• Korean Journal of Applied Biomechanics
• /
• v.28 no.2
• /
• pp.93-100
• /
• 2018

Objective: The purpose of this study is to analyze the kinematic characteristics of the national speed skaters in the curve phase of 500-m race. Method: Seven national skaters participated in the study. Race images were acquired using a high - speed camera, and the three-dimensional motion was analyzed. Results: For skaters, whose average velocity in the curve phase is high, the velocity of entry into the straight phase was also fast. The fast skaters showed a larger maximum angle of extension of the knee joints than the relatively slow skaters, and the trunk ROM was smaller. Fast skaters tended to match the timing of the movement of the lower limb with the pelvis, while slow skaters tended to rotate the left pelvis backward. The velocity of the curve phase did not show a clear relationship with stroke time, average trunk angle, and lap time. Conclusion: It is important to skate close to the inner line, keep the trunk ROM below 10 degrees, extend the knee angle to over 160 degrees, and match the movement of the pelvis and lower limb to accelerate in the curve phase. The average velocity of the curves was fast for many athletes, but the competition rankings were low. Therefore, it is possible to improve the performance by optimizing the start technique, the running characteristics of the straight phase, and the physical factors.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.4
• /
• pp.91-101
• /
• 2017

The Okjukdong dune in Daecheong Island attracts national attention because of its unique landscape that is not covered by vegetation. However, there has been little knowledge on the timing of the dune formation, associated wind regime, and conservational strategies. In this study, we used OSL dating and grain size analyses to reveal the history of the dune development. In addition, we analyzed the wind regime in the dunefield which is surrounded by artificial coastal forest. The fine sand at Okjukdong underlain by a colluvial gravel layer indicates that the dune has been developed since at least 5 ka. Aeolian sands were found to be deposited around 700 years ago. The dunefield appears to have been severely eroded 30~60 years ago. The dune landscape has been destroyed after constructing a windbreak forest around the dunefield. The sand seems to be moving south and north with the season.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.9
• /
• pp.90-96
• /
• 2021

As real-time data of factories can be collected using various sensors, the adaptation of intelligent unmanned processing systems is spreading via the establishment of smart factories. In intelligent unmanned processing systems, data are collected in real time using sensors. The equipment is controlled by predicting future situations using the collected data. Particularly, a technology for the prediction of tool wear and for determining the exact timing of tool replacement is needed to prevent defected or unprocessed products due to tool breakage or tool wear. Directly measuring the tool wear in real time is difficult during the cutting process in milling. Therefore, tool wear should be predicted indirectly by analyzing the cutting load of the main spindle, current, vibration, noise, etc. In this study, data from the current and acceleration sensors; displacement data along the X, Y, and Z axes; tool wear value, and shape change data observed using Newroview were collected from the high-speed, two-edge, flat-end mill machining process of SKD11 steel. The support vector machine technique (machine learning technique) was applied to predict the amount of tool wear using the aforementioned data. Additionally, the prediction accuracies of all kernels were compared.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.309-316
• /
• 2018

In this study, we propose a 3D virtual reality based presentation training system to help implement the virtual presentation environment, such as the real world, to present it confidently in the real world. The proposed system provided a realistic and highly engaging presentation and interview environment by analyzing the speakers' voice and behavior in real time to be reflected in the audience of the virtual space. Using HMD and VR Controller that become 6DOF Tracking, the presenter can change the timing and interaction of the virtual space using Kinect, and the virtual space can be changed to various settings set by the user. The presenter will look at presentation files and scripts displayed in separate views within the virtual space to understand the content and master the presentation.

• Journal of Fashion Business
• /
• v.23 no.4
• /
• pp.24-37
• /
• 2019

This study focused on the fashion designer brand 'Alexander McQueen' to determine how butterflies are used in modern fashion through the sensibilities of certain designers. To this end, both a literature review and empirical research were conducted. First, we examined the origin of the word and appearance characteristics of butterflies based on prior research and a book, and also surveyed the tendencies used by the fashion designer brand Alexander McQueen. Second, out of 239 items announced by the fashion designer brand "Alexander McQueen" RTW (Ready to Wear) ranging from the S/S Collection in 2008 to the 2018-9 F/W collection, 73 pieces deemed to be fashion using butterfly images were collected through www.samsung.net and www.firstview.com, then analyzed based on timing and aesthetic characteristics. Results. The analysis by time period was divided into fantasy, handicraft, mix and match, and aesthetic characteristics shown in the order of compromise beauty, rhythmical beauty, and voluptuous beauty. The purpose of this study was to determine how butterflies are expressed in fashion based on the sensibility of a specific designer in modern fashion, the fashion designer brand 'Alexander McQueen'. Based on the results of this study, we hope that the information presented herein on fashion of natural images will serve as a basic material for similar research or design ideas as an example of designs based on butterfly images.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.97-102
• /
• 2019

