• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.225-228
• /
• 1992

The purpose of this project is the presentation of new method for selection of a scalar control of linear time-periodic system. The approach has been proposed by Radziszewski and Zaleski [4] and utilizes the quadratic form of Lyapunov function. The system under consideration is assigned either in closed-loop state or in modal variables as in Calico, Wiesel [1]. The case of scalar control is considered, the gain matrix being assumed to be at worst periodic with the system period T, each element being represented by a Fourier series. As the optimal gain matrix we consider the matrix ensuring the minimum value of the larger real part of the two Poincare exponents of the system. The method, based on two-step optimization procedure, allows to find the approximate optimal gain matrix. At present state of art determination of the gain matrix for this case has been done by systematic numerical search procedure, at each step of which the Floquet solution must be found.

• The Journal of Korean Physical Therapy
• /
• v.34 no.4
• /
• pp.181-186
• /
• 2022

Purpose: This study was to applied to stretching plantar flexor and invertor at the same time to observe the effect of balance and walking ability. Methods: Subjects were instructed patients with ankle limited of motion, 6 months after stroke. We classified 20 subjects into two groups (experimental group: stretching plantar flexor and invertor at the same time, control group: only stretching plantar flexor). each group included 10 subjects and applied ankle stretcher for 20 minutes, 5 times/week during 4 weeks (total 20 times). Results: Both experimental group and control group showed significant increases in static balance, however, the significantly increases in step length and gait speed was observed only in the experimental group. There was no significant increases in step length and gait speed in the control group. Conclusion: Simultaneous stretching of ankle invertor and plantar flexion is effective in improving balance and walking ability in chronic stroke patients.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.295-302
• /
• 1998

In this paper, a new auto-tuning PI controller for the speed servo system of a PMSM is designed by using limited step response characteristics. The method is proposed that gets information about auto-tuning of PI regulator by the injection of step input, called limited input, during a transient response time of control. System parameter estimation and speed control could be continuously executed. This means that in despite of system uncertainty the system information obtained by limited input can be continuously applied to the PI regulator. We demonstrate the effectiveness of the proposed auto-tuning algorithm through simulation and experiment result of the speed control for a PMSM having monotone increasing step response.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.748-751
• /
• 1997

The White Beamline of the Pohang Accelerator Laboratory(PAL) consists of main and second slits, a microprobe system, two ion chambers, a video-microscope, and a Si(Li) detector. These machine components must be controlled remotely through computer system to make user experiments precise and speedy. A real-time computer control system was developed to control and monitor these machine components. A VNIEbus computer with OS-9 real-time operating system was used for low-level data acquisition and control. VME I/O modules were used for step motor control and scaler control. The software has modular structure for maximum performance and easy maintenance. We developed database, I/O driver, and control software. We used PC/Window95 for data logging and operator interface. Visual C++ was used graphical user interface programming. RS232C was used for communication between VME and PC.

• Journal of Powder Materials
• /
• v.17 no.1
• /
• pp.23-28
• /
• 2010

HDDR treated anisotropic Nd-Fe-B powders have been widely used for the sheet motors and the sunroof motors of hybrid or electric vehicles, due to their excellent magnetic properties. Microstructural alignment of HDDR treated powders are mostly depending on the hydrogen reaction in disproportionation step, so the specific method to control hydrogenation reaction is required for improving magnetic properties. In disproportionation step, hydrogenation pressure and reaction time were controlled in the range of 0.15~1.0 atm for 15~180 min in order to control the micorstructural alignment of $Nd_2Fe_{14}B$ phase and, at the same time, to improve remanence of HDDR treated magnet powders. In this study, we could obtain a well aligned anisotropic Nd-Fe-B-Ga-Nb alloy powder having high remanence of 12 kG by reducing hydrogen pressure down to 0.3 atm in disproportionation step.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.5
• /
• pp.843-850
• /
• 2002

This paper presents a simulation method using the transmission line modeling to reduce simulation runtime of hydraulic control systems. This method is based on separating the system components each other using the transmission line elements prior to simulation, which leads to divide the simulated system into several subsystems suitable for an even more efficient integration. It can also handle nonlinearities and discontinuities without flag signal when restarting integration. By applying variable integration timestep to parallel hydraulic circuits via parallel processing, it is shown that simulation run-time can be reduced significantly compared with that of Runge Kutta method.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1872-1873
• /
• 2011

This paper presents a discrete-time approximate linear model of the continuous-time pulse-width-modulated linear system, and then, by employing the resultant model, a simple LQ suboptimal control scheme is proposed for a DC-DC step-down buck converter. The proposed scheme effectively regulates the output voltage to the desired level, which is also verified by the numerical simulation.

• PNF and Movement
• /
• v.9 no.3
• /
• pp.25-29
• /
• 2011

Purpose : We investigated the effect of anti-flexion taping at the proximal interphalangeal joints on the gait in stroke patients with clawing toe. Methods : Nineteen patients (mean age $63.26{\pm}9.16$ years) with clawing toe were studied. Gait performance was measured under two different conditions : (1) non-tape (2) application of tape. Gait velocity, step time and stride length were examined with the GAITRite system Results : Compared to the non-tape control condition, step time of the hemiparetic side increased significantly after the application of tape(p=0.03). There was no significant mean differences between the taped and control conditions for stride length of the hemiparetic side and velocity. Conclusion : Whilst the anti-flexion tape at the proximal interphalangeal joints changed the walking by providing significant step time effect, positive changes were noted in stride length of the hemiparetic side after tape application. These findings indicate that anti-flexion tape procedures do not significantly alter stride length of the hemiparetic side and velocity.

• International Journal of Aeronautical and Space Sciences
• /
• v.12 no.3
• /
• pp.260-265
• /
• 2011

In this paper, integrated missile guidance and control systems using time-delay control (TDC) are developed. The next generation missile requires that an interceptor hits the target, maneuvering with small miss-distances, and has lower weight to reduce costs. This is possible if the synergism existing between the guidance and control subsystems is exploited by the integrated controller. The TDC law is a robust control technique for nonlinear systems, and it has a very simple structure. The feature of TDC is to directly estimate the unknown dynamics and the unexpected disturbance using one-step time-delay. To investigate the performance of the integrated controller, numerical simulations are performed as the maneuver of the target. The results show that the integrated guidance and control system has a good performance.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.785-787
• /
• 1999

In this paper, recursive least square algorithm is presented to estimate the parameters of step motor under low-speed operation. Parameter estimation is important for compensating the input current by calculating the ratio of the motor torque constant and detent torque constant that causes torque-ripple in low-speed applications. On-line parameter estimation process is a preliminary procedure to apply step motor to adaptive control. Computer simulation shows that the estimated parameters converge in finite time.