• 제목/요약/키워드: Timing Error

검색결과 381건 처리시간 0.025초

Harnessing Integration of Symbol-Rate Equalizer and Timing Recovery for Enhanced Stability

  • Adrian Francisco Ramirez;Felipe Pasquevich;Graciela Corral Briones
    • Journal of information and communication convergence engineering
    • /
    • 제22권2호
    • /
    • pp.89-97
    • /
    • 2024
  • This research conducted a comparative analysis of two communication systems. The first system utilizes a conventional series configuration consisting of a symbol-rate least mean square (LMS) equalizer followed by a timing recovery loop. The second system introduces an innovative approach that integrates a symbol-rate LMS equalizer and a timing recovery component within a single loop, allowing mutual feedback between the two blocks. In this integrated system, the equalizer also provides timing error information, thereby eliminating the requirement for a separate threshold error detector. This study examines the performance curves of both system configurations. The simulation results revealed that the integrated system may offer improved stability in terms of multiple transmission challenges, including phase and frequency offsets and intersymbol interference. Further analysis and discussion highlight the significant insights and implications of the proposed architecture. Overall, the present findings provide an alternative perspective on the joint implementation of equalization and timing recovery in communication systems.

DTV시스템에서 평균 파워 조절기와 추정 옵셋 변화율에 따른 대역폭 조절 필터를 이용한 동기 성능 최적화 (Synchronization performance optimization using adaptive bandwidth filter and average power controller over DTV system)

  • 남완주;이성준;손성환;김재명
    • 대한전자공학회논문지SP
    • /
    • 제44권5호
    • /
    • pp.45-53
    • /
    • 2007
  • DTV수신기에서 송신신호를 완벽하게 복원하기 위해서는 채널의 영향으로 인해 파일롯의 위치가 바뀌고 위상이 틀어지는 것을 보상해주는 반송파 주파수 동기와 샘플링 클락 주파수와의 위상오차로 인해 발생하는 샘플링 타이밍 오차를 보상하는 심볼 타이밍 동기가 모두 획득되어야 한다. 심볼 타이밍 동기부는 일반적으로 다중레벨을 가지는 신호에 사용되는 가드너(Gardner)방법을 사용한다. 가드너 방법은 매 심볼마다 타이밍 에러성분을 추출하므로 다중경로 채널에서 타이밍동기를 추적하면서 유지하는데 유리한 방식이다. 본 논문에서는 가드너 방법에서 에러를 검출하기 위해 사용되는 가드너 타이밍 에러 검출기(Timing Error Detector)가 수신파워레벨이 기준 파워레벨에서 크게 벗어날 경우 동기를 획득할 수 없는 문제점을 해결하기 위해 1단계로 가드너 타이밍 에러 검출기 블록 앞에 수신파워레벨을 계산하여 보정하는 블록을 추가하여 수신파워레벨을 보정한다. 2단계로 반송파 주파수동기와 심볼타이밍동기에 사용되는 PLL(Phase Locked Loop)회로의 빠른 동기 획득과 동기 획득 후 지터량을 줄이기 위하여 루프필터의 출력 값의 평균을 이용하여 옵셋량을 추정하여 추정된 옵셋의 변화율에 따라 단계적 대역폭을 가지는 적응적인 루프필터를 반송파 주파수 동기 회로와 심볼 타이밍동기 회로에 적용함으로써 최적의 동기성능을 얻는다.

멀티패스 지연프로필의 각 수신지연파의 선두에서 OFDM 신호의 심벌 동기타이밍으로의 검출확률 (Detection Probability as a Symbol Synchronization Timing at the Lead of Each Received Delay OFDM Signal in Multipath Delay Profile)

  • 주창복;박동호
    • 대한전자공학회논문지TC
    • /
    • 제44권2호
    • /
    • pp.55-61
    • /
    • 2007
  • 본 논문에서는 곱의 상관방식과 차분상관방식의 OFDM 심벌 동기타이밍방식에 있어서 멀티패스 채널 지연프로필의 각 수신지연파에서 OFDM 심벌 동기타이밍으로 검출될 확률식을 나타내 보인다. 여러 가지 지연확산의 채널들에 대해 행해본 컴퓨터시뮬레이션의 결과 상관의 동기타이밍 검출방식에서는 진폭이 가장 큰 지연파의 선두에서 동기타이밍을 취할 확률이 높게 나타나는데 대하여 차분방식에서는 언제나 제 1수신지연파의 선두에서 동기타이밍을 취할 확률이 높게 나타나는 특성을 보여준다. 이러한 결과를 통하여 본 논문에서는 채널의 지연확산 길이에 관계없이 OFDM신호의 동기타이밍을 0점과 -1점 심벌 동기타이밍을 취하는 것에서 BER의 성능차이를 보여준다.

