• Fire Science and Engineering
• /
• v.26 no.6
• /
• pp.99-108
• /
• 2012

These days, spontaneous ignition phenomena by oxidizing heat frequently occur in the circumstances of processing and storing waste tires. Therefore, to examine the phenomena, in this work, this researcher conducted the tests of fires of fragmented waste tires (shredded tire), closely investigated components of the fire residual materials collected in the processing and storing place, and analyzed the temperature of the starting of the ignition, weight loss, and heat of reaction. For the study, this researcher conducted fire tests with fragmented waste tires in the range of 2.5 mm to 15 mm, whose heat could be easily accumulated, and performed heat analysis through DSC and TGA, DTA, DTG, and GC/MS to give scientific probability to the possibility of spontaneous ignition. According to the tests, at the 48-hour storage, rapid increase in temperature ($178^{\circ}C$), Graphite phenomenon, smoking were observed. And the result from the DTA and DTG analysis showed that at $166.15^{\circ}C$, the minimum weight loss occurred. And, the result from the test on the waste tire analysis material 1 (Unburnt) through DSC and TGA analysis revealed that at $180^{\circ}C$ or so, thermal decomposition started. As a result, the starting temperature of ignition was considered to be $160^{\circ}C$ to $180^{\circ}C$. And, at $305^{\circ}C$, 10 % of the initial weight of the material reduced, and at $416.12^{\circ}C$, 50 % of the intial weight of the material decreased. The result from the test on oxidation and self-reaction through GC/MS and DSC analysis presented that oxidized components like 1,3 cyclopentnadiene were detected a lot. But according to the result from the heat analysis test on standard materials and fragmented waste tires, their heat value was lower than the basis value so that self-reaction was not found. Therefore, to prevent spontaneous ignition by oxidizing heat of waste tires, it is necessary to convert the conventional process into Cryogenic Process that has no or few heat accumulation at the time of fragmentation. And the current storing method in which broken and fragmented materials are stored into large burlap bags (500 kg) should be changed to the method in which they are stored into small burlap bags in order to prevent heat accumulation.

• Culinary science and hospitality research
• /
• v.20 no.6
• /
• pp.235-244
• /
• 2014

The purpose of this study was to investigate the effect of freezing and thawing rate on the physical properties of soybean sprouts to improve the quality of processed soybean sprouts during distribution and storage. Cooked soybean sprouts were frozen by air-blast freezing (ABF) system at $-45^{\circ}C$ or natural air convection freezing (NCF) system at $-24^{\circ}C$, then thawed using microwave oven by varying output power (0, 400, 800 and 1,000 W) until $75^{\circ}C$. The quality of soybean sprouts was measured by the water content, hardness and springiness. In addition, the internal microstructure of soybean sprouts was observed by optical microscope. For results, water content of soybean sprouts thawed by 1,000 W in a microwave showed the lowest value after natural air convection freezing. Springiness of soybean sprouts thawed by all amounts of output power was decreased in comparison with control. Hardness was increased only in soybean sprouts thawed by 1,000 W after air-blast freezing. However the gaps between springiness and hardness were relatively small with control at 1,000 W thawing, after air-blast freezing. Internal microstructure of the soybean sprouts was more damaged as freezing and thawing time were increased. In conclusion, high freezing and thawing rate might improves the quality of soy bean sprout, and IQF freezing and 1,000 W of microwave thawing appears to be the optimum condition for frozen HMR production. From the results freezing and thawing process parameters might can be use as quality control parameters as various type of sprout products processing.

