• Title/Summary/Keyword: Ton

Search Result 2,651, Processing Time 0.03 seconds

Distributions and Budgets of Nitrogen and Phosphorus in Hiroshima Bay (Hiroshima만에서의 질소, 인의 분포 및 수지)

  • Kim Do-Hee
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.2 no.1
    • /
    • pp.74-89
    • /
    • 1999
  • Distributions and budgets of nitrogen and phosphorus in inner and central areas of Hiroshima bay were investigated for three years from January 1991 to December 1993. The mean loadings of nitrogen and phosphorus Stowed into the entire bay were 870 tonN/month and 129 tonP/month, respectively. About 79 % of nitrogen and 84 % of phosphorus loadings were flowed into the inner area. The TN:TP and DIN:DIP atomic ratios of the discharged freshwater were about 15 and 21, respectively. The PON:POP and DIN:DIP atomic ratios of seawater in the bay varied from 8 to 14 with a mean value of 11, and from 8 to 18 with a mean value of 12, respectively. Estimated fluxes of nitrogen and phosphorus based on the exchange of seawater were 585 tonN/month and 106 tonP/month, respectively, from the inner area to the central area, whereas those fluxes were 62 tonN/month and 107 tonP/month, respectively, from the central area to Akinada. When the remainders of nitrogen and phosphorus substracted outflows from inflows should be sunk, sink fluxes of nitrogen and phosphorus per surface area of the entire bay would be about 9.83 gN/m²ㆍyr and 0.27 gP/m²ㆍyr, respectively. In the central area, the remainders of nitrogen and phosphorus were greater than those in inner area. The residence times of nitrogen and phosphorus were estimated to be about 112 days, respectively, in the entire of Hiroshima Bay.

  • PDF

Estimation of Total Material Requirement in Expressway Construction using Material Flow Analysis which is based on the Life Cycle Assessment (LCA기반 물질흐름분석 기법을 이용한 고속도로 건설에서의 총 자원요구량 산정)

  • Kong, Chan-Hwi;Hwang, Yong-Woo;Moon, Jin-Young;Kwak, In-Ho
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.38 no.8
    • /
    • pp.403-410
    • /
    • 2016
  • During expressway construction it has been input a lot of material, but it does not manage to estimate quantitatively. In this study, the total material requirement for construction of expressway, which separated direct material requirement and indirect material requirement each section was quantified by combining life cycle assessment (LCA) and material flow analysis (MFA). In the direct material requirement, sand 2.27E + 04 ton/km, limestone 1.02E + 04 ton/km and gravel 4.47E + 03 ton/km were required, in the indirect material requirement, gravel 2.75E + 04 ton/km, iron 9.80E + 03 ton/km and coal 9.74E + 03 ton/km were required. Material such as sand, limestone which has high direct material requirement is require of excess input prevention from construction site, and material such as iron, rare metals(chrome, nickel) and coal which has high indirect material requirement is require additional studies of resource management.

A Study on the Calculation of $CO_2$ Emission and Road Freight Environmental Index for Logistics Companies (물류기업의 온실가스 배출량 및 도로화물환경지표 산정에 관한 연구)

  • Kim, Jong-Hyeon;Kim, Hong-Sang;Choe, Sang-Jin;Park, Seong-Gyu;Kim, Jeong;Jang, Yeong-Gi
    • Journal of Korean Society of Transportation
    • /
    • v.29 no.2
    • /
    • pp.25-35
    • /
    • 2011
  • In order to reduce Green House Gas(GHG) reduction in the road freight sector and thus establish green logistics, running efficiency of goods vehicles is of paramount importance. Providing effective transportation infrastructure can contribute to achieve the green logistics by reducing empty running of heavy goods vehicles and van, increasing the average payload on the vehicle, and shifting the transportation mode. In order to reduce the environmental impact from the road freight sector, it is essential to quantify the amount of environmental loading from the sector. However, any systematic survey on the environmental loading from the logistics companies has not been carried out in Korea. In this study, the environmental index for the road freight sector is defined as the amount of $CO_2$ emission per ton km generated from goods vehicles. The computational analysis shows that the average $CO_2$ emission per ton km generated by the logistics companies in Korea is $363g-CO_2/ton{\cdot}km$. Compared to UK (=$130g-CO_2/ton{\cdot}km$) and France (=$97g-CO_2/ton{\cdot}km$), the efficiency of logistics in Korea is 2.8 and 3.7 times as low as in the advanced countries. It also indicates that the main reasons for the low efficiency are mainly due to the high rate of empty operation of goods vehicles and the low payload.

