한 시도를 전개했다. 그러나 대다수의 연구들은 측정과 데이터의 분식에 많은 노력과 오랜 시간이 소요될 뿐만 아니라, 그 결과를 명확하게 시각화할 수 없는 언어적, 정량적 방법에 의존하고 있는 실정이다. 이에 본 연구는 아바타를 활용하여 새롭고 가시적인 브랜드 개성 측정 방법을 개발하는 것을 목표로 한다. 본 연구의 결과는 다음과 같다. 첫째, 아바타는 브랜드 개성을 시각화하는 효과적인 매체가 될 수 있다는 가정(假定)이 입증되었다. 아바타는 얼굴과 의복, 자세와 동작 등을 통해 인간의 개성을 나타내 줄 수 있으므로, 목적에 부합되도록 특별하게 디자인된 아바타는 법인(法人)의 특성을 대변하는 브랜드의 개성을 독창적으로 표현해 줄 수 있다. 둘째, 브랜드 개성이 여러 가지 유형으로 분류될 수 있고, 그 분류가 브랜드 개성 아바타를 디자인하는 데 필요한 지침으로 활용될 수 있다는 점이 명확해졌다. 셋째, 특별하게 디자인된 브랜드 개성 아바타의 효용성을 실제로 활용하여 실험을 한 결과, 아바타가 구체적이고 직관적으로 브랜드 개성을 측정하는 데 효과적인 것으로 나타났다. 정확성 검증 실험을 통해서는 아바타들이 브랜드 개성 유형을 적절하게 표현하고 있음을 밝혔으며, 특히 아바타를 이용하여 기존 브랜드들의 개성을 측정해 본 결과, 아바타가 언어보다 브랜드 개성의 판단에 효과적이라는 것이 입증되었다.

  • PDF

시간활동 접근법에 의한 면 보건요원의 업무량 분석 (Measuring Myun Health Worker's Performance by Time-Activity Approach)

  • 김한중;김문식
    • Journal of Preventive Medicine and Public Health
    • /
    • 제10권1호
    • /
    • pp.34-43
    • /
    • 1977
  • This study attempts to examine the performances of Myun Health Workers-the frontline workers in the Korean rural health care delivery system. The time-activity approach was mainly utilized as a measuring tool. This study was undertaken in September 1976 with 35 Myun Health Workers at the Kang Wha County. The pretested time-activity approach sheets were filled out daily for one month by those Myun Health Workers themselves. Statistical means and variances of analysis were utilized for statistical method in comparing some activities and functions converged into time distribution Findings: 1. The workers's average working hours derived in this study is 8 hours and 48 minutes per day, which takes half an hour longer than normal schedule. 2. They spend 56% working hour for direct services, in other words, the main function, 22% for supportive function, and 22% for other activities, the unrelated health services. 3. Considering the total working hours of main function, out-center activity is far more than in-center services with the ratio of 70% to 30% respectively, which proves, therefore, that the main activity of the workers is home visiting. 4. It takes 20 minutes purely for home visiting and takes 14 minutes for transportation. 5. This research also indicates that such factors as characteristics of the health workers and myun influence in shaping the structures of the worker's function and activity: a. The workers whose working site is located in myun office spend 15% among total working hours in carring out official myun activities, which is incidentally unrelated to health services, while the health subcenter have no rooms for administrative jobs for myun office. b. The workers whose office is in health subcenter contribute much time in doing main function and those working in special project distribute more time in performing supportive function. c. The types of workers are another dominant factor to influence the components of worker's functions and activities. MCH workers and MPW I spend much time for manipulating main function. d. MPW II, whose function is reorganized by special project in 2 myuns shows different pattern of time distribution compared to the TB worker orFP worker in the ordinary area. MPW II distributes their time evenly in performing MCH program, T.B. Program, F.P. program and education activity, while the unipurpose workers engage in carring out only their dominant role. e. Another variables which involve the variation of the worker's activity can be illustrated with the variables like target population, size of myun and convenience for transportation, among which the latter two are remarkable factors in determining the time for out-center service.

  • PDF