• Geotechnical Engineering
• /
• v.8 no.2
• /
• pp.45-58
• /
• 1992

An elasto-plastic constitutive model for geological materials, which satisfies the flezibility and stability at the same time, can be used in a number of geotechnical problems. Using the spacing ratio of critical state, a flexible model is proposed based on the stability of modified Camflay model. The spacing ratio of critical state can be simply evaluated, and practically used in describing the undrained shearing behavior of clay. The proposed model has precisely predicted the stress paths and stress -strain relationships, compared with the modified Camflay model, with respect to undrained triaxial test results. Besides, the effects of strain rate, creep, and relaxation can also be considered. Using the quasi-state boundary surface, the constitutive relations are well predicted. Therefore, it is found that the assumption of associative flow rule is well posed for undrained behavior of normally consolidated clay.

• The KIPS Transactions:PartB
• /
• v.13B no.2 s.105
• /
• pp.155-162
• /
• 2006

The medical thesaurus, MeSH (Medical Subject Heading), has been used as a controlled vocabulary thesaurus for English medical paper indexing for a long time. In this paper, we propose an automatic cross language keyword assignment method, which assigns English MeSH index terms to the abstract of a Korean medical paper. We compare the performance with the indexing performance of human indexers and the authors. The procedure of index term assignment is that first extracting Korean MeSH terms from text, changing these terms into the corresponding English MeSH terms, and calculating the importance of the terms to find the highest rank terms as the keywords. For the process, an effective method to solve spacing variants problem is proposed. Experiment showed that the method solved the spacing variant problem and reduced the thesaurus space by about 42%. And the experiment also showed that the performance of automatic keyword assignment is much less than that of human indexers but is as good as that of authors.

• Steel and Composite Structures
• /
• v.38 no.1
• /
• pp.87-102
• /
• 2021

To investigate the failure form, bending stiffness, and residual bearing capacity of monolithic composite beams with laminated slab throughout the fire process, fire tests of four monolithic composite beams with laminated slab were performed under constant load and temperature increase. Different factors such as post-pouring layer thickness, lap length of the prefabricated bottom slab, and stud spacing were considered in the fire test. The test results demonstrate that, under the same fire time and external load, the post-pouring layer thickness and stud spacing are important parameters that affect the fire resistance of monolithic composite beams with laminated slab. Similarly, the post-pouring layer thickness and stud spacing are the predominant factors affecting the bending stiffness of monolithic composite beams with laminated slab after fire exposure. The failure forms of monolithic composite beams with laminated slab after the fire are approximately the same as those at room temperature. In both cases, the beams underwent bending failure. However, after exposure to the high-temperature fire, cracks appeared earlier in the monolithic composite beams with laminated slab, and both the residual bearing capacity and bending stiffness were reduced by varying degrees. In this test, the bending bearing capacity and ductility of monolithic composite beams with laminated slab after fire exposure were reduced by 23.3% and 55.4%, respectively, compared with those tested at room temperature. Calculation methods for the residual bearing capacity and bending stiffness of monolithic composite beams with laminated slab in and after the fire are proposed, which demonstrated good accuracy.

• Particle and aerosol research
• /
• v.17 no.4
• /
• pp.81-89
• /
• 2021

Understanding particle-laden flow around cylindrical bodies is essential for the better design of various applications such as filters. In this study, laminar flows around two tandem cylinders and the motions of particles in the flow are numerically investigated at low Reynolds numbers. We aim to reveal the effects of the spacing between cylinders, Reynolds number and particle Stokes number on the characteristics of particle trajectories. When the cylinders are placed close, the unsteady flow inside the inter-cylinder gap at Re = 100 shows a considerable modification. However, the steady recirculation flow in the wake at Re = 10 and 40 shows an insignificant change. The change in the flow structure leads to the variation of particle dispersion pattern, particularly of small Stokes number particles. However, the dispersion of particles with a large Stokes number is hardly affected by the flow structure. As a result, few particles are observed in the cylinder gap regardless of the cylinder spacing and the Reynolds number. The deposition efficiency of the upstream cylinder shows no difference from that of a single cylinder, increasing as the Stokes number increases. However, the deposition on the downstream cylinder is found only at Re = 100 with large spacing. At this time, the deposition efficiency is generally small compared to that of an upstream cylinder, and the deposition location is also changed with no deposited particles near the stagnation point.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.3
• /
• pp.195-199
• /
• 2010

This experiment was conducted to develop optimum sesame cultivation practices as succeeding cropping system of watermelon in the greenhouse condition. We also compared major components in sesame seed cultivated in the greenhouse and open field condition. The adaptable varieties under the greenhouse condition were white sesame 'Pyoungan' and black sesame 'Jinki' which showed higher yield and disease resistance. We also conducted several experiments to determine optimum sowing date, planting density and pinching time. Grain yields were statistically different according to the several sowing dates. In general, sesame sowing on June 30th showed higher grain yields than July 10th, July 20th and July 30th in the greenhouse. We also found out sesame cultivation practice with the row spacing of 40 cm and interplant spacing of 30 cm (a few branch type) or 40 cm (many branch type) showed higher yield than other treatments. Optimum pinching time was 25 days after first flowering in main stem when thousand seed weight and grain yield were highest. In the comparison of major components of sesame at the different cultivation conditions, sesame seeds cultivated in the greenhouse contained 4% much more oil content than open field condition. The lignan compounds, sesamin and sesamolin were also higher by 6% in the greenhouse than open field condition. It was concluded that sesame cultivation practices as succeeding cropping system of watermelon in the greenhouse condition guaranteed higher grain yield with less labor input which is now emerging alternative farming practice system in present aging rural society and will also give sesame cultivation farmers to increase net income in Korea.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.30-44
• /
• 2021

