• Bulletin of the Korean Chemical Society
• /
• v.24 no.8
• /
• pp.1219-1222
• /
• 2003

• Bulletin of the Korean Chemical Society
• /
• v.27 no.2
• /
• pp.189-190
• /
• 2006

• Bulletin of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.545-546
• /
• 2010

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.11a
• /
• pp.140-140
• /
• 1999

• Journal of Life Science
• /
• v.8 no.5
• /
• pp.473-478
• /
• 1998

The radical scavenging activity of the methanol extracts was in the order of doenjang〉 meju〉 soybean. The metha-nol extracts were further fractionated with dichloromethane, ethyl acetate, butanol and water in sequence. Among the solvent fractions of the methanol extracts, the ethyl acetate fraction demonstrated high levels of radical scave-nging activity. On the other hands, the nitrite scavenging activity of the methanol extrats was in the order of doen-jang〉soybean〉meju. All fractions from doenjang were exhibited the strong nitrite scavenging effect. Especially, $H_2O$, EtOAc and BuOH fractions with 6gmg/10$m\ell$ concentration exhibited much stronger nitrite scavenging effect than that of L-ascorbic acid. The ethyl acetate fraction showed remarkable antioxidant and nitrite scavenging effects compared with the other fractions obtained from soybean, meju and doenjang. The ethyl acetate fraction of doenjang was fur-ther purified by repeated chromoatograpic methods and isolated three compounds. There are identified as genistin, dai-dzein and genistein on the basis of spectral data.

• Macromolecular Research
• /
• v.17 no.4
• /
• pp.240-244
• /
• 2009

High molecular weight(MW), 3-arm star poly(methyl methacrylate)(PMMA) with a narrow MW distribution($M_n$=570,000 g/mol, PDI=1.36) was successfully synthesized by activators regenerated by electron transfer(ARGET) atom transfer radical polymerization(ATRP). The polymerization was carried out with a trifunctional initiator/$CuBr_2$/N,N,N',N",N"-pentamethyldiethy lenetriamine(PMDETA) initiator/catalyst system in the presence of a tin(II) 2-ethylhexanoate [$Sn(EH)_2$] reducing agent at $90^{\circ}C$. The concentration of the copper catalyst was as low as 30 ppm, and a high initiation efficiency of the initiating sites was obtained. The chain-end functionality of the high MW, 3-arm star PMMA was confirmed by a chain extension experiment with styrene via ARGET ATRP, using the same catalyst system.

• Journal of Surface Science and Engineering
• /
• v.28 no.1
• /
• pp.34-45
• /
• 1995

An amphiphilic nitroxide radical(2,2'6,6'-tetramethyl-4-octadecyioxy-1-piperidinyloxyl, TEMOPO) or mixture of TEMOPO and arachidic acid(Icosanoic acid, AA), was spread on water surface by the Langmuir-Blodgett(LB) method and surface pressure-area curve was measured. Such monolayer films of TEMOPO were transferred onto surfaces of photo transferable tin oxide electrodes(PTTO) by the LB method under various surface pressure with the transfer ratio of larger than 0.95 at the surface pressure higher than 15mN/m. The electrochemical effect of functional nitroxy radical monolayer onto semi-conductive electrode to electrolyte have been investigated by using LB method. Cyclic voltammetry technique was used for the electrochemical behavior measurement of TEMOPO monolayer onto the PTTO in 0.18 mo1/$dm^3$ $H_2SO_4$ solutions. The shape of voltammograms was found to change from one electrode to another. The amount of charge for the oxidation and the re-reduction of the cation to TEMOPO were evaluated from graphical integration. The amounts of charge were always smaller than those predicted from the $\pi$-$\sigma$ curves though the transfer ratio was unity. The poor reproducibility of the cyclic voltammograms was improved by the mixing with AA. Structure and arrangement of monomolecular layer on water surface and electrode were studied. Characteristics of monolayer film applied for the mediation reaction was also discussed by electrochemical method.

