• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.149-151
• /
• 2001

In real-time control system, it is essential to confirm the timing behavior of all tasks because these tasks of real-time controller have to finish their processes within the specified time intervals called a deadline. In order to satisfy this objective, the timing analysis of a real-time system such as a schedulability test must be performed during the system design phase. This paper presents a Matlab toolbox for simulation of real-time control system based on OSEK-OS, which is one of the most widely adopted real-time operating systems in automotive industry. The toolbox allows the user to explore the timely behavior of control algorithms, and to study the interaction between the object of the OSEK-OS, such as task, scheduler and resource etc.

• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.1
• /
• pp.9-15
• /
• 2017

In this paper, results of a jammer detection and localization system operation are given. The system consists of receiver stations, a central tracking station, and a monitoring station and it was developed by our institute in 2014. Through real-time tests, it is confirmed that the developed system has an ability to estimate the location of interference sources with an accuracy of 50 m (CEP) even they was 10 km away. After verification, this system was installed in Incheon International Airport and operating results are being monitored by the airport and our institute continuously. In this year, there were some events that jamming signals were received from North Korea, so the data were analyzed and given here.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.1
• /
• pp.7-13
• /
• 2020

As a countermeasure against the threat of jamming which can disrupt operation of the Global Positioning System (GPS) receivers, various kinds of technique to estimate the Direction-Of-Arrivals (DOAs) of incoming jamming signals have been widely studied, and among them, the MUltiple SIgnal Classification (MUSIC) algorithm is known to provide very high resolution. However, since the previous studies regarding the MUSIC algorithm does not consider the orientation of each antenna element of antenna arrays, there is a possibility that DOA estimation performance degrades in the case of a misaligned antenna array whose antenna elements are not oriented along the same direction. As an effort to solve this problem, there exists a previous work which presents an MUSIC-based method for DOA estimation. However, the error between the real and measured values of each antenna orientation is not taken into consideration. Therefore, in this paper, the effect of the aforementioned error on the DOA estimation performance in the case of a misaligned antenna array is analyzed by simulations.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.7-11
• /
• 2000

본 논문에서는 불완전 동기(Imperfect Synchronization)로 인한 칩 동기 에러(timing errors)와 위상 에러(phase errors)를 고려 하여 비동기(Asynchronous) DS-CDMA 시스템의 성능을 이론적으로 분석하였다. 성능 개선 기법으로는 다단 간섭제거기 (Multistage PIC)와 부분 다단 간섭제거기(Partial Multistage PIC)를 채용하였고 칩 동기 에러와 위상 에러가 두 간섭제거기의 간섭제거능력에 미치는 영향의 정도를 정량적으로 분석하였다. 성능분석 결과로부터 칩 동기 에러와 위상 에러로 인한 1단(no cancellation)에서의 성능 열화가 각 단의 상관기 출력(decision statistic)에 영향을 줌으로써 다단 간섭제거기와 부분 다단 간섭제거기의 성능 개선폭을 감소시켰다. 그렇지만, 불완전 동기에도 불구하고 단(stage) 수가 증가할수록 두 간섭제거기 모두 강한 간섭제거능력을 보였다. 실제 시스템에서는 성능 개선과 구현상의 복잡도를 동시에 고려해야하므로 다단 간섭제거기 보다 구조가 간단하고 계산량이 적은 부분 다단 간섭제거기의 활용도가 높아질 것이 예상된다.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.59-63
• /
• 2020

The antenna arrays are known to be effective for GPS anti-jamming and the performance can be improved further if a dual-polarized antenna array is used. However, when the Minimum Variance Distortionless Response (MVDR) beamformer is used as a signal processing algorithm for the dual-polarized antenna array, the anti-jamming performance can degrade in the presence of errors in the steering vector that is a key factor of the MVDR beamformer. Therefore, in this paper, the effect of the steering vector error on the anti-jamming performance of the dual-polarized antenna array is analyzed by simulations and the result is compared to that of the single-polarized antenna array.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.2
• /
• pp.271-277
• /
• 1989

The purpose of this preliminary report was to describe the operating procedure of T-scan system and to identify the location, timing and force of occlusal contact in patient with normal occlusion using computerized T-scan system. From the preliminary observation , the author obtained the following results. 1. T-scan system displayed 2 dimensional and 3 dimensional description of occlusion: contact locations, timing (sequence) and forces of occlusal contacts. 2. The T-scan sensor was the most important part of the T-scan system. 3. The data of T-scan system cannot be stored in computer diskett. 4. The T-scan system is thought to be the most effective system to detect occlusal contacts and can be applied to the followings : occlusal diagnosis, occlusal equilibration, crown and bridge restorative procedures, denture adjustment, implant procedures, splint adjustment, laboratory procedures, periodontal treatment, orthodontics, TMJ treatment and patient education etc.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.5 no.2
• /
• pp.102-107
• /
• 2005

This paper presents the comparison and performance analysis for CPL and CMOS based designs. We have developed the Verilog-HDL codes for the proposed designs and simulated them using ModelSim for verifying the logical correctness and the timing properties of the proposed designs. The proposed designs are then analyzed at the layout level using LASI. The layouts of the proposed designs are simulated in Winspice for timing and power characteristics. The result shows that the new circuits presented consistently consume less power than the conventional design of the same circuits. It can also be seen that these circuits have the lesser propagation delay and thus higher speed than the conventional designs.

• Journal of the Korean Society of Combustion
• /
• v.8 no.3
• /
• pp.31-37
• /
• 2003

The objective of this work is to investigate the effect of swirl, injection pressure and pilot injection on D.I.Diesel combustion by using a transparent engine system. The test engine is equipped with common rail injection system to obtain high pressure and to control injection timing and duration. In this study, the combustion analysis and steady flow test were conducted to estimate the heat release rate from in-cylinder pressure and pilot injection was investigated by using LII technique. As the results, high injection pressure was found to shorten ignition delay as well as enhance peak pressure and heat release rate was greatly affected by injection timing and pilot injection. In addition, the results showed that the period of soot formation corresponded to the diffusion flame.

• Journal of ILASS-Korea
• /
• v.23 no.1
• /
• pp.1-8
• /
• 2018

In this study, the effects of variation in cam phasing and valve lift of exhaust valves by using Cam-in-Cam system on combustion and emission characteristics for diesel engine were investigated under GT-POWER simulation environment. This paper showed analytic result of combustion characteristics and diesel exhaust valve's control with GT-Power 1-D detail model. As a result, it was found that volumetric efficiency and IMEP were decreased as the exhaust valve opening and closing timing is advanced due to its internal EGR effects. Also, it was found that NOx emission were decreased as EVC timing was retarded. These show that the retarding the exhaust valve closing and opening while keeping the duration at constant can be effective for controlling AFR and mixing rate in diffusion combustion of diesel engine.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.922-924
• /
• 1995

The modeling of accurate timing in storage elements of ASIC cell library was studied. The propagation delay time of clock signal affects the critical time and this can cause malfunction in the chip designed in synchronous. In this paper, an analysis on the effect of input slope of clock signal in timing modeling were carried out. For the first time, in ASIC design, the design guides that can be used in both $0.6{\mu}M$ and $0.8{\mu}m$ design rule were offered, reducing the run time of SPICE and the time of cell library development.