• Microbiology and Biotechnology Letters
• /
• v.41 no.3
• /
• pp.327-334
• /
• 2013

For the development of hardy kiwi wine, we arranged for the post-maturity of hardy kiwi fruit, treated them with calcium carbonate and a pectinase enzyme complex, investigated the resulting physicochemical properties and conducted a sensory evaluation. The period determined for creating post-maturity in the hardy kiwi fruit was determined as 5 days storage at room temperature following maturity. During this time the yield of fruit juice was increased from 22.1% to 53.5% using 0.1% (v/v) cytolase PCL5 for 2 h at room temperature. 0.1% (w/v) calcium carbonate was also added during the process of aging, for the reduction of the sour taste. The fermentation trial of the hardy kiwi wine was prepared using water (25% or 50%), sugar ($24^{\circ}brix$), 0.1% (w/v) $CaCO_3$, 0.1% (v/v) cytolase PCL5, $K_2S_2O_5$ (200 ppm), and yeast ($1.5{\times}10^7$ cell/ml). Fermentation then occurred for 2 weeks at $20^{\circ}C$. The pH value, total acidity, alcohol, and reducing sugar content of the resulting hardy kiwi wines of 25% (v/w) and 50% (v/w) water, were in a range of pH 3.4-3.7, 1.12-1.21%, 14.3-14.4%, and 15-16 g/l, respectively. Citric acid and fructose constituted the major organic acids and the free sugar of the 25% and 50% hardy kiwi wine, respectively. Volatile flavor components, including 10 kinds of esters, 8 kinds of alcohols, 5 kinds of acids, 3 kinds of others and aldehydes, were determined by GC analysis. The results of sensory evaluation demonstrated that 50% hardy kiwi wine is more palatable than 25% hardy kiwi wine.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.1
• /
• pp.25-39
• /
• 2018

NIST(National Institute of Standards and Technology) has recently published SP 800-90B second draft which is the document for evaluating security of entropy source, a key element of a cryptographic random number generator(RNG), and provided a tool implemented on Python code. In SP 800-90B, the security evaluation of the entropy sources is a process of estimating min-entropy by several estimators. The process of estimating min-entropy is divided into IID track and non-IID track. In IID track, the entropy sources are estimated only from MCV estimator. In non-IID Track, the entropy sources are estimated from 10 estimators including MCV estimator. The running time of the NIST's tool in non-IID track is approximately 20 minutes and the memory usage is over 5.5 GB. For evaluation agencies that have to perform repeatedly evaluations on various samples, and developers or researchers who have to perform experiments in various environments, it may be inconvenient to estimate entropy using the tool and depending on the environment, it may be impossible to execute. In this paper, we propose high-speed implementations and an efficient memory usage technique for min-entropy estimation algorithm of SP 800-90B. Our major achievements are the three improved speed and efficient memory usage reduction methods which are the method applying advantages of C++ code for improving speed of MultiMCW estimator, the method effectively reducing the memory and improving speed of MultiMMC by rebuilding the data storage structure, and the method improving the speed of LZ78Y by rebuilding the data structure. The tool applied our proposed methods is 14 times faster and saves 13 times more memory usage than NIST's tool.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.9
• /
• pp.1314-1319
• /
• 2005

The purpose of this study was to investigate the antioxidative effects of Lycii fructus powder (LFP) solvent extracts and Maejakgwa made with LFP. The solvent extracts of LFP were added to soybean oil in the quantity of $0.05\%$. The solvents used were methanol, ethanol, ethyl acetate and petroleum ether. Soybean oil without the addition of LFP was used as a negative control. Soybean oil with $0.02\%$ butylated hydroxytolune (BHT) and $\alpha$-tocopherol were used as positive controls. Each sample was stored at $50^{\circ}C$ for 30 days. The oxidation level of these samples was determined by measuring the acid value, peroxide value and thiobarbituric acid (TBA) value. The oxidation level of solvent extracts of $0.05\%$ LFP was lower than both the negative control and $\alpha$-tocopherol. Especially, methanol extract of $0.05\%$ LFP was the lowest. The methanol extract (320 min) and ethanol extract (316 min) demonstrated longer induction periods, compared to the control (253 min), $\alpha$- tocopherol (255 min) and BHT (309 min) by Rancimat method. Acid value of Maejakgwa was increased during the storage time, but it was lower in Maejakgwa made with LFP than in the control group. Peroxide value was increased rapidly for 30 days and then decreased. TBA value was lower in Maejakgwa made with 3, 6, $9\%$ LFP than in those made with $15\%$ LFP and the control.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.2
• /
• pp.98-105
• /
• 2018