The Destruction of Bacterial Spores Upon Compressional Pressure (타정 압력에 의한 세균포자의 파괴현상)

  • Lee, Cherl-Ho;Kim, Young-Man;Lee, Jung-Chi;Jung, Pil-Keun
    • Korean Journal of Food Science and Technology
    • /
    • v.12 no.4
    • /
    • pp.272-277
    • /
    • 1980
  • The tolerance of useful bacterial spores to the conditions of tablet making, specifically, the destruction of bacterial spores upon compressional pressure was investigated. The damage of bacterial spores occurred mainly during the tabletting. The bacterial spores obeyed a logarithmic destruction rate upon compressional pressure. The spore destruction rate was dependent upon the strains of microorganism. The Decimal Reduction Pressure, designated as P-value, were $2.9\;ton/cm^2$, $2.6\;ton/cm^2$ and $2.1\;ton/cm^2$ for the spores of Bacillus subtilis, Bacilus coagulans and Clostridium butyricum, respectively, and $1.7\;ton/cm^2$ for the vegetative cell of Streptococcus faecalis. The spore destruction upon compressional pressure was influenced by the type of filler. The P-value of the spore of B. coagulans was $2.8\;ton/cm^2$ in the lactose filler, but $2.0\;ton/cm^2$ in the starch filler. The number of viable spores was inversely proportional to the hardness and density of tablet, in case that the same type of filler was used. The starch filler, which resulted in the lower hardness and lower density of tablet, caused higher spore destruction rate compared with the lactose filler.

  • PDF

Estimation of Danger Zone by Soil Erosion Using RUSLE Model in Gyeongju National Park (RUSLE 모형을 이용한 경주국립공원의 토양침식 위험지역 추정)

  • Choi, Chul-Hyun;You, Ju-Han;Jung, Sung-Gwan
    • Korean Journal of Environment and Ecology
    • /
    • v.27 no.5
    • /
    • pp.614-624
    • /
    • 2013
  • The purpose of this study is to offer the raw data for establishing the plan of disaster prevention and the continuous conservation of soil ecosystem by grasping the potential soil loss and the danger of erosion using RUSLE method on whole districts in Gyeongju National Park, Korea. In the results of the average amount of soil erosion for the year, the average of all districts was 5.7 ton/ha in annual, and Namsan district was the highest in 7.6 ton/ha in annual and Seoak district was the lowest in 2.1 ton/ha in annual. The dangerous district due to the soil erosion was analyzed as under 1%, and Gumisan and Hwarange district was not serious. But Namsan district was higher than others, especially, there was intensive in all over Geumohbong. Therefore, to protect the all over Geumohbong, we will establish the valid of restoration and management. The types of land cover in Gyeongju National Park mostly showed forest, and as the average amount of soil erosion in forest was 3.7 ton/ha in annual, there was good condition. In the results of the amount of soil erosion due to landform, the deep canyon showed as 7.3 ton/ha in annual per unit area, secondly, the U-shaped valley was analyzed as 6.1 ton/ha in annual. The plain and high ridge were predicted that there occurred the small amount of soil erosion. In future, if we will analyze the amount of soil erosion in Korean National Parks, we will offer the help to establishing the plan of conservation and restoration on soil ecosystem in whole National Parks.

Flotation for Improving Grade of Domestic Fine Coal (국내산(國內産) 미립(微粒) 석탄(石炭)의 품위향상(品位向上)을 위한 부유선별(浮遊選別) 연구(硏究))

  • Han, Oh-Hyung;Kim, Min-Gyu;Kim, Byoung-Gon
    • Resources Recycling
    • /
    • v.22 no.6
    • /
    • pp.64-72
    • /
    • 2013
  • The purpose of this study is to confirm the possibility of obtaining high grade coal from 57.39% of fixed carbon fine coal. Also, the mineralogical, physical/chemical and liberation characteristics are to be identified to decrease in ash amount, during the pre-processing of clean coal technology. In this study, batch flotation and CPT column flotation proper for the processing of fine particles were used with the variation in kinds and quantity of frother, collector and depressant. Also air flow rate and feeding rates were examined. As a result of batch flotation using 20% of pulp density DMU 101 collector(100 mL/ton), AF65 frother(300 mL/ton), sodium metaphosphate depressant (1 kg/ton), 67.57% of ash rejection and 70.90% of combustible recovery were obtained. The result of CPT column flotation was 85.59% of ash rejection and 88.97% of combustible recovery under the conditions of 5% of pulp density, DMU-101 collector (100 mL/ton), AF65 frother(10 L/ton), SMP depressant(1 kg/ton), wash water(100 mL/min.) and air flow rate(1,200 mL/min.).

