• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.7
• /
• pp.122-132
• /
• 1996

It can be expected that the tolerances of the parts are assigned systematically and thus the parts are designed considering the assemblability in advance in the design stage, if the tolerances can be stored together with the geometric model of the parts and the assemblability of the parts is verified in the computer. In other words, an example of the concurrent engineering is realized. To verify the concepts described above, a new method is proposed to verify the assemblability when the tolerance information and the geometric model of the parts of an assembly are given. This method determines the assemblability by subdividing the range of relative motion between parts until the subdivided region corresponding to free of interference can be found.

• Journal of Korean Society on Water Environment
• /
• v.29 no.2
• /
• pp.196-203
• /
• 2013

Seungchon Weir was constructed in 2010 on the downstream region of Yeongsan River watershed for four major river projects. The purpose of our study was to determine whether fish compositions and distributions differ between the upper ($U_w$) and lower regions ($L_w$) of Seungchon Weir during May - December 2011 along with hydroacoustic fish surveys using Eco-Sounder monitoring ($E_SM$) technique. Total number of fish species sampled by conventional fish sampling at all sites was 29, and 21 and 24 species occurred in the $U_w$ and $L_w$, respectively. Most dominant species was Hemiculter eigenmanni (43%) in the $U_w$ and Opsaiichthys uncirostris amurensis (21%) in the $L_w$, indicating a distinct differences of the species composition. According to hydroacoustic approach of ESM, fish density was significantly higher (p < 0.05) in the $L_w$ section of 250 m than any other sections, This outcome indicates that fishes moving toward the upstream were blocked by weir construction. According to analysis of tolerance guilds, tolerant species (TS) were made of 88% and 79% in the $U_w$ and $L_w$ region, respectively, while the proportions of sensitive species were < 0.1% of the total in the both regions. Trophic guild analysis showed that the proportion of omnivore species were 58% and 40% in the $U_w$ and $L_w$ region, respectively, while insectivores were made of 16% and 21% in the $U_w$ and $L_w$ region, respectively. Both analyses of tolerance guilds and trophic guilds indicate the biological degradation of the waterbody. Fish community structure analysis, based on species diversity, dominance, and evenness indices, showed higher community stability in the $L_w$ region than $U_w$ region. Exotic species of largemouth bass were largely increased in this survey (14%), compared to the past (< 1%), indicating a modification of fish trophic structure.

• Journal of Nutrition and Health
• /
• v.42 no.7
• /
• pp.622-630
• /
• 2009

The purpose of this study was to establish an association between glycemic index (GI), glycemic load (GL), dietary carbohydrates and diabetes with the context of the current population dietary practice in Korea. The subjects of 3,389 adults (male 1,430, female 1,959) were divided into normal (serum fasting glucose < 100 mg/dL), impaired glucose tolerance (100 ${\leq}$ serum fasting glucose < 126 mg/dL), diabetes (serum fasting glucose > 126 mg/dL) by serum fasting glucose. Anthropometric and hematologic factors, and nutrient intakes, dietary glycemic index (DGI), dietary glycemic load (DGL) were assessed. Multiple logistic regression model was used to determine the odds ratios (ORs) and 95% confidence intervals for relationship of DGI, DGL, carbohydrates intakes, and diabetes. DGI and DGL were not significantly correlated with impaired glucose tolerance and diabetes. However, the risk of impaired glucose tolerance and diabetes showed a tendency to increase as increase of DGI after multivariate adjustment (age, education, income, region area, diabetes family history, smoking, drinking, exercise, energy intake) in male. The risk of impaired glucose tolerance and diabetes showed a tendency to increase in the DGI 71.1-74.8 after multivariate adjustment in female. DGL was inversely related to impaired glucose tolerance and diabetes in male. In female, however, DGL was positively related to impaired glucose tolerance and diabetes. In particular, the risk of diabetes increased positively in level of DGL 260.5, and remained after multivariate adjustment (Q5 vs Q1：2.38, 0.87-6.48). When percent energy intakes from carbohydrates were more than 70%, the risk of impaired glucose tolerance and diabetes increased in both male and female. In particular, when percent energy intakes from carbohydrates were more than 69.9%, the risk of diabetes increased positively in male (Q4 vs Q1：2.34, 1.16-4.17). In conclusion, above 70% energy intakes from carbohydrates appeared to be a risk factor of diabetes. It seemed that the meal with high GI and GL value must be avoided it. And also, the macronutrients of the meal must be properly balanced. In particular, it may be said that it is a preventive way for treatment of the diabetes to avoid eating carbohydrates of much quantity.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.7
• /
• pp.80-91
• /
• 1999

We present various optimal grating structures which give the low threshold gain, good modulation characteristics, small effective linewidth enhancement factor, and large fabrication tolerance in complex-coupled MQW DFB lasers with absorptive gratings. To obtain these, we calculate the complex coupling coefficients using the extended additional layer method and the threshold gain including the modal loss in the absorptive grating region for rectangular and trapezoidal gratings. Based on the comparison of the results for various possible absorptive grating structures, the design guidelines are presented to obtain the low threshold gain or large fabrication tolerance. Among the grating structures studied, the double grating structure consisting of the absorptive grating on the index grating has the largest fabrication tolerance for the threshold gain and the coupling strength. The fabrication tolerance for the coupling ratio is very large for all the grating structures studied.

