• 대한화학회지
• /
• 제42권1호
• /
• pp.42-50
• /
• 1998

산화티탄을 전극 재료로 사용하기 위해서는 투명하고 수용액에 안정한 재료가 필요하다.아세틸 아세톤 티탄(IV)으로부터 분사방법을 이용하여 산화티탄의 안정한 박막을 얻었다. 결정 모양은 구형을 나타내었으며, 결정의 크기는 온도가 증가함에 따라 증가하였고 두께는 감소하는 경향을 나타내었다. XRD 데이타로부터 아나타제 결정이 400$^{\circ}C$ 에서부터 얻어지기 시작함을 관찰하였다. 440$^{\circ}C$ 에서 만들어진 산화티탄이 고유 광전류가 최대값을 나타냈으며 가시광 영역에서 광전류가 증가하는 결과를 나타냈다. 가시광 영역에서의 광전류는 프탈로시아닌의 흡수 스펙트럼과 같은 ${\lambda}$max 위치에서 얻어졌고 이와 같은 결과는 프탈로시아닌의 결정 특성에 따른 광전류 특성으로 나타났다.

• 한국재료학회지
• /
• 제5권1호
• /
• pp.3-11
• /
• 1995

Titanium oxide$(TiO_{2})$ 박막을 금속 알콕사이드 물질인 $(Ti(OC_3H_7)_4$(titanium isopropoxide)를 이용하여 p-Si(100) 기판위에 상압 화학 기상 증착법으로 증착시켰다. $(TiO_{2})$ 박막의 증착기구는 단순경 계층 이론으로 잘 설명되었으며, 화학반응 지배 기구 영역에서 겉보기 활성화 에너지는 18.2kcal/mol이었다. 증착된 박막은 $250^{\circ}C$이상에서 anatase상의 결정질 박막이었으며, 고온에서 열처리를 했을 경우에 rutile상으로 전이하였다. 박막의 상전이에는 열처리 온도외에도 열처리 시간과 박막의 두께가 영향을 미쳤다. 정전용량-전압특성을 조사해 본 결과 전형적인 MOS 다이오드구조의 특성을 보였으며, 비유전율 상수는 약 80정도였다. 제조한 $(TiO_{2})$ 박막의 열처리 공정 후에는 정전용량이 감소하였으며, 첨가물을 사용한 박막은 열처리 전과 같았다. 이때 $V_{FB}$는 -0.5 ~ 1.5V였다. 전기전도 특성을 알아보기 위하여 전류-전압특성을 조사하였으며 증착된 박막의 전도기구는 hopping mechanism이었다. 전기적 특성을 개선하기 위해서 후열처리 방법과 박막 증착시 Nb, Sr을 첨가하였으며, 모두 누설전류의 감소와 정전파괴전압의 증가를 가져왔다.

• 한국세라믹학회지
• /
• 제56권1호
• /
• pp.98-103
• /
• 2019

Optical filters to control light wavelength of displays or cameras are fabricated by multi-layer stacking process of low and high index thin films. The process of multi-layer stacking of thin films has received much attention as an optimal process for effective manufacturing in the optical filter industry. However, multi-layer processing has disadvantages of complicated thin film process, and difficulty of precise control of film morphology and material selection, all of which are critical for transmittance and coloring effect on filters. In this study, the composite $TiO_2$, which can be used to control of UV absorption, coated on nano hollow silica sol, was synthesized as a coating material for optical filters. Furthermore, systematic analysis of the process parameters during the chemical reaction, and of the structural properties of the coating solutions was performed using SEM, TEM, XRD and photo spectrometry. From the structural analysis, we found that the 85 nm nano hollow silica with 2.5 nm $TiO_2$ shell formation was successfully synthesized at proper pH control and titanium butoxide content. Photo luminescence characteristics, excited by UV irradiation, show that stable absorption of 350 nm-light, correlated with a 3.54 eV band gap, existed for the $TiO_2$ shell-nano hollow silica reacted with 8.8 mole titanium butoxide solution. Transmittance observed on substrate of the $TiO_2$ shell-nano hollow silica showed effective absorption of 200-300 nm UV light without deterioration of visible light transparency.