내장형 전류 감지회로를 이용한 타이밍 오류 검출기 설계 (Design of a Timing Error Detector Using Built-In current Sensor)

  • 강장희;정한철;곽철호;김정범
    • 전기전자학회논문지
    • /
    • 제8권1호
    • /
    • pp.12-21
    • /
    • 2004
  • 오류제어는 많은 전자 시스템의 주요한 관심사이다. 시스템 동작에 영향을 미치는 대부분의 고장은 회로에서 발생하는 타이밍 위반의 결과로 나타나는 비정상적인 신호지연으로 인한 것이며, 이는 주로 과도고장에 의해 발생한다. 본 논문에서는 CMOS 회로의 동작 중에 타이밍 오류를 검출하는 회로를 설계하였다. 타이밍 오류 검출기는 클럭에 의해 제어되는 시스템의 준비시간 및 대기시간의 위반에 대한 오류를 검출할 수 있다. 설계한 회로는 데이터의 입력이 클럭 천이지점에서 변화할 때 과도전류를 측정하여 오류 검출기의 전류 감지회로에서 발생시킨 기준전류와 비교함으로써 오류의 발생 여부를 확인 할 수 있다. 이러한 방법은 클럭에 의해 동작하는 시스템의 준비시간 및 대기시간의 위반에 따른 오류를 효과적으로 검출할 수 있음을 보여준다. 이 회로는 2.5V 공급전압의 $0.25{\mu}m$ CMOS 기술을 이용하여 구현하였으며, HSPICE로 시뮬레이션하여 정당성 및 효율성을 검증하였다.

  • PDF

Non-data Aided Timing Phase Recovery Scheme for Digital Equalization of Chromatic Dispersion and Polarization Mode Dispersion

  • Park, Jang-Woo;Chung, Won-Zoo;Park, Jong-Sun;Kim, Sung-Chul
    • Journal of the Optical Society of Korea
    • /
    • 제13권3호
    • /
    • pp.367-372
    • /
    • 2009
  • In this paper we propose an electronic domain timing phase selection scheme for the optical communication systems suffering from inter-symbol-interference (ISI) distortion due to chromatic dispersion (CD) or polarization mode dispersion (PMD). In the presence of CD/PMD a proper timing phase selection is important for discrete time domain equalizers, since different timing phases produce different nonlinear ISI channels of different severity. The proposed timing phase recovery scheme based on dispersion minimization (DM) practically approximates the optimal minimum mean squared error (MMSE) timing phase without training signals which reduces overall throughput substantially, especially in time-varying channels such as PMD. The simulation results show that the proposed DM timing agrees with MMSE timing phase, under proper normalization of the received signals, for various dispersion and OSNR.

Analyzing Characteristics of GPS Dual-frequency SPP Techniques by Introducing the L2C Signal

  • Seonghyeon Yun;Hungkyu Lee
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제12권2호
    • /
    • pp.157-166
    • /
    • 2023
  • Several experiments were carried out to analyze the impact of the modernized Global Positioning System (GPS) L2C signal on pseudorange-based point positioning. Three dual-frequency positioning algorithms, ionosphere-free linear combination, ionospheric error estimation, and simple integration, were used, and the results were compared with those of Standard Point Positioning (SPP). An analysis was conducted to determine the characteristics of each dual-frequency positioning method, the impact of the magnitude of ionospheric error, and receiver grade. Ionosphere-free and ionospheric error estimation methods can provide improved positioning accuracy relative to SPP because they are able to significantly reduce the ionospheric error. However, this result was possible only when the ionospheric error reduction effect was greater than the disadvantage of these dual-frequency positioning algorithms such as the increment of multipath and noise, impact of uncertainty of unknown parameter estimation. The RMSE of the simple integration algorithm was larger than that of SPP, because of the remaining ionospheric error. Even though the receiver grade was different, similar results were observed.

실내 무선 DS-CDMA 방식에서 다중경로 페이딩 영향을 고려한 DLL 설계와 성능평가 (DLL Design and Performance Evaluation in Indoor Wireless DS-CDMA System under the Multipath Fading Effects)

