• Applied Chemistry for Engineering
• /
• v.3 no.3
• /
• pp.482-490
• /
• 1992

2,5-dimethoxy-2,5-dihydrofurfuryl alcohol was electrosynthesized from furfuryl alcohol in methanol solution by using three kinds of metal oxide anode. The electrods were prepared by the following process : Thin layer of semiconducting material such as tin(IV)oxide and antimony(III)oxide was made on the titanium base metal in an electric furnace. The titanium metal block with the layer was coated with ${\alpha}-PbO_2$, ${\beta}-PbO_2$, and $MnO_2$ in each electrolytes by anodic deposition, respectively. The lead dioxide electrodes showed better anti-corrosive property than the manganase dioxide electrode. The yield of the product was 92% which is almost the same as the one with conventional platinum electrodes.

• Journal of the Korean Ceramic Society
• /
• v.46 no.6
• /
• pp.708-712
• /
• 2009

ITO films were achieved by sintering at $500{\sim}550{^{\circ}C}$. This was possible by inducing a seeding effect on an ITO sol by producing crystalline ITO nanoparticles in situ during heat treatment. Two kinds of ITO sols (named ITO-A and ITO-B) were prepared at 2.0 wt% from indium acetate and tin(IV) chloride in different mixed solvents. The ITO-A sol showed a high degree of crystallinity of ITO without any detectable Sn$O_2$ on XRD at $350{^{\circ}C}$/1 h, but the ITO-B sol showed a small amount of Sn$O_2$ even after annealing at $600{^{\circ}C}$/1 h. The 10 wt% ITO-A//ITO-B showed the sheet resistance of 3600$\Omega$/□, while the ITO-B sol alone showed 5200 $\Omega$/□ by sintering at $550{^{\circ}C}$ for 30 min. Processing parameters were studied by TG/DSC, XRD, SEM, sheet resistance, and visible transmittance.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.1388-1390
• /
• 2013

Macroporous $SnO_2$ foam was successfully synthesized via a simple soft-chemical route by hybridization between alkylamine and tin(IV) oxide. According to X-ray diffraction (XRD) analysis, the as-prepared $SnO_2$ foam had a highly ordered lamella structure along the crystallographic c-axis, which transformed to a rutile phase after thermal treatment at $300^{\circ}C$. X-ray absorption spectroscopy (XAS) at the Sn K-edge revealed that $SnO_2$ particles in the hybrid material maintained their nanosized structure after hybridization with alkylamine. Scanning electron microscope (SEM) images clearly showed that the as-prepared $SnO_2$ foam had a macroporous structure. This synthetic route can be extended to the development of open frameworks with good electrochemical properties in battery applications.

• Economic and Environmental Geology
• /
• v.19 no.2
• /
• pp.85-96
• /
• 1986

The Bupyeong Silver mine which is located approximately 35km west of Seoul is currently the leading silver producer in Korea. The deposits occur as stockwork deposits hosted in Jurassic pyroclastic rocks. Occurrences of ore deposits and mineral paragenesis suggest a division of mineralization into four stages: Stage I, deposition of iron oxide and base metal sulfides; Stage II, deposition of tin oxide and silverm inerals; stage III, deposition of native silver and other silver minerals; Stage IV, formation of pyrite bearing siderite veinlets, Silver minerals in ore are native silver, argentite, freibergite, pyrargyrite, canfieldite, polybasite, dyscrasite and Ag-Fe-S mineral. The most important silver mineral is native silver among them. Chemical composition of important silver minerals were determined by electron probe microanalyser. Assay, size and modal analyses for floatation products were carried out. In floatation products, relative proportion of native silver for total important silver minerals have following ranges: feed, 64.7 to 74.74 wt.%; A-cleaner concentrate, 80.58 to 98.79 wt.%; and final tailing, 28.12 to 72. 57 wt. %. Average degree of liberation for native silver in feed and A-cleaner concentrate are 60.49% and 77.57% respectively. Negative relationship can be recognized between native silver and argentite in their abundance and behavior in floatation precesses.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.23-29
• /
• 2020

Electrochromic (EC) device is an element whose transmittance is changed by electrical energy. Coloring and decoloring states can be easily controlled and thus used in buildings and automobiles for energy saving. There exist several types of EC devices; EC using electrolytes, polymer dispersed liquid crystal (PDLC), and suspended particle device (SPD) using polarized molecules. However, these devices involve solutions such as electrolytes and liquid crystals, limiting their applications in high temperature environments. In this study, we have studied all-solid-state EC device based on Tin(IV) oxide (SnO₂). A coloring phase is achieved when electrons are accumulated in the ultraviolet (UV)-treated SnO₂ layer, whereas a decoloring mode is obtained when electrons are empty there. The UV treatment of SnO₂ layer brings in a number of localized states in the bandgap, which traps electrons near the conduction band. The SnO₂-based EC device shows a transmittance of 70.7% in the decoloring mode and 41% in the coloring mode at a voltage of 2.5 V. We have achieved a transmittance change as large as 29.7% at the wavelength of 550 nm. It also exhibits fast and stable driving characteristics, which have been demonstrated by the cyclic experiments of coloration and decoloration. It has also showed the memory effects induced by the insulating layer of titanium dioxide (TiO₂) and silicone (Si).