• KDI Journal of Economic Policy
• /
• v.28 no.2
• /
• pp.51-96
• /
• 2006

Two conditions should be satisfied if fiscal policy is to stabilize economic cycles; proper policy timing and significant policy effect. This paper evaluates whether the policy timing has been proper in Korea by investigating the correlation between fiscal policy stance and economic conditions. We first calculate quarterly FIs (Fiscal Impulse) using the estimated potential GDP and fiscal balance data. Based on these indices, we 1) analyze how FIs respond to the economic conditions summarized in GDP gap through regression analysis, 2) compare average FIs in expansionary and recessionary periods according to the NSO's economic cycles, 3) evaluate fiscal policy maker's perception of economic conditions and its intention by reviewing the budget proposals. Although regression analysis shows that overall fiscal policy, especially expenditure side, has properly responded to economic conditions, average FIs do not show the significant difference between expansionary and recessionary periods. It is inconclusive whether the fiscal policy timing has been proper. Budget proposals show that actual fiscal policy stance has been sometimes inconsistent with the policy intention, which implies that it is hard to utilize fiscal policy actively to stabilize the economy.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.8 s.350
• /
• pp.35-43
• /
• 2006

In the paper, we propose a new method for power optimization that uses path balancing based on stochastic estimation of glitch in Statistical Static Timing Analysis (SSTA). The proposed method estimates the probability of glitch occurrence using tightness probability of each node in timing graph. In addition, we propose efficient gate sizing technique for glitch reduction using accurate calculation of sizing effect in delay considering probability of glitch occurrence. The efficiency of proposed method has been verified on ISCAS85 benchmark circuits with $0.16{\mu}m$ model parameters. Experimental results show up to 8.6% of accuracy improvement in glitch estimation and 9.5% of optimization improvement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.1
• /
• pp.47-55
• /
• 1994

This paper investigates the performance analysis of the packet DS/SS receiver with a PJED(phase-jump error detector) using the block signal processing(BSP) methods. The conventional packet DS/SS block receiver has a high probability of mistaking the phase-jump detection, which causes the frequency estimation error. The conventional receiver uses a Matched-Pulse Timing Extractor which has a complicated structure. The proposed packet DS/SS block receiver with the PJED which uses libearity of the phase has little probability of mistaking the phase-jump detection. The proposed Matched Pulse Timing Extractor gas the more simple structure but obtains the same performance on the exact matched-pluse timing as the conventional one does. The simulation results show that the proposed receiver gives about 2dB improvement in the BER compared with the conventional receiver.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.2
• /
• pp.133-139
• /
• 2017

The timing chain system, which is a typical power transmission technology applied to a vehicle, has been widely used by the automotive industry because it is normally designed to last a car's lifetime. However, the timing chain system may cause some problems due to the shape of the chains and the polygonal behavior on contact between the chain and the sprocket. In addition, noise and vibration caused by transmission error are the most typical problems encountered by major automotive manufacturers and they are considered as the main source of customer complaint. The initial tension of the chain-sprocket system is thought to be the main cause of transmission error, and it is regarded as the source of engine vibration and noise. The initial tension of the chain system should be controlled carefully since a low initial tension can cause twisting, which may lead to a system malfunction, while a high initial tension can reduce the service life due to a worn down contact surface. In this paper, the kinematic analysis model is generated with various initial tensions, which are controlled by changing the shape of the fixed guide with the largest contact surface with chain. The results showed that the transmission error was minimized on a particular range of initial tension, and the tendency showed that the error changed with a higher sensitivity at a lower initial tension.

• Speech Sciences
• /
• v.1
• /
• pp.153-200
• /
• 1997

In languages such as Japanese, it is very common to observe that short peripheral vowel are completely voiceless when surrounded by voiceless consonants. This phenomenon has been known as Montreal French, Shanghai Chinese, Greek, and Korean. Traditionally this phenomenon has been described as a phonological rule that either categorically deletes the vowel or changes the [+voice] feature of the vowel to [-voice]. This analysis was supported by Sawashima (1971) and Hirose (1971)'s observation that there are two distinct EMG patterns for voiced and devoiced vowel in Japanese. Close examination of the phonetic evidence based on acoustic data, however, shows that these phonological characterizations are not tenable (Jun & Beckman 1993, 1994). In this paper, we examined the vowel devoicing phenomenon in Korean using data from ENG fiberscopic and acoustic recorders of 100 sentences produced by one Korean speaker. The results show that there is variability in the 'degree of devoicing' in both acoustic and EMG signals, and in the patterns of glottal closing and opening across different devoiced tokens. There seems to be no categorical difference between devoiced and voiced tokens, for either EMG activity events or glottal patterns. All of these observations support the notion that vowel devoicing in Korean can not be described as the result of the application of a phonological rule. Rather, devoicing seems to be a highly variable 'phonetic' process, a more or less subtle variation in the specification of such phonetic metrics as degree and timing of glottal opening, or of associated subglottal pressure or intra-oral airflow associated with concurrent tone and stricture specifications. Some of token-pair comparisons are amenable to an explanation in terms of gestural overlap and undershoot. However, the effect of gestural timing on vocal fold state seems to be a highly nonlinear function of the interaction among specifications for the relative timing of glottal adduction and abduction gestures, of the amplitudes of the overlapped gestures, of aerodynamic conditions created by concurrent oral tonal gestures, and so on. In summary, to understand devoicing, it will be necessary to examine its effect on phonetic representation of events in many parts of the vocal tracts, and at many stages of the speech chain between the motor intent and the acoustic signal that reaches the hearer's ear.