Effects of application rates of mineral N and cattle slurry on the dry matter yield and efficiency of N utilization of Reed canarygrass grown in different cutting frequency (예취빈도가 다른 조건에서 무기태 질소와 액상구비의 시용이 Reed canarygrass의 건물수량과 질소이용효율에 미치는 영향)

  • Lee, J.S.;Jo, I.H.
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.2 no.2
    • /
    • pp.53-63
    • /
    • 1994
  • In order to investigate the effects of application rates of mineral N and cattle slurry on the dry matter yield of Reed canarygrass grown in different cutting frequency, was was cernpared for the efficiency of N utilization. Annual rates of mineral N and cattle slurry N of 0 (control), 90kg, 180kg, 270kg and 360kg/ha in 3 cuttings, 0, 120kg, 240kg, 360kg and 480kg/ha in 4 cuttings, and 0, 150kg, 300kg, 450kg and 600kg/ha were applied as urea and cattle slurry in 5 cuttings, respectively. The results were summarized as follows: 1. The annual dry matter yields were increased with application rates of mineral N and cattle slurry. The annual dry matter yields of mineral N obtained were 14.4 ton/ha(ranged from 10.46 ton to 16.91 ton/ha) in 3 cuttings, 13.88 ton/ha(ranged from 9.91 ton to 16.53 ton/ha) in 4 cuttings and 15.98 ton/ha(ranged from 12.0 ton to 18.25 ton/ha) in 5 cuttings. The annual dry matter yields of cattle slurry obtained were 12.14ton/ha(ranged from 8.92 ton to 11.79ton/ha) in 3 cuttings, 10.81ton/ha(ranged from 8.92 to 11.79 ton/ha) in 4 cuttings and 12.98ton/ha(ranged from 10.68 ton to 14.85ton/ha) in 5 cuttings. 2. Relative dry matter yield of cattle slurry as compared to mineral N were 84.3%, 77.9% and 81.2% in 3, 4 and 5 cuttings. 3. Average increase in dry matter production(kgDM/kgN) tended to decrease with application rates of mineral N and cattle slurry, and higher cutting frequencies. Average increase in dry matter production obtained were higher values at rates of 30kg/ha/cut in both of mineral N and cattle slurry. Average increase in dry matter production to mineral N were 23.9kg, 18.8kg and 15.2kgin 3, 4 and 5 cuttings, respectively. 4. Average increase in total nitrogen yield(kgTN/kgN) to mineral N obtained were 0.46kg at rates of 60kg/ha/cut in 3 cuttings, and 0.45kg and 0.40kg at rates of 30kg/ha/cut in 4 and 5 cuttings. 5. Average increase in dry matter production(kgDM/kgN) to cattle slurry obtained were 13.7kg and 19.5kg at rates of 30kg/ha/cut in 3 and 4 cuttings, and 9.7kg at rates of 60kg/ha/cut in 5 cuttings. 6. Average increase in total nitrogen yield(kgTN/kgN) to cattle slurry was not concern to the rates of application. Average increase in total nitrogen yield to cattle slurry obtained were 0.11kg, 0.20kg and 0.21kg in 3, 4 and 5 cuttings. 7. Relative average increase in dry matter production of cattle slurry as compared to mineral N were 33.1%, 52.1% and 50.0% in 3, 4 and 5 cuttings. Relative average increase in total nitrogen yield of cattle slurry as compared to mineral N were 28.9%, 51.3% and 55.3% in 3, 4 and 5 cuttings.

  • PDF

Computation and Assessment of Delivery Pollutant Loads for the Streams in the Nakdong River Basin (낙동강 소수계별 유달부하량 산정 및 평가)

  • Yoon, Young-Sam;Yu, Jae-Jeong;Kim, Moon-Su;Lee, Hae-Jin
    • Journal of Korean Society on Water Environment
    • /
    • v.22 no.2
    • /
    • pp.277-287
    • /
    • 2006
  • Production loads of the contaminants near the Nakdong-river are, BOD : $1,006ton{\cdot}day^{-1}$, TN : $117ton{\cdot}day^{-1}$, and TP : $21ton{\cdot}day^{-1}$. Among the sources of contamination, the biggest contribution to the production load was shared by the human population, which maintains 40.7% of BOD, 44.2% of TN, and 52.5% of TP production. Similarly, among the sources of discharge load, the human population contributed 45.0% of BOD, 34.5% of TN, and 45.8% of TP. Results of flow investigation in 2001 and 2002 indicate that among the side streams, Nam-river showed the greatest average flow. In case of main stream flow, it was increased in the downstream due to the increase of the influents from the side streams. In case of BOD, COD, TOC and SS, high values were detected at Keumho-river where industrial wastewater was discharged as high level concentration. In case of the main stream, Koryoung point where direct influence of Keumho-river and Seongseo industrial complex is evident showed high BOD, COD and TOC. Oxidized nitrogen compounds and total nitrogen showed similar patterns of BOD, COD, and TOC. Especially, nitrate nitrogen was relatively high at all points. However, in case of Chlorophyll-a, relatively high values were observed at mid- and downstream areas such as Koryoung, Namjee, Soosan, Moolkeum and Hakooeun. This could be caused by the slow flow rate and the abundant nutrient salts attributed by the side streams. Relatively better water quality was observed in 2002 when the flow was relatively abundant than that in 2001. Results of investigation during 2001-2002 showed that delivery load increased as the flow reaches downstream. In 2001, delivery loads at the downstream Soosan-bridge were BOD $22,152ton{\cdot}day^{-1}$, COD $45,467ton{\cdot}day^{-1}$, TN $22,062ton{\cdot}day^{-1}$, TP $926ton{\cdot}day^{-1}$. Delivery loads in 2002 were increased due to the increase of the rainfall. They are BOD $25,876ton{\cdot}day^{-1}$, COD $64,200ton{\cdot}day^{-1}$, TN $41,101ton{\cdot}day^{-1}$, and TP $1,362ton{\cdot}day^{-1}$.

