• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.311-316
• /
• 2004

For the location estimation in the conventional LPMS(Loose Parts Monitoring System), it is popular to employ a group delay among the acoustic sensors installed within a 3 ft range from the impact source. However, there exists inherent error in determining the arrival time differences of the generated wave group among the neighboring sensors. To overcome this problem in this study, the two dimensional approach has been proposed and applied to effectively estimate the arrival time differences by using a continuous wavelet transform which is one of the linear time-frequency analysis methods. The experiment has been performed to both the plate model and the real steam generator in a nuclear power plant. It is expected that the reliability of the location estimation could be enhanced when the proposed time-frequency method is introduced into the LPMS system.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.5
• /
• pp.452-459
• /
• 2021

Estimating the mutual time delay between two acoustic sensors is used in various fields such as tracking and estimating the location of a target in room acoustics and sonar. In the time delay estimation methods, there are a non-parametric method, such as Generalized Cross Correlation (GCC), and a parametric method based on system identification. In this paper, we propose a time delay estimation method based on the parametric method. In particular, we propose a method that considers the noise in each receiving acoustic sensor. Simulation confirms that the proposed algorithm is superior to the existing generalized cross-correlation and adaptive eigenvalue analysis methods in white noise and reverberation environments.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.4
• /
• pp.5-10
• /
• 1997

In this paper, a new time delay estimation algorithm, WTD-LMSTDE was proposed. This method has great improvement in convergence rate relative to the time domain approach by decreasing the eigen value spread of input signal autocorrelation matrix. The performance of the algorithm was evaluated for the cases of time invariant time delay and time varying time delay. In the case of time invariant time delay, the estimation accuracy of WTD-LMSTDE was better than that of LMSTDE from 3.3% to 12.5% with respect to SNR. In the case of time varying time delay, the mean error power of WTD-LMSTDE in linear increased delay environment was decreased about 2.4dB compared to that of LMSTDE under noise-free condition. As a result, we showed that the performance of WTD-LMSTDE is better than of LMSTDE.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.7
• /
• pp.510-514
• /
• 2009

If the existing real-time systems are integrated based on SOA, real-time SOA should be developed. Generally, in real-time SOA a service can be divided into several small services and their estimated execution time is given by provider systems. However, an estimation, which analyzes time elements related to transmit and receive messages among requesters and providers, is needed. In order to enhance QoS of Web service, this paper proposes enhanced worst-case execution time estimation by considering WS-transaction and common use of multi-processors system.

• Journal of Environmental Science International
• /
• v.17 no.11
• /
• pp.1281-1293
• /
• 2008

This study aims at the estimation of dam failure time and dam failure scenario analysis of and applied to Yeoncheon Dam which was collapsed August 1st 1999, using HEC-HMS, DAMBRK-FLDWAV simulation model. As the result of the rainfall-runoff simulation, the lancet flood amount of the Yeoncheon Dam site was $10,324\;m^3/sec$ and the total outflow was $1,263.90\;million\;m^3$. For the dam failure time estimation, 13 scenarios were assumed including dam failure duration time and starting time, which reviewed to the runoff results. The simulation time was established with 30 minutes intervals between one o'clock to 4 o'clock in the morning on August 1, 1999 for the setup standard for each case of the dam failure time estimation, considering the arrival time of the flood, when the actually measured water level was sharply raising at Jeongok station area of the Yeoncheon Dam downstream, As results, dam failure arrival time could be estimated at 02:45 a.m., August 1st 1999 and duration time could be also 30 minutes. Those results and procedure could suggest how and when dam failure occurs and analyzes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.76.5-76
• /
• 2001

This paper considers the parameter estimation for the state-space model based time-delay systems in the case that the Lyapunov stability of the system is guaranteed. In order to estimate the parameters, two estimation methods can be proposed which are known as the parallel model and the series parallel model. It is shown that the parameters can be estimated using each method, and also certied that the results are correct by simulations.

• Journal of the Korean Statistical Society
• /
• v.25 no.3
• /
• pp.359-368
• /
• 1996

The maximum likelihood estimation is discussed for the NLAR model with Laplacian marginals. Since the explicit form of the estimates cannot be obtained due to the complicated nature of the likelihood function we utilize the automatic computer optimization subroutine using a direct search complex algorithm. The conditional least square estimates are used as initial estimates in maximum likelihood procedures. The results of a simulation study for the maximum likelihood estimates of the NLAR(1) and the NLAR(2) models are presented.

• Journal of Welding and Joining
• /
• v.8 no.1
• /
• pp.31-42
• /
• 1990

Arc must be stable during welding first of all other factors for obtaining sound weldment, especially in the automation of welding process. Arc stability is somewhat sophisticated phenomenon which is not clearly defined yet. In consumable electrode welding, the voltage and current variation due to metal transfer enables to assess arc stability. Recently, statistical analyses of the voltage and current waveform factors are performed to assess the degress of arc stability which is assessed and controlled by operator's own experience by now. But, considering the increasing need and the trend of automation of welding process, it is necessary to monitor arc stability in real-time. In this sutdy, the modified stability index composed of two voltage and current wvaeform factors (arc time and short circuit time) reduced from four factors (arc time, short circuit time, average arc current and average short circuit current) in Mita's index by the welding electrical circuit modeling is proposed and verified by experiments to be well estimating arc stability in the static sense. Also, the recursive calculation form estimating present arc stability in the dynamic sense is developed for real-time estimation. The results of applying the recursive index during welding show good estimation of arc stability in real-time. Therefore, the results of this study offers the mean for real-time control arc stability.

• International Journal of Aeronautical and Space Sciences
• /
• v.5 no.1
• /
• pp.94-100
• /
• 2004

Ionospheric time delay is the biggest error source for single-frequency DGPSapplications, including time transfer and Wide Area Differential GPS (WADGPS).Currently, there are many attempts to develop real-time ionospheric time delayestimation techniques to reduce positioning error due to the ionospheric time delay.Klobuchar model is now widely used for ionosphehc time delay calculation forsingle-frequency users. It uses flat surface at night time and cosine surface atdaytime[1], However, the model was developed for worldwide ionosphere fit, it isnot adequate for local area single-frequency users who want to estimateionospheric time delay accurate1y[2]. Therefore, 3-D ionosphere model usingtomographic estimation has been developed. 3-D tomographic inversion modelshows better accuracy compared with prior a1gorithms[3]. But that existing 3-Dmodel still has problem that it requires many coefficients and measurements forgood accuracy. So, that algorithm has Umitation with many coefficients incontinuous estimation at the small region which is obliged to have fewermeasurements.In this paper, we developed an modified 3-D ionosphehc time delay modelusing tomography, which requires only fewer coefficients. Because the combinationsof our base coefficients correspond to the full coefficients of the existing model, ourmodel has equivalent accuracy to the existing. We confirmed our algorithm bysimulations. The results proved that our modified algohthm can perform continuousestimation with fewer coefficients.

• The KIPS Transactions:PartC
• /
• v.10C no.6
• /
• pp.711-716
• /
• 2003

We propose a new Interet time synchronization model using danamic linear model and introduce the characteristics of internet transmission delays. SNTP(Simple Network Time Protocol) has been widely used as a time synchronization method on the Internet. While SNTP provides a very simple usage, SNTP may not provide the stable services, since SNTP does not consider the several essential error factors. In order to overcome the instabitily of SNTP, we analyze the process of time estimation of SNTP and find the difference between forward transmission delay and backward transmission delay operates the main error on the estimation of an time offset.