• 한국재료학회지
• /
• 제34권3호
• /
• pp.152-162
• /
• 2024

In this study, we introduce a novel TiN/Ag embedded TiO₂/FTO resistive random-access memory (RRAM) device. This distinctive device was fabricated using an environmentally sustainable, solution-based thin film manufacturing process. Utilizing the peroxo titanium complex (PTC) method, we successfully incorporated Ag precursors into the device architecture, markedly enhancing its performance. This innovative approach effectively mitigates the random filament formation typically observed in RRAM devices, and leverages the seed effect to guide filament growth. As a result, the device demonstrates switching behavior at substantially reduced voltage and current levels, heralding a new era of low-power RRAM operation. The changes occurring within the insulator depending on Ag contents were confirmed by X-ray photoelectron spectroscopy (XPS) analysis. Additionally, we confirmed the correlation between Ag and oxygen vacancies (V_o). The current-voltage (I-V) curves obtained suggest that as the Ag content increases there is a change in the operating mechanism, from the space charge limited conduction (SCLC) model to ionic conduction mechanism. We propose a new filament model based on changes in filament configuration and the change in conduction mechanisms. Further, we propose a novel filament model that encapsulates this shift in conduction behavior. This model illustrates how introducing Ag alters the filament configuration within the device, leading to a more efficient and controlled resistive switching process.

• 치위생과학회지
• /
• 제11권5호
• /
• pp.405-410
• /
• 2011

본 연구의 목적은 표면 거칠기를 증가시키기 위하여 알루미나와 하이드록시아파타이트를 이용하여 각각 블라스팅 처리한 뒤 염화나트륨을 전해액 내에 섞어 양극산화 방법을 이용하여 염소가 함유된 표면을 만들고 항균력을 평가하는데 있다. 그리고 표면 특성과 항균력을 평가하여 다음과 같은 결과를 얻었다. 1. SEM 표면 관찰에서는 블라스팅 처리 후 양극산화한 결과 실험군 2와 3에서 연마처리한 실험군 1에 비해 거친 요철구조를 관찰할 수 있었다. 2. EDS 조성분석 결과 실험군 2에서는 칼슘, 인, 염소 성분과 더불어 알루미늄이 관찰된 반면, 실험군 3에서는 칼슘, 인과 염소 성분만을 관찰할 수 있었다. 3. 표면 거칠기 분석 결과 평균 표면 거칠기의 값이 실험군 2, 실험군 3, 실험군 1순으로 작았으며, 실험군 2와 3 간에는 유의한 차이가 없었다(p>0.05). 4. 항균력 평가 결과 실험군 2가 가장 적은 세균수를 보여 우수한 항균력을 보였으나 이는 실험군 3과 유의한 차이가 없었다(p>0.05). 알루미나와 하이드록시아파타이트를 이용하여 각각 블라스팅 처리한 뒤 염화나트륨을 전해액 내에 섞어 양극산화 방법을 이용하여 염소가 함유된 표면을 만들 수 있었으며, 그 결과 연마처리한 시편에 비해 높은 표면 거칠기와 우수한 항균력을 보였다. 그러나 그 재료의 효과와 안정성을 입증하기 위해서는 추가적인 in vitro와 in vivo 실험이 수행되어야겠다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.280-281
• /
• 2006

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of a Titanium dioxide ($TiO_2$) thin film by rf magnetron sputtering system for 15min under various rf power. A very low pretilt angle by ion beam exposure on the $TiO_2$ thin film was measured. A good LC alignment by the ion beam alignment method on the $TiO_2$ thin film surface was observed at annealing temperature of $200^{\circ}C$, and the alignment defect of the NLC was observed above annealing temperature of $250^{\circ}C$. Consequently, the low NLC pretilt angle and the good thermal stability of LC alignment by the ion beam alignment method on the $TiO_2$ thin film by sputter method as various rf power condition can be achieved.