• Korea Journal of Hospital Management
• /
• v.22 no.4
• /
• pp.50-60
• /
• 2017

Purposes: The purpose of this study was to identify the preferred types of the hospital reservation cancellation management to help reduce the reservation cancellations. Methodology: This study sampled 327 outpatients or their guardians who had reserved a university hospital and a general hospital located in the southwestern part of Seoul, and the responses from 300 of them were used for the final analysis. The subjects' preferences of reservation cancellation management types were analyzed in reference to their demographic variables. The timing and frequency of pre-notification preferred by the subjects were examined. A multidimensional scaling methods and correspondence analysis was used to identify preference for management methods of no-show and type of reservation guide. Findings: As a result, 77.3% of the respondents were perceived that the reservation cancellation was a habit. The most preferred method of managing the reservation cancellation would be refusal to refund the reservation deposit (61.7%), followed by payment for cancellation (16.0%), limit of future reservations (16.0%) and penalty (6.3%) in their order. 186 of the subjects (62.0%) preferred the texting for prevention of reservation cancellations, and 102 of the subjects (34.0%) preferred the phone calls. The preferred timing and frequency of the SMS were twice 3 days before, once a day before and three times 7 days before, while the preferred timing and frequency of phone call was once a day before. Practical Implications: The no-show rate can be improved by enhancing SMS pre-notification and by improving afterwards telephone counseling. For other factors, it needs to study on the service differentiation with the characteristics of each patient group.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.139-143
• /
• 2018

Arduino, based on open source hardware, is used in many IoT devices, and IoT devices require multitasking for various inputs and outputs. Among the several methods used for multitasking based on Arduino, we compare three methods: Timing Call by using millis(), Simple Timer library method, and Timer library method. In order to measure the execution error caused by measurement and time delay of each method, two situations are created and analyzed. In the first case, 10 random tasks of a certain size are generated to measure the time delay of each method. In the second situation, 10 random tasks of a certain size are generated to compare execution errors caused by the time lag of the Timer library. In the first case, the millis() timing call method and the Simple Timer library method have a similar time delay and the Timer library method has more time delay. In the second situation, an execution error occurred in which small-size tasks were not called back at the correct timing due to the time delay.

• Korean Journal of Applied Biomechanics
• /
• v.32 no.2
• /
• pp.43-48
• /
• 2022

Objective: The purpose of this study was to verify the effectiveness among simulating ski jumping trainings by comparing with actual ski jump. Method: Three healthy youth national athletes were recruited for this study (age: 13.70 ± 0.9 yrs, height: 169.30 ± 0.9 cm, jumping caree: 5.3 ± 0.9 yrs). Participants were asked to performed ski jumping with 3 simulating and one actual situation. A 3-dimensional motion analysis with 5 channels of EMG was performed in this study. Muscle activations of Rectus Femoris [RF], Tibialis Anterior [TA], Thoracis [TH], Gluteus maximus [GM], and Gastronemius [GL] were achieved with sampling rate of 2,000 Hz during each jump. Results: In the case of S1 in the actual jumping motion, the deviation of the muscle activity peak did not appear each trial, and the jump timing was consistent. For S2, the timing of the muscles peak activation which can maintain the posture of the upper body and ankles appeared at the beginning. In the case of S3, the part maintaining the ankle posture at the beginning appeared, but it could be expected that it would progress in the vertical direction due to the activation of GL at the time of jumping. Conclusion: The muscle activation peak before the take-off point showed a different pattern for each athlete, and individual differences were large. In addition, it was attempted to confirm the actual jump with simulation jump, and it was found that not only the difference in patterns but also the fluctuations in the timing of each muscle activation peak were large.

• Journal of Industrial Convergence
• /
• v.21 no.1
• /
• pp.87-93
• /
• 2023

Determining the timing of buying and selling in stock investment is one of the most important factors to increase the return on stock investment. Buying low and selling high makes a profit, but buying high and selling low makes a loss. The price is determined by the quantity of buying and selling, which determines the price of a stock, and buying and selling is also related to corporate performance and economic indicators. The fear and greed index provided by CNN uses seven factors, and by assigning weights to each element, the weighted average defined as greed and fear is calculated on a scale between 0 and 100 and published every day. When the index is close to 0, the stock market sentiment is fearful, and when the index is close to 100, it is greedy. Therefore, we analyze the trading criteria that generate the maximum return when buying and selling the US S&P 500 index according to CNN fear and greed index, suggesting the optimal buying and selling timing to suggest a way to increase the return on stock investment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.204-205
• /
• 2020

Construction Standard Unit Price is the unit price calculated based on the market price for work items in construction projects that have already been conducted. It is used as basic data for calculating the budget price of public construction projects. In the Construction Standard Unit Price Book implemented in the second half of 2020, there are 1,810 types of unit prices. Since 2017, 100-150 construction standard unit prices have been revised semiannually (on January 1 and July 1 of each year) through Construction Site Surveys. Other work items have been set based on the rate of inflation during the corresponding period. Later in 2020, this procedure was changed, with on-site survey period extended to one year to strengthen the construction standard unit price investigation. The revisions previous announced during the second half of the year were changed only to reflect the price inflation rates. With such changes in the revisions to construction standard unit prices, one important issue that was raised: The timing of announcing the revisions during the second half of the year (reflecting the price inflation rates). The market unit wage, which is the unit price standard of labor cost that takes up a large part of the construction cost, is announced in January and September. The figures announced in September is reflected on the construction standard unit price four months later in January, but the market unit wage announced in January is reflected only six months after in July, which causes a timing issue. As such, the current study analyzed problems rising from the changed timing of the announcements of the construction standard unit price during the second half of the year, in addition to analyzing their impact on public construction projects.