• Journal of Surface Science and Engineering
• /
• v.40 no.6
• /
• pp.254-257
• /
• 2007

TiN coating on tool steel has been widely used for the improvement of durability of tools. In this work, radical nitriding(RN) is carried out on SKD61 at $450^{\circ}C$ for 5 hours in the ammonia gas pressure $2.7{\times}10^3\;Pa$. The TiN coating is carried out by arc ion plating(AIP) with the process parameters: arc power 150 A, bias voltage -50V, coating time 40 minutes and nitrogen gas pressure $4{\times}10^3\;Pa$. Hardness, elastic modulus, friction coefficient and adhesion of TiN coating on substrates of both TiN/SKD61 and TiN/RN SKD61 coatings are investigated comparatively. The primary crystalline faces of TiN surface are(200) and(111) for TiN/SKD61 and TiN/RN SKD61 respectively. In addition to the primary phase, Fe phase exists in TiN/SKD61 coating, but not in TIN/RN SKD61. The hardness of TiN/RN SKD61 is about 700 Hv, 250 Hv(56%) higher than that of TiN/SKD61 at the near interface of TiN and substrates. At the TiN surface, hardness of TiN/RN SKD61 is 2,149 Hv, 71 Hv(3%) higher than that of TiN/SKD61. The elastic modulus of TiN coating is improved to 26.7 GPa(6%) by radical nitriding. The adhesion is improved by the RN coating showing no spalling. buckling and chipping on the scratch test track which are shown on the non-RN TiN/SKD61.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.3
• /
• pp.180-207
• /
• 2010

Technological innovations in the 21th Century greatly change the society. The radical advance in computer science brought changes and increased efficiency into society in general. The field of archaeology is also highly influenced and attempts to improve previous manually conducted field survey and research have been actively made. In order to supplement incomplete data set from archaeological excavation, the ways to use computer have been highly explored. GIS is one of them. However, use of GIS has been limited to document locations and to produce distribution map of features using digital map. There are no proper guides to employ GIS for academic research, so that it is hard for beginners to learn how to make use of GIS. In this paper, functions of GIS are introduced even for beginners, including definition of GIS and its archaeological use. It is also explained how to get DEM from digital map to do spatial pattern analysis. Various GIS special pattern analyses using DEM and 3D simulation are presented, as well.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.3
• /
• pp.51-60
• /
• 2003

In the radical char]go of the business environments that the existing facilities can not guarantee the business-frosts anymore, enterprises have been importing ERP system. In Korea, Sam-sung Electronics did it for the first tin in the latter half of 1994 and other enterprises succeeded. Currently, government and public enterprises as well as most of the large enterprises are employing ERP system to sharpen the competitiveness and to win the business transparency. On the other hand, it is harder for small and medium enterprises shaded by the large enterprises to be well-equipped with information system such as ERP, because they have already suffered from chronic financial difficulties and shortage of many resources. Most of all, they prefer the short-term project that does not need much tine for them to make decisions and to carry out fully. Grounded on the above factors, in this work, I suggest the suitable ERP model for the small and medium enterprises and the successful importing process of ERP, which is derived from the previous researches made by other masters' thesis. If necessary information and human resources are interchanged pertinently between local education institute and small and medium enterprise, the latter could not only deal with the confronted difficulties successfully inside and outside but attain the goal of being proficient in up-to-minute high technology. Besides, giving the students the opportunity of researching into the practice of the business they have not ever known, local universities could help their students accumulate knowledges and acquire ideas which could not be achieved in pure academic studies. When the above-mentioned procedure is over, the students might get the intellectual faculty to ponder on the future more concretely and enter a profession more carefully. In the result, we would raise up the percentage of the employment among the graduates. And active participation of university professors is the last important factor that assists the small and medium enterprises for introducing ERP system successfully. Their scholarly attainments play an important role in strengthening local economy and make the business competitiveness balanced between the capital and the local economy.