• 제목/요약/키워드: Timing phase

검색결과 373건 처리시간 0.022초

Design of 1.5V-3GHz CMOS multi-chained two stage VCO

  • Yu, Hwa-Yeal;Oh, Se-Hoon;Han, Yun-Chol;Yoon, Kwang-Sub
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 ITC-CSCC -2
    • /
    • pp.969-972
    • /
    • 2000
  • This paper proposes 1.5V-3GHz CMOS PLL with a new delay cell for operating in high frequency and multi chained two stage VCO to improve phase noise performance. The proposed multi-chained architecture is able to reduce a timing jitter or a transition spacing and the newly VCO is operating in high frequency. The PFD circuit designed to prevent fluctuation of charge pump circuit under the locking condition. Simulation results show that the tuning range of proposed VCO is wide at 1.8GHz-3.2Ghz and power dissipation is 0.6mW.

  • PDF

Linear Combination Analysis Using GPS Data

  • Park, Un-Yong;Lee, Jae-One;Lee, Dong-Rak;Hong, Jung-Soo
    • Korean Journal of Geomatics
    • /
    • 제4권2호
    • /
    • pp.47-52
    • /
    • 2004
  • We can process and compute the position, velocity and time by satellite signals of GPS. The signals are used to compute positioning of three dimensions and timing offset of the receiver clock when we can track the tour satellite signals at least. One of the specified aims is to use less expensive single frequency code/carrier phase GPS receivers, which are typically around half the price of dual frequency receivers. In the study, the author analyzed the accuracy and applicability of frequence linear combination using triangulation points evaluated distance limitation.

  • PDF

디지틀 셀룰러 이동통신을 위한 동기 부호 설계 (Synchronization Sequency Design for Digital Cellular Mobile Communications)

  • 한영일
    • 한국통신학회논문지
    • /
    • 제25권10A호
    • /
    • pp.1480-1485
    • /
    • 2000
  • 본 논문은 디지틀 셀룰러 이동전화를 위한 효과적인 동기시퀀스 설계에 대하여 기술하였다. 논문에서 연구된 동기시퀀스의 종류는 시프트 되지 않은 시퀀스와 가운데로 지연 시프트된 시퀀스에서 극성이 반대이고 크기가 같은 두 개의 피크값을 갖고, 그 외 다른 모든 지연에서 가장 낮은 자기상관함수값을 갖는다. 이들 동기시퀀스들은 동기 타이밍을 이중점검하고 동기탐색시간을 줄이기 위해서 이용될 수 있다.

  • PDF

코팅횟수에 따른 PZT세라믹의 구조적 특성 (The Structural properties of PZT ceramic with preparation coating timing)

  • 강정민;조현무;이성갑;배선기
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
    • /
    • pp.64-66
    • /
    • 2004
  • $Pb(Zr_{0.3},Ti_{0.7})O_3$, $Pb(Zr_{0.3},Ti_{0.3})O_3$ powders were prepared by the sol-gel method and PZT heterolayered thick films were fabricated by the screen-printing method. The structural properties as a faction of the composition ration were studied. As a result of the differential thermal analysis (DTA), exothermic peak was observed at around $864^{\circ}C$ dne to the formation of the polycrystalline perovskite phase. The PZT heterolayered thick film sintered at $1050^{\circ}C$ for 10min showed the average grain size $1{\sim}1.4{\mu}m$. The average thickness of PZT heterolayered thick films, obained by $3{\sim}6times$ of screen-printing, was approximately $60{\sim}110{\mu}m$.

  • PDF

X-대역 2차원 위상배열안테나 빔조향 시스템 개발 (The Development of a Beam Steering System for X-band 2-D Phased Array Antenna)

  • 김두수
    • 한국군사과학기술학회지
    • /
    • 제11권4호
    • /
    • pp.92-98
    • /
    • 2008
  • A beam steering system of X-band 2-D phased array antenna for radar application is developed. The beam steering system consists of real-time command generator, beam steering unit, control PCB of array module and power supply. It plays a role of beam steering and on-line check of phased array antenna. The performance of beam steering system is verified with pulse timing of current control in phase shifters and measurement of far-field of phased array antenna. The developed beam steering system offers basic technology to develop full-scale beam steering system of multi-function radar.