The sale of brown rice batches composed of rice produced in different years is prohibited in Korea. Thus, new methods for the identification of the year of production are critical for maintaining the distribution of high quality brown rice. Here, we describe the exploitation of an enzyme that can be used to discriminate between freshly harvested and one-year-old brown rice. The degree of enzyme activity was visualized through freshness test with Guaiacol, Oxydol, and p-phenylenediamine reagents. With electronic eye equipment, we selected 29 color codes for identifying new brown rice and old brown rice. The discrimination power of selected color codes showed a minimum of 0.263 to a maximum of 0.922 and an average value of 0.62. The accuracy with which new brown rice and old brown rice could be identified was 100% in principal component analysis (PCA) and discriminant function analysis (DFA). The DFA analysis had greater discriminatory power than did the PCA analysis. A verification test using new brown rice, old brown rice, or a mixture of the two was then performed to validate our method. The accuracy of identification of new and old brown rice was 100% in both cases, whereas mixed brown rice samples were correctly classified at a rate of 96.9%. Additionally, in order to test whether the discriminant constructed in winter can be applied to samples collected in summer, new and old brown rice stored for 8 months were collected and tested. Both new and old brown rice collected in summer were classified as old brown rice and showed 50% identification accuracy. We were able to attribute these observations to changes in enzyme content over time, and therefore we conclude, it will be necessary to develop discriminants that are specific to distinct storage periods in the near future.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.83-89
• /
• 2020

For the past few decades, as part of efforts to protect the environment where fossil fuels, which have been a key energy resource for mankind, are becoming increasingly depleted and pollution due to industrial development, ecofriendly secondary batteries, hydrogen generating energy devices, energy storage systems, and many other new energy technologies are being developed. Among them, the lithium-ion battery (LIB) is considered to be a next-generation energy device suitable for application as a large-capacity battery and capable of industrial application due to its high energy density and long lifespan. However, considering the growing battery market such as eco-friendly electric vehicles and drones, it is expected that a large amount of battery waste will spill out from some point due to the end of life. In order to prepare for this situation, development of a process for recovering lithium and various valuable metals from waste batteries is required, and at the same time, a plan to recycle them is socially required. In this study, we introduce a nanoscale pattern transfer printing (NTP) process of Li2CO3, a representative anode material for lithium ion batteries, one of the strategic materials for recycling waste batteries. First, Li2CO3 powder was formed by pressing in a vacuum, and a 3-inch sputter target for very pure Li2CO3 thin film deposition was successfully produced through high-temperature sintering. The target was mounted on a sputtering device, and a well-ordered Li2CO3 line pattern with a width of 250 nm was successfully obtained on the Si substrate using the NTP process. In addition, based on the nTP method, the periodic Li2CO3 line patterns were formed on the surfaces of metal, glass, flexible polymer substrates, and even curved goggles. These results are expected to be applied to the thin films of various functional materials used in battery devices in the future, and is also expected to be particularly helpful in improving the performance of lithium-ion battery devices on various substrates.