The GNSS(Global Navigation Satellite System) provides important information such as Position and Navigation, Timing(PNT) to various weapon systems in the military. as a result, applications that employ satellite navigation systems are increasing. therefore, a number of studies have been conducted to deceive the weapon systems that employ GNSS. GNSS spoofing denotes the transmission of counterfeit GNSS-like signals with the intention to produce a false position and time within the victim receiver. In order to deceive the victim receiver, spoofing signal should be synchronized with GNSS signal in doppler frequency and code phase, etc. In this paper, Civilian GPS L1 C/A spoofing signals have been evaluated and analyzed by SDR receiver.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.12
• /
• pp.5654-5668
• /
• 2018

Driven by security and real-time demands of Internet of Things (IoT), the timing of fog computing and edge computing have gradually come into place. Gateways bear more nearby computing, storage, analysis and as an intelligent broker of the whole computing lifecycle in between local devices and the remote cloud. In fog computing, the edge broker requires X-aware capabilities that combines software programmability, stream processing, hardware optimization and various connectivity to deal with such as security, data abstraction, network latency, service classification and workload allocation strategy. The prosperous of Field Programmable Gate Array (FPGA) pushes the possibility of gateway capabilities further landed. In this paper, we propose a software-defined gateway (SDG) scheme for fog computing paradigm termed as Fog Computing Zero-Knowledge Gateway that strengthens data protection and resilience merits designed for industrial internet of things or highly privacy concerned hybrid cloud scenarios. It is a proxy for fog nodes and able to integrate with existing commodity gateways. The contribution is that it converts Privacy-Enhancing Technologies rules into provable statements without knowing original sensitive data and guarantees privacy rules applied to the sensitive data before being propagated while preventing potential leakage threats. Some logical functions can be offloaded to any programmable micro-controller embedded to achieve higher computing efficiency.

• Journal of Environmental Science International
• /
• v.30 no.5
• /
• pp.369-378
• /
• 2021

In this study, we investigated the effects of indole on biofilm formation inhibition in Pantoea agglomerans (P. agglomerans). In the biofilm growth assay, indole inhibited biofilm formation across all the growth time. Depending on biofilm growth stage, indole exhibited biofilm inhibition and anti-bacterial effects on planktonic cells. Through the analysis of the proportion rate between biofilm and Colony Forming Units (CFU) and inhibition rate of indole, we confirmed that depending on the biofilm stage of P. agglomerans, indole treatment timing was more important than the treatment duration. By comparing gene expression rates through rt-qPCR P.agglomerans affected by indole was found to significantly change quorum sensing (pagI/R) and indole transportation (bssS) gene expressions. Throughout all, indole exhibited both antimicrobial and anti-biofilm effects on P. agglomerans. In addition, we confirmed the anti-biofilm effects of indole on mature biofilm. In conclusion, indole as a signal molecule, can exhibit anti-biofilm effects through bacterial quorum sensing inhibition and indole affects. Therefore, indole can regulate biofilm bacteria especially gram-negative opportunistic pathogens.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.8
• /
• pp.111-122
• /
• 2019

The purpose of this study was to understand the timing of Gentrification by the study through the analysis of licensing data for food service businesses under the correlation with regional policies and systems. In addition, by analyzing the change in location patterns of the food service business in the district unit plan zones, the cause, development patterns and regional differences were identified. Starting with the Seoul hanok declaration in 2008, the approval of the food service business began to increase, and the floating population increased with the restoration of the Suseong Valley in 2012, and the concentration of food service business increased significantly on the waterway (Jahamun-ro 7-gil). Since the designation of Ikseon-dong as an urban environment readjustment zone in 2004, the approval of new food service business has been very low until around 2014, when the cooperative establishment committee is dissolved, and as the district unit plan for the preservation of hanok and regional management is being established, the number of new permits has exploded to date and restaurants in hanok conservation zones has been active.

• Journal of the Korean Institute of Rural Architecture
• /
• v.23 no.4
• /
• pp.55-62
• /
• 2021

This study conducted a management system and business analysis related to urban and architecture in local small and medium cities. The current status of the management department of the master plans, which were established based on the laws related to the spatial environment and implemented projects based on them, was analyzed, and the problems were derived. The basic urban master plan of the local government is classified as a hierarchical higher plan than other plans established within the same city, but there was a problem in that the timing of each plan was different. As a problem, the contents of the sub-plan were not included in the upper plan, or the opposite phenomenon occurred. In addition, the management entity of the master plan and sub-projects was different. To solve this problem, it is necessary to form a consistent structure of systematic planning and management subjects. In addition, in the future planning stage, it is necessary to establish a master plan establishment system according to hierarchies. This study is meaningful in that it can be used to establish a master plan establishment system according to hierarchy in the future planning stage and to establish the same management entity as the master plan in the projects stage.