Hydroacoustic survey on distribution and density of fisheries resources in the Marado coastal area of Jeju, Korea (제주도 마라도 연안해역의 어업생물자원에 대한 분포밀도의 음향학적 조사)

  • SEO, Young-Il;OH, Taeg-Yun;CHA, Hyung-Kee;LEE, Kyounghoon;YOON, Eun-A;HWANG, Bo-Kyu;LEE, Yoo-Won;KIM, Byung-Yeob
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.52 no.3
    • /
    • pp.209-219
    • /
    • 2016
  • The survey was conducted to investigate biomass and distribution of fisheries resources using a quantitative echo sounder and a fixed gillnet around Marado coast of Jeju to obtain the scientific basic data for dispute resolution with a large purse seine fishery and coastal fishing and policy establishment of reasonable fisheries resources. Hydroacoustic surveys were conducted six times (November 28~29, 2015 (night), February 23~24, 2016 (night) and March 3~4, 2016 (night/day), March 30~31, 2016 (night/day)) using a quantitative echo sounder. The pelagic fish densities were relatively higher around Marado in November 2015, February 2016 and March 3~4, 2016. However, demersal fish densities were relatively higher in Jeju coastal waters on March 30~31, 2016. Catch data using fixed gill net were used to calculate biomass. Based on the hydroacoustic data, fish length-weight function and target strength information of dominant fish, the biomass of fishes were estimated as follow: 5.64 ton CV = 70.2% at night on November 28-29 2015, 7.14 ton CV = 35.8% of pelagic fish and 530.77 ton CV = 34.6% of demersal fishes at night on February 23-24 2016, 2.34 ton CV = 56.7% of pelagic fish and 571.93 ton CV = 40.3% of demersal fish at daytime, 1.39 ton CV = 48.4% of pelagic fish and 194.59 ton CV = 54.3% of demersal fish at night on March 3~4 2016, 0.37 ton CV = 72.9% of pelagic fish and 338.79 ton CV = 99.7% of demersal fish at daytime, 0.24 ton CV = 21.3% of pelagic fish and 68.61 ton CV = 53.8% of demersal fish at night on March 30~31 2016.

Effect of Tillage Depth and Amount of Compost on Red Pepper Growth (경운깊이 및 퇴비 시용량이 고추 생육에 미치는 영향)

  • Lee, Gyeong-Ja;Kim, Young-Sang;Song, In-Gyu
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.43 no.6
    • /
    • pp.798-803
    • /
    • 2010
  • Experiments were conducted to find out the optimum amount of compost and tillage depths in pepper cultivation. Red pepper was grown in different plots with 10 cm, 30 cm, and 50 cm in tillage depth, and was applied with 1 ton, 3 ton, and 5 ton $10a^{-1}$, respectively. The pH value in soil showed lower level after experiment than before experiment, however, the contents of the EC, Av. $P_2O_5$, K, Ca, Mg, and Na were increased after experiment. The chemical contents in soil after experiment showed higher level in compost 5 ton $10a^{-1}$. The growth of red pepper in field was enhanced in the compost treatment of 3 ton, 5 ton $10a^{-1}$, and tillage 50 cm plot. In tillage 10 cm plot, yields of red pepper showed the highest amount as 5,880 kg $ha^{-1}$ with compost 3 ton $10a^{-1}$. In tillage 30 cm plot, the yields of red pepper showed the highest as 5,610 kg $ha^{-1}$ with compost 5 ton $10a^{-1}$. The T-N contents and uptake in the red pepper plant increased in the compost in 3 ton $10a^{-1}$ and 5 ton $10a^{-1}$ compared to 1 ton $10a^{-1}$. These results suggest that different amounts of compost should be applied when we cultivate crops with different tillage depth.