• Journal of The Korean Association For Science Education
• /
• v.30 no.4
• /
• pp.402-411
• /
• 2010

The purposes of this study are to analyze an argumentation between an astronomers group and a counter astronomers group that have concluded different results by using the same methods and to find an implication for applying to school science. For this study, two science research papers, which have been interpreted differently, were selected and analyzed in spite of observing same area in Titan and using same data process method. Their key issues are involved in interpretation and explanation, and the credibility of observed data. From this result, scientific argumentation accompanied with the credibility evaluation about the justification process of scientific explanation and experiment results needs to be developed.

• Food Science and Biotechnology
• /
• v.16 no.5
• /
• pp.722-727
• /
• 2007

Mucilage containing ${\gamma}-polyglutamic$ acid (PGA) was efficiently generated by the solid-state fermentation (SSF) of soybean grit by Bacillus firmus NA-1. B. firmus NA-1 was shown to be a glutamate-dependent strain for PGA production. The SSF of soybean grit was optimized in order to produce mucilage with a fortification of 5% glutamate, resulting in higher levels of mucilage production (6.14%) and a higher consistency index ($1.1\;Pa\;sec^n$). The sticky mucilage was comprised of 38% PGA, 7% levan, and some biopolymers. With regard to the viscoelastic properties of the mucilage solution, the viscous modulus (G") obtained from soybean grit fortified with 5% glutamate was approximately 64 times higher titan that of the mucilage solution obtained without glutamate. Although the addition of glutamate in the SSF of soybean grit influenced the rate of PGA production, the molecular weight of PGA remained unaltered, and was detected in a range between 1,400-1,440 kDa.

• Journal of the Mineralogical Society of Korea
• /
• v.2 no.2
• /
• pp.100-106
• /
• 1989

Die Titan-Augite sind die dominierenden Einsprenglings- und Grundmassephasen in allen tephritischen Gesteinen im Kaiserstuhl. Mg-Werte ($Mg/Mg+Fe^{2+}+Mn$) der Pyroxene schwanken von 60-85. Der FATS- und TITS-Anteil nimmt von phonolithischem Basanit und -Tephrit zum fraktionierten phonolithischen Tephrit hin ab. Die Kpx der einzelnen Gesteinsgruppen zeigen auch einen Fraktionier-ungstrend, der durch Abnahme von Si und Zunahme von Al vom phonolithischen Basanit und -Tephrit zum fraktionierten phonolithischen Tephrit gekennzeichnet ist. Der in Alkaligesteinen gewohnlich auftretende $gr{\ddot{u}}ne$ Kern der Px ist Fe-reicher und $Ti-{\ddot{a}}rmer$ als der $hellbra{\ddot{u}}nliche$-farblose Rand. Die $gr{\ddot{u}}nen$ Kerne weisen $gegen{\ddot{u}}ber$ den $hellbr{\ddot{a}}unlichen$ Randern $h{\ddot{o}}here$ $Na/Fe^{+3}$-Verhaltnisse auf.

• International Journal of Aeronautical and Space Sciences
• /
• v.2 no.2
• /
• pp.1-18
• /
• 2001

A numerical technique for simulating the separation dynamics of strap-on boosters jettisoned in the dense atmosphere is presented. Six degree of freedom rigid body equations of motion are integrated into the three-dimensional unsteady Navier-Stokes solution procedure to determine the dynamic motions of strap-ons. An automated Chimera overlaid grid technique is introduced to achieve maximum efficiency for multi-body dynamic motion and a domain division technique is implemented in order to reduce the computational cost required to find interpolation points in the Chimera grids. The flow solver is validated by comparing the computed results around the Titan IV launch vehicle with experimental data. The complete analysis process is then applied to the. H-II launch vehicle, the central rocket in japans space program, the CZ-3C launch vehicle developed in China and the KSR-III, a three-stage sounding rocket being developed in Korea. From the analyses, separation trajectories of strap-on boosters are predicted and aerodynamic characteristics around the vehicles at every time interval are examined. In addition, separation-impulse devices generally introduced for safe separation of strap-ons are properly modeled in the present paper and the jettisoning force requirements are examined quantitatively.

• The Journal of Korean Physical Therapy
• /
• v.4 no.1
• /
• pp.13-18
• /
• 1992

Most of the electromagnetic agents used in physical therapy rely for their effects on tissue heating and photoreaction of the body. Infrared and untraviolet light on the other hand, owns its place in medicine because it produces direct photochemial reaction when it interacts with the body. This study was carried out to investigate and review for photoreaction of the akin. The results were an follows. 1. The effects of the infrared are heat production, increasing metabolism, increasing circulation, vasodilatation and pigmentation. 2. Directed photoreactions are divided into acute reaction and chronic reaction, and the acute reaction makes pigmentation from $290\~320nm$ of ultraviolet ray. 3. Ultraviolet ray formated pigmentations, which are melanoblasts excited from ultraviolet ray and received chemical stimulation, that make melanin granule. 4. If exposured with long duration, at ultraviolet ray, it makes skin thickening and epithelioma. 5. Indirected photoreaction is made by existenced hypersensitivity of photoreaction or lack of photodefence structure. 6. The phototoxic reactions are synthesized by chemical reaction of excitement from ultraviolet ray also this time analysis, synthesis and polymerization from energy of a circumferenced substance. 7. Sunscreen substances are P-amino benzoic acid and oxidate titan.