• Journal of Mushroom
• /
• v.20 no.3
• /
• pp.173-177
• /
• 2022

Mushroom production in Korea is concentrated on five major mushroom types. To create a new source of income for farmers, it is necessary to establish new mushroom production and marketing systems. This study was conducted to evaluate the marketability of and establish a marketing strategy for Pleurotus nebrodensis variety 'Uram'. The evaluation of distributors showed that it was necessary to cultivate mushrooms of uniform shape and size, to compensate for their low storability, and to sell them in small packages. The consumer evaluation showed that the texture of P. nebrodensis had the highest level of satisfaction for quality, but the levels of satisfaction for size and shape were low. In the consumer evaluation, as in the distributor evaluation, improvements in cultivation were found to be necessary, as the storage time is short due to a high moisture content. An evaluation of the market gave the following results regarding the marketing strategy. It was found to be necessary to consider the production of mushrooms of a uniform shape and size and sell them in small packages in the range of 150 to 300 g. The price of the mushrooms should be set using a high-end strategy for high-end sales. The mushrooms should be introduced to local food and eco-friendly stores in the early stages of production. Subsequently, if farmhouse production increases, shipments should be made to wholesale markets through a regular contract. Finally, considering that P. nebrodensis is an unfamiliar mushroom to consumers, it is necessary to promote it by increasing the accessibility of consumers through tasting events and experience groups.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.3
• /
• pp.439-445
• /
• 2014

This study aimed to determine the quality characteristics of ginseng seed oil as well as evaluate the efficacy of ginseng seed oil as a food resource. Ginseng seed oil was obtained by different extraction methods; from solvent extraction oil, supercritical fluid extraction oil, and screw pressed extraction oil. Total unsaturated fatty acids were present at 97.72~97.92%. Oleic acid (80.13~81.16%) was the highest, followed by linoleic acid (14.98~15.69%). The total phenol content (mg gallic acid equivalent/100 g oil) was higher in screw pressed extraction oil ($56.32{\pm}1.47$) compared to others. ${\gamma}$-Tocopherol was only present in ginseng seed oil and screw pressed extraction oil showed the highest levels of ${\gamma}$-tocopherol ($5.95{\pm}0.25$ mg/100g oil) among the tested samples. Screw pressed extraction oil showed the greatest oxidative stability with an induction time of 16.58 hours. Acid values and peroxide values of ginseng seed oil increased with increasing storage period. The total phenol and ${\gamma}$-tocopherol contents were higher in screw pressed extraction oil than in other ginseng seed oils, which suggests that screw pressed extraction oil has the greatest oxidative stability.

• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.644-649
• /
• 1998

To investigate the fermentation characteristics of Kimchi which was made at $12{\pm}1^{\circ}C$ and stored at $17{\pm}1^{\circ}C$ and $4{\pm}1^{\circ}C$, pH, total acid, total microbes, lactic acid bacteria cell count, dissolved $CO_2$content, reducing sugars and temperature at the center of Kimchi jar were measured and to know how much Japanese like to have Korean traditional Kimchi, Kimchi samples with 1.0, 2.0 and 3.0% salt contents were prepared and surved to panelist at $4{\pm}1^{\circ}C$. Sensory evaluation of Kimchi in terms of appearance, texture, carbonated mouthfeel, salty taste, sour taste, peppery taste and overall acceptability was done by scoring system with maximum 7 points and was analyzed statistically by SAS program. The results of fermentation of Kimchi which was made at $12{\pm}1^{\circ}C$ and stored at $17{\pm}1^{\circ}C\;and\;4{\pm}1^{\circ}C$ were as follows: pH and total acid content of Kimchi which was stored at $17{\pm}1^{\circ}C$ for 4 days were almost same as those of Kimchi at $4{\pm}1^{\circ}C$ for 48 days. Cell counts of total microbes and lactic acid bacteria in Kimchi which was stored at $17{\pm}1^{\circ}C$ for 2 days and at $4{\pm}1^{\circ}C\;for\;9\;days\;were\;1.5{\times}10^9\;cells/mL\;and\;6.3{\times}10^8\;cells/mL,\;2.0{\times}10^8\;cells/mL\;and\;8.7{\times}10^7\;cells/mL$, respectively. Time and temperature at the center of Kimchi jar during fermentation was took 25 and 35 hours to get to $17^{\circ}C\;and\;4^{\circ}C$ from initial temperature, respectively. Japanese who had experiences in eating Kimchi liked Korean traditional Kimchi with 2.0% of salt content. Sensory evaluation of Japanese consumer on peppery taste and overall acceptability of Kimchi showed significant difference (P<0.05).