타이밍 클릭 복원 회로에 사용된 PLL의 최적 파라미터 결정 (Optimum Parameter Determination of PLL Used in Timing Clock Recovery Circuit)

  • 류흥균;안수길
    • 대한전자공학회논문지
    • /
    • 제24권3호
    • /
    • pp.376-380
    • /
    • 1987
  • The closed-loop transfer function of 2-nd order PLL (phase-looked loop)of which loop filter has active-lag 1-st order is found. Considering the three criteria of system performance: the transient response time of the circuit, noise bandwidth by the linear analysis and stability which uses root-locus method, the optimum value of damping factor is 1.0 and the natural frequency which depends upon the signal frequency can be determined after consideration of the trade-off relationship between the transient response time and the noise bandwidth.

  • PDF

Optimal equivalent-time sampling for periodic complex signals with digital down-conversion

  • Kyung-Won Kim;Heon-Kook Kwon;Myung-Don Kim
    • ETRI Journal
    • /
    • 제46권2호
    • /
    • pp.238-249
    • /
    • 2024
  • Equivalent-time sampling can improve measurement or sensing systems because it enables a broader frequency band and higher delay resolution for periodic signals with lower sampling rates than a Nyquist receiver. Meanwhile, a digital down-conversion (DDC) technique can be implemented using a straightforward radio frequency (RF) circuit. It avoids timing skew and in-phase/quadrature gain imbalance instead of requiring a high-speed analog-to-digital converter to sample an intermediate frequency (IF) signal. Therefore, when equivalent-time sampling and DDC techniques are combined, a significant synergy can be achieved. This study provides a parameter design methodology for optimal equivalent-time sampling using DDC.

보행 시 연령에 따른 하지 관절 내 운동학적 협응과 제어 (Coordinated Intra-Limb Relationships and Control in Gait Development Via the Angle-Angle Diagram)

  • 이경옥
    • 한국운동역학회지
    • /
    • 제14권3호
    • /
    • pp.17-35
    • /
    • 2004
  • The purpose of this study is to explain developmental process of gait via angle-angle diagram to understand how coordinated relationships and control change with age. Twenty four female children, from one to five years of age were the test subjects for this study, and their results were compared to a control group consisting of twenty one adult females. The Vicon 370 CCD camera, VCR, video timer, monitor, and audio visual mixer was utilized to graph the gait cycle for all test subjects. Both coordinated Intra-limb relationships, and range of motion and timing according to quadrant were explained through the angle angle diagram. Movement in the sagittal plane showed both coordinated relationships and control earlier than movement in the coronal or transverse plane. In the sagittal plane, hip and Knee coordinated relationships developed first (from one year of age.) Coordinated relationships in the Knee and ankle and hip and ankle developed next, respectively. Both hip and ankle and knee and ankle development were inhibited by the inability of children to completely perform plantar flexion during the swing and initial double limb support phases. Children appeared to compensate for this by extending at their hip joint more than adults during the third phase, final double limb support. In many cases the angle angle diagram for children had a similar shape as adult's angle angle diagram. This shows that children can coordinate their movements at an early age. However, the magnitudes and timing of children's angle angle diagrams still varied greatly from adults, even at five years of age. This indicates that even at this age, children still do not possess full control of their movements.

실시간 제약 조건의 동적/정적 변화를 통한 클록 동기화 문제 해결 (Revisiting Clock Synchronization Problems: Static and Dynamic Constraint Transformation for Correct Timing Enforcement)