• Bulletin of the Korean Chemical Society
• /
• 제23권5호
• /
• pp.741-744
• /
• 2002

Single phase of multicomponent oxide ZrTiO4 film could be prepared through surface sol-gel route simply by coating the mixture of 100 mM zirconium butoxide and titanium butoxide on $Pt/Ti/SiO_2Si(100)$ substrate, following pyro lysis at $450^{\circ}C$, and annealing it at 770 $^{\circ}C.$ The dielectric constant of the film was reduced as the film thickness decreased due to of the interfacial effects caused by layer/electrode and a few voids inside the multilayer. However, the dielectric property was independent of applied dc bias sweeps voltage (-2 to +2 V).The dielectric constant of bulk film, 31.9, estimated using series-connected capacitor model was independent of film thickness and frequency in the measurement range, but theoretical interfacial thickness, ti, was dependent on the frequency. It reached a saturated ti value, $6.9{\AA}$, at high frequency by extraction of some capacitance component formed at low frequency range. The dielectric constant of bulk ZrTiO4 pellet-shaped material was 33.7 and very stable with frequency promising as good applicable devices.

• 한국항행학회논문지
• /
• 제17권5호
• /
• pp.574-580
• /
• 2013

본 논문에서는 박막코팅기술의 공정은 고경도 박막과 질화층의 접합력을 높이기 위하여 적용하였다. 이 박막코팅기술은 프레스 금형에 사용되는 경도와 인성을 얻을 수 있는 복합 박막을 형성했다. 이러한 박막 코팅 생산 기술은 물리증착방법을 이용하여 진공 챔버의 진공도를 증가하고, 건파워의 투사율을 향상시켰다. 티타늄합금 타겟은 각종 정밀가공 부품에 복합박막코팅기술 개발을 통하여 성능과 표면재질을 개선하였다.

• 한국분말재료학회지
• /
• 제22권6호
• /
• pp.396-402
• /
• 2015

The organic binder-free paste for dye-sensitized solar cell (DSSC) has been investigated using peroxo titanium complex. The crystal structure of $TiO_2$ nanoparticles, morphology of $TiO_2$ film and electrical properties are analyzed by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Electrochemical Impedance Spectra (EIS), and solar simulator. The synthesized $TiO_2$ nanopowders by the peroxo titanium complex at 150, 300, $400^{\circ}C$, and $450^{\circ}C$ have anatase phase and average crystal sizes are calculated to be 4.2, 13.7, 16.9, and 20.9 nm, respectively. The DSSC prepared by the peroxo titanium complex binder have higher $V_{oc}$ and lower $J_{sc}$ values than that of the organic binder. It can be attributed to improvement of sintering properties of $TCO/TiO_2$ and $TiO_2/TiO_2$ interface and to formation of agglomerate by the nanoparticles. As a result, we have investigated the organic binder-free paste and 3.178% conversion efficiency of the DSSC at $450^{\circ}C$.

• Corrosion Science and Technology
• /
• 제3권1호
• /
• pp.6-13
• /
• 2004

The effect of inhibitors on the electrochemical behavior and the stress corrosion cracking resistance of Alloy 600(UNS N06600) was evaluated in 10% sodium hydroxide solution at $315^{\circ}C$. The specimens of a C-ring type for stress corrosion cracking test were polarized at 150 mV above the corrosion potential for 120 hours with and without inhibitors such as titanium oxide, titanium boride and cerium boride. The chemical compositions of the films formed on the crack tip in the C-ring specimens were analyzed using a scanning Auger electron spectroscopy. The cerium boride, the most effective, was observed to decrease the crack propagation rate more than a factor of three compared with that obtained in no inhibitor solution. It was found that the changes of the active-passive transition potentials and the film compositions were related to the resistance to stress corrosion cracking in high temperature caustic solution.