• KIEAE Journal
• /
• v.8 no.5
• /
• pp.49-54
• /
• 2008

The experimental of temperature, humidity and velocity was taken from the underground pit which utilized the system of ground heat source quite similar to the cool-pit system. Also, through CFD analysis, one could review the effectiveness of analysis of future alternatives. Furthermore, the temperature range of mock up cool-pit system was analyzed by inputting the weather data of annual average soil temperature provided by KMA(Korea Meteorological Administration) into the fluid simulation of anticipated heat distribution. Firstly, the difference between the temperature of air exhaust of the pit or the temperature of air supply of the compressor room and the experimental data for the month of May from the CFD analysis came out to be $0.6^{\circ}C$ and $0.9^{\circ}C$ respectively with tolerance of 3.1% and 4.7%. Secondly, the difference between the temperature of air exhaust of the Pit or the temperature of air supply of the compressor room and the experimental data for the month of July from the CFD analysis came out to be $0.8^{\circ}C$ and $1.1^{\circ}C$ respectively with tolerance of 3.3% and 4.5%. Thirdly, for the month of May, the difference between the experimental data taken for the air exhaust of the Pit or the air supply of the compressor room and soil temperature provided by KMA for monthly and yearly average temperature of Jeonju region came out be $1.9^{\circ}C$ and $1.8^{\circ}C$ respectively with tolerance of 10.7% and 9.8%. Fourthly, for the month of July, the difference between the experimental data taken for the air exhaust of the Pit or the air supply of the compressor room and soil temperature provided by KMA for monthly and yearly average temperature of Jeonju region came out be $1.1^{\circ}C$ and $1.4^{\circ}C$ respectively with tolerance of 4.5% and 5.8%. The result of above experiments allowed us to establish CFD model set up as a verification tool that is based on experimental data collected within the Pit area. Also, one could confirm the possibility to apply weather data of soil temperature provided by KMA in order to anticipate proper value for CFD analysis.

• The Plant Pathology Journal
• /
• v.35 no.4
• /
• pp.372-380
• /
• 2019

Pseudomonas syringae pv. actinidiae (Psa) is by far the most important pathogen of kiwifruit. Sustainable expansion of the kiwifruit industry requires the use of Psa-tolerant or resistant genotypes for the breeding of tolerant cultivars. However, the resistance of most existing kiwifruit cultivars and wild genotypes is poorly understood, and suitable evaluation methods of Psa resistance in Actinidia have not been established. A unique in vitro method to evaluate Psa resistance has been developed with 18 selected Actinidia genotypes. The assay involved debarking and measuring the lesions of cane pieces inoculated with the bacterium in combination with the observation of symptoms such as callus formation, sprouting of buds, and the extent to which Psa invaded xylem. Relative Psa resistance or tolerance was divided into four categories. The division results were consistent with field observations. This is the first report of an in vitro assay capable of large-scale screening of Psa-resistance in Actinidia germplasm with high accuracy and reproducibility. The assay would considerably facilitate the breeding of Psa-resistant cultivars and provide a valuable reference and inspiration for the resistance evaluation of other plants to different pathogens.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.19-21
• /
• 2008

The purpose of this paper is the optimal design of a single-phase LSPM(Line-Start Permanent Magnet Motor). A single-phase LSPM has a permanent magnet in the rotor that is same as induction motor. For that reason, magnet is operated by breaking torque in starting region and alignment torque in driving region. Therefore, we need the design process considering the trade-off relationship. In this paper, we propose the design process of a single-phase LSPM for a high starting torque and efficiency with equivalent circuit and FEM. And we use Taguchi Method for considering tolerance in manufacture. Finally, we compared the LSPM that is designed in this paper and conventional induction motor.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.47-50
• /
• 2004

It is very important that the analysis of postbuckling characteristics for stiffened composite structure. Damage tolerance design concept has been imported in many aerospace structures design to increase the structural efficiency and material failure is an inevitable process in postbuckling behavior. These design concepts are very efficient but consume very much calculation time in analytical process. The proper analysis method for reducing calculation time was researched and the total analysis time was reduced. A selection of proper element, the large load increments in linear response region, and the termination of analysis for unnecessary region were imported in the analysis and about $70\%$ time reduction was achieved with keeping a high accuracy of results.

• Korean Journal of Microbiology
• /
• v.26 no.3
• /
• pp.256-261
• /
• 1988

Samples from Naktong Estuary had been taken for the characterization of heterotrophic bacterial communities and of the effects of environmental factors on their distribution in estuarine ecosystem. Bacterial communities isolated from seawater region were composed of more euryhalone groups than those from freshwater region, and the bacterial communities of summer were composed of more eurythermal groups than those of winter. Bacterial commnities became more diverse by the input of allochthonous bacteria from terrestrial and freshwater ecosystem, but less diverse by worse environmental conditions such as nutrient load, high salinity, low temperature, and so on.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.1
• /
• pp.29-35
• /
• 2014

The purpose of this paper is the rotor design of a single-phase LSPM(Line-start permanent magnet) motor. A single-phase LSPM motor has a permanent magnet in the rotor that is same as induction motor. For that reason, magnet is operated by breaking torque in starting region and alignment torque in driving region. Therefore, we need the design process considering the trade-off relationship. In this paper, we propose the design process of a single-phase LSPM motor for a high starting torque and efficiency with FEM. And we use Taguchi Method for considering tolerance in manufacture. Finally, we compared the LSPM motor that is designed in this paper and conventional induction motor.