• Industrial Engineering and Management Systems
• /
• v.15 no.4
• /
• pp.290-297
• /
• 2016

The successful transfer of technology, needs to recognize the industrial purposes, resources, technology, innovation and the mode of transmission, methods of transmission, influential factors, it's how to recruit and how to develop, and each of these cognitive relies on special expertise. One of the important technologies is automotive technology, and s technology is important for the transition and its development in recent years. Hence, in this paper, after studying Iran and the world's automotive and emerging technologies situation, the status of commercial vehicles and s technology model are studied based on external models, technical specifications, and cost. In this way, we examine the incidence and the applicability of the technology used in the production of heavy-duty vehicles, in recent years, with the passage of time, and we examine the technology lifecycle, from the perspective of physical characteristics and technical features. The results show that the technology of the studied heavy-duty vehicles (Titan) is close to the time of his fall, because spending puberty, so, according to the investigation of new technologies, we should strive to create changes in vehicle technology.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.2
• /
• pp.35-42
• /
• 2017

The TDD LTE MU-MIMO HARQ system is designed and implemented using GPU based on 3GPP Rel.10 standard. The system consists of the DU part of the base station and the terminal using the general computer based on the GeForce GTX TITAN graphics card provided by NIVIDIA, and constructed the part of the RU using USRP N210 provided by Ettus. In the implementation part, SDR standard is applied, so that various communication standards can be compatible with software. The retransmission is implemented by combining the previous data with the retransmission data using Chase Combining among HARQ methods. In order to confirm that the retransmission was successful, the performance evaluation used LLR constellation. First, if there is an error in the data, the LLR value is not distributed at the corresponding position. in this case, a retransmission is performed to chase combine the previously stored error data and retransmitted data. As a result, the LLR value was distributed at the position of the corresponding LLR value per bit. Through this, it can be confirmed that error - free data is formed by using Chase Combining after retransmission.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.2
• /
• pp.93-101
• /
• 2021

The purpose of this study is to analyze the adequacy of production capacity of the assembly process system of mobile bath vehicle's top box panel and process design through a simulation analysis. Towards this end, the layout of the facility designed with pre-verification job using a simulation modeling and an experiment, and facility, logistics process, and personnel input method were made into a simulation model, and the design system's adequacy was evaluated through an experiment. To produce 120 mobile bath vehicles annually, it was analyzed that 14 general workers and seven skilled workers were adequate through the experiment. It was also identified that three painting process lines carried out through outsourcing were adequate. Production lead time was 201.7 hours on average and it was 230 hours maximum. To meet customer delivery service level of 95% within the deadline when establishing a customer order and vehicle delivery plan, it was analyzed that more than 215 hours of lead time is needed minimum. If the process cycle time is reduced to 85% upon system stabilization and skillfulness improvement, it was analyzed that annual output of 147 vehicles can be achieved without additional production line expansion.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.6
• /
• pp.120-131
• /
• 2019

Recently, the level of fine dust and ultrafine dust has reached its highest level, threatening the public's health. If the air purifier was not operated indoors, natural ventilation would not be possible. In this study, photocatalyst is applied to building materials to purify air in a passive manner. In order to use photocatalyst for LEFC(Light Emotion Friendly Concrete), it is necessary to secure self-consolidating capability. Therefore, self-consolidating performance was evaluated by slump test, J-ring test and L-box test with UHPC materials applied. Based on these results, the mixture proportion was determined, and the mechanical performance was evaluated by compressive and flexural tests. Concrete blocks were constructed with a fabrication method that improved the existing process of making LEFC. Also, the concrete block was emptied as a way to reduce the use of expensive photocatalyst. Finally, in order to identify the distribution of TiO₂, an EDS analysis was performed.

• Current Research on Agriculture and Life Sciences
• /
• v.10
• /
• pp.147-155
• /
• 1992

This study was conducted to get basic information for factors affecting protoplast fusion between Petunia hybrida 'Titan red' and Nicotiana sanderae. The experiments such as fusogen, time of PEG treatment, temperature at fusion, $CaCl_2{\cdot}2H_2O$ concentration in fusion solution, and $CaCl_2{\cdot}2H_2O$ concentration and pH in eluting solution were carried out to increase the fusion efficiency. The results obtained were as follows; Fusion between P. hybrida and N. sanderae was accelerated when the mixture of the protoplasts was treated with 30% PEG 6,000 solution containing 5.5 mM $CaCl_2{\cdot}2H_2O$ for 10 minutes at $25^{\circ}C$, and subsequently eluted with a eluting solution containing 50 mM $CaCl_2{\cdot}2H_2O$ adjusted to pH 9.0.