  • 유민수;홍성수
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 1998년도 가을 학술발표논문집 Vol.25 No.2 (3)
    • /
    • pp.68-70
    • /
    • 1998
  • 본 논문에서는 클록들을 주기적으로 동기화하는 분산 실시간 시스템에서 주어진 태스크의 시간 제약(timing constraint)을 변환시는 구가지 기법을 제안한다. 전형적인 이산 클록 동기화(discrete clock synchronization)알고리즘은 클록의 값을 순간적으로 보정(correct)하여 클록의 시간이 불연속적으로 진행학 한다. 이러한 시간상의 불연속성은 태스크의 시작제한시간(release time)이나 종료시한(deadline)과 같은 이벤트를 잃어버리거나 다시 발생시키는 오류를 범하게 한다. 클록 시간의 불연속성을 피하기 위해 일반적으로 연속 클록 동기화(continuous clock synchronization) 기법이제안되었지만 소프트웨어적으로 구현되기에는 많은 오버헤드를 유발시키는 문제점이 있다. 이에 따라 연속 클록 동기화는 PLL (Phase-Locked Loop)을 이용한 별도의 하드웨어를 사용하는 것이 보통이다. 본 논문에서는 연속 클록 동기화 기법을 사용하는 대신, 태스크의 시간 제약을 동적으로 변환시키는 DCT (Dynamic Constraint Transformation) 기법을 제안하였다. DCT는 소프트웨어 으로 구현이 가능하여 새로운 하드웨어를 필요로 하지 않으며, 이를 통해 기존의 이산적으로 동기화된 시스템에서 클록 시간의 불연속성에 의한 문제점들을 해결할 수 있다. 또 다른 문제점으로서, 클록의 물리적인 특성으로 인해 동기화된 클록들이 상한된(bounded from the above)오차(skew)를 갖는다는 것이다. 이러한 오차는 지역 클록(local clock)에 대해 만족될 수 있는 임의의 실기간 제약 조건이 전역 클록(global clock)에 대해서는 만족되지 않을 수 있음을 의미한다. 본 논문에서는 이를 위해 먼저 두 가지의 스케줄링 가능성, 지역적 스케줄링 가능서(local schedulability)과 전역적 스케줄링 가능성(global schedulability)을 정의하고, 실시간 제약을 정적으로 변환시키는 SCT (Static Constraint Transformation)기법을 제안하였다. SCT를 통해 지역적으로 스케줄링 가능한 태스크는 전역적으로 스케줄링이 가능하므로, 단지 지역적 스케줄링 가능성만을 검사하면서 스케줄링 문제를 해결할 수 있도록 하였다.

  • PDF

실시간 데이터베이스 시스템에서의 동적 복사 보안 프로토콜 (Dynamic Copy Security Protocol In Real-Time Database Systems)

  • 박수연;이승룡;정병수;승현우
    • 한국정보과학회논문지:소프트웨어및응용
    • /
    • 제26권8호
    • /
    • pp.955-963
    • /
    • 1999
  • 다단계 보안 실시간 데이타베이스 시스템은 데이타베이스의 일관성 유지와 실시간 요구인 마감시간의 만족, 그리고 기밀성을 띤 데이타가 노출될 수 있는 비밀채널(covert-channel)의 방지라는 요구사항을 모두 만족해야 한다. 기존의 SRT-2PL(Secure Real-Time 2 Phase Locking)은 원본과 복사본으로 데이타 객체를 분리시켜 다른 등급간에 불간섭(non-interference)을 유지하여 비밀채널의 방지를 가능하게 하였으나, 복사본이 모든 데이타 객체에 대해 항상 존재하므로 메모리의 낭비가 있을 수 있고, 복사본의 갱신을 위한 갱신 큐의 관리에 따르는 오버헤드와 그에 따른 예측성 결여라는 문제점을 갖고 있다. 이를 개선하기 위하여 본 논문에서는 다단계 보안 실시간 데이타베이스 시스템의 요구사항을 모두 만족하는 동적 복사 프로토콜을 제안한다. 동적 복사 프로토콜은 로킹 기법을 기초로 동작하고, 트랜잭션의 작업에 따라 동적으로 복사본을 생성하고 삭제한다. 모의 실험 결과 제안한 동적 복사 프로토콜은 비밀채널을 방지하고 동적인 복사본의 생성으로 SRT-2PL의 단점인 메모리 낭비를 줄일 수 있으며, 예측성을 높여 마감시간 오류율을 감소시켰다.Abstract Concurrency control of real-time secure database system must satisfy not only logical data consistency but also timing constraints and security requirements associated with transactions. These conflicting natures between timing constraints and security requirements are often resolved by maintaining several versions(or secondary copies) on the same data items. In this paper, we propose a new lock-based concurrency control protocol, Dynamic Copy Security Protocol, ensuring both two conflicting requirements. Our protocol aims for reducing the storage overhead of maintaining secondary copies and minimizing the processing overhead of update history. Main idea of our protocol is to keep a secondary copy only when it is needed to resolve the conflicting read/write operations in real time secure database systems. For doing this, a secondary copy is dynamically created and removed during a transaction's read/write operations according to our protocol. We have also examined the performance characteristics of our protocol through simulation under different workloads while comparing the existing real time security protocol. The results show that our protocol consumed less storage and decreased the missing deadline transactions.