  • 임성준;유호진;유흥균
    • 한국음향학회지
    • /
    • 제16권3호
    • /
    • pp.99-105
    • /
    • 1997
  • 이 논문에서는 다중경로 환경하에서 DLL (Delay lock loop)의 동작을 분석하였다. 전체 동작상태는 정상상태 시간오차 확률밀도함수와 MTLL (mean-time-to-lose-lock) 을 이용하여 분석하였다. 그리고 다중경로에서 페이딩 환경에서 지연성분의 존재로 진상-지상 판별함수 S(${\epsilon}$)가 0이 되는 추적 오차점 ${\epsilon}_{0}$가 0이 아님을 보이고, 지연성분의 전력 $g_{2}$, 지연시간 ${\tau}_{d}$의 증가로 인하여 ${\epsilon}_{0}$의 절대값이 증가하며, MTLL의 값이 작아짐을 보였다. 여기에서는 위의 변수들을 이용하여 다중경로 페이딩 환경에서의 시간오차 확률밀도함수와 MTLL을 선형적으로 구하였으며, 다중경로의 영향이 클 경우에는 MTLL은 상당히 낮아짐을 보이고, 이때 진상-지상 오프셋 ${\Delta}$의 증가시킴으로써 MTLL의 값을 증가시킬 수 있다는 것을 관찰하였다. 우리는 먼저 S(${\epsilon}$)가 0이 되는 추적오차점 ${\epsilon}_{0}$을 구하고, 이를 이용하여 진상-지상 판별함수 S(${\epsilon}$)를 선형 근사화시켰으며, 진상-지상 오프셋 ${\Delta}$의 증가에 따른 시간오차 확률밀도함수와 MTLL을 구하고 DDLL의 동작상태를 연구하여, 다중경로의 지연성분에 대한 전력 및 지연시간에 따라 MTLL이 상당히 낮게 되며, 이러한 경우 진상-지상 오프셋 ${\Delta}$을 증가시켜줌으로써 MTLL을 충분히 증가시키고 DLL의 성능을 개선할 수 있다는 결과를 얻었다.

  • PDF

Bearing-only Localization of GNSS Interference using Iterated Consider Extended Kalman Filter

  • Park, Youngbum;Song, Kiwon
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제9권3호
    • /
    • pp.221-227
    • /
    • 2020
  • In this paper, the Iterated Consider Extended Kalman Filter (ICEKF) is proposed for bearing-only localization of GNSS interference to improve the estimation performance and filter consistency. The ICEKF is an extended version of Consider KF (CKF) for Iterated EKF (IEKF) to consider an effect of bearing measurement bias error to filter covariance. The ICEKF can mitigate the EKF divergence problem which can occur when linearizing the nonlinear bearing measurement by a large initial state error. Also, it can mitigate filter inconsistency problem of EKF and IEKF which can occur when a weakly observable bearing measurement bias error state is not included in filter state vector. The simulation result shows that the localization error of the ICEKF is smaller than the EKF and IEKF, and the Root Mean Square (RMS) estimation error of ICEKF matches the covariance of filter.

Preliminary Analysis of Precise Point Positioning Performance Using Correction of Tropospheric Delay Gradient

  • Bu-Gyeom Kim;Changdon kee
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제12권2호
    • /
    • pp.141-148
    • /
    • 2023
  • In this paper, impacts of tropospheric delay gradient correction on PPP positioning performance were analyzed. A correction for tropospheric delay error due to the gradient was created and applied using external data, and reference station data were collected on a sunny day and a rainy day to analyze the GPS only dual-frequency PPP positioning results. As a result, on the sunny day, the convergence time was about 35 minutes and the final 3D position error was 10 cm, regardless of whether the correction for the tropospheric delay error by the gradient was applied. On the other hand, on the rainy day, the 3D position error converges only when the correction was applied, and the convergence time was about 34 minutes. Furthermore, the final 3D position error was improved from 30 cm to 10 cm. In addition, the analysis of the PPP by reference station location on the rainy day showed that the PPP positioning performance was improved when the correction was applied to a user located in an area where the weather changes.

다중경로 감쇄 채널에서의 광대역 부호분할다중접속방식 시스템의 주파수 및 보호 동기 오차에 따른 성능 분석 (Performance Analysis of Wideband CDMA System with Feq./Timing Error in Muliti-path Fading Channel)

  • 최영관;안철용;김동우
    • 한국통신학회논문지
    • /
    • 제25권6A호
    • /
    • pp.773-781
    • /
    • 2000
  • 이 논문에서는 광대역 부호분할다중접속방식 시스템의 순방향 연결의 다중경로 레일레이 감쇄 채널에서 주파수 및 부호 동기 오차에 따른 오류확률을 구하였다. 채널 오류확률은 이론적으로 구하고, 정보 오류확률은 모의실험으로 확인하였다. 부호 및 주파수 동기 오차에 따른 성능 떨어짐을 길쌈부호와 터보부호 두 부호화 구조에 따라 연구하였다. 결과에 따르면, 두 부호화 방식은 비슷한 성능 떨어짐을 겪는다. Tc/4의 부호 동기 오차에서 1dB성능이 떨어지고, 50 Hz의 주파수 동기 오차에서는 0.5dB 성능이 떨어진다.

  • PDF