Experimental investigation of counter-rotating propellers is subject to multiple time and cost constraint because of additional design parameters unlike single propeller. Also, a lot of computing time and resources are required for numerical analysis due to consideration of the interference between the upper and lower propellers. In the present study, numerical simulations were conducted to investigate the hover performance of counter-rotating propellers by using actuator method which is considered to be time-efficient. The accuracy of the present numerical methods was validated by comparing the ANSYS Fluent which is commercial CFD code. The axial spacing and rotational speed were selected as the analysis variables, and the aerodynamic performance was obtained under various conditions. Based on the obtained results, the Figure of Merit (FM) of single propeller and counter-rotating propellers and a prediction factor which enables prediction of counter-rotating propeller performance using a single propeller were derived to evaluate availability of the actuator method.

• Journal of the Korean earth science society
• /
• v.45 no.4
• /
• pp.363-376
• /
• 2024

Alluvial beds are intimately associated with electrical properties related to soil types, including clay mineral content, porosity, and water content. The hydraulic property governs water movement and storage in alluvial beds. This study revealed electrical resistivity and hydraulic properties in space and time in relation to the hydrogeological data, groundwater pumping, and rainfall infiltration into the alluvial bed located in Daesan-myeon, Changwon City. An electrical resistivity survey with electrode spacings of 2 and 4m using a dipole-dipole array indicates that electrical resistivity changes in the alluvial bed depend on groundwater pumping and rainfall events. Additionally, rainfall infiltration varies with hydraulic conductivity in the shallow zone of the alluvial bed. The 2 m electrode spacing survey confirms that electrical resistivity values decrease at shallow depths, corresponding with rainfall and increased water content in the soil, indicating rainfall infiltration approximately 1-2 m below the land surface. The 4m electrode spacing survey reveals that hydraulic conductivity (K) values and electrical resistivity (ρ) values display an inverse relationship from the surface to the water table (approximately 9 m) and at deeper levels than the water table. Notably, ρ values are impacted by pumping around the depth of the water table at 9 m. This study suggests that time-lapsed electrical resistivity surveys in space and time could be effective tools for detecting the impact of rainfall and pumping, as well as hydraulic conductivity in shallow alluvial beds.

• Journal of Korean Society of Transportation
• /
• v.27 no.6
• /
• pp.29-44
• /
• 2009

A variety of research efforts, using advanced wireless communication technologies, have been made to develop more reliable traffic information system. This study presents a novel decentralized traffic information system based on vehicle infrastructure integration (VII). A major objective of this study was also to devise a methodology for determining appropriate spacing of roadside equipment (RSE) to fully exploit the benefits of the proposed VII-based traffic information system. Evaluation of travel time estimation accuracy was conducted with various RSE spacings and the market penetration rates of equipped vehicle. A microscopic traffic simulator, VISSIM, was used to obtain individual vehicle travel information for the evaluation. In addition, the ANOVA tests were conducted to draw statistically significant results of simulation analyses in determining the RSE spacing. It is expected that the proposed methodology will be a valuable precursor to implementing capability-enhanced next generation traffic information systems under the forthcoming ubiquitous transportation environment.

• Korean Journal of Medicinal Crop Science
• /
• v.3 no.2
• /
• pp.140-145
• /
• 1995

This experiment was carried out to investigate the effect of plant spacing on the growth and root yield at different harvesting year in Astragalus membranceus. A local variety collected in Jung Sun. Kang Won was used on the 30 and 40cm row spacing, with different spacing between plant of 5, 10, 15, 20cm respectively. Nitrogen, phosphorus and potassium fertilizers were applied as 6, 8 and 9kg/10a respectively, with compost of 1,000kg/10a. Branches, root length, root diameter and root weight were increased in the sparse planting compared with the dense planting. But emergence date, flowering date, stem height and node number were not significantly changed with plant spacing. The highest root yield was 211.8kg/10a at the $30{\time}10cm(67\;plants/m^2)$ in 1 year old plants of Astragalus membranceus. In case of two years old plants, branches, node number, root length, root diameter and root weight were increased in the sparse planting compared to the dense planting. But harvesting ratio was decreased in the dense planting, The highest dried root yield was 292kg/10a at the $40{\time}10cm\;(25\;Plants/m^2)$. In case of 3 years old plants, aerial part and root growth pattern were similar to the 2 years old plants, The dried root yield was highest(623kg/10a) in the $40{\time}10cm(25plants/m^2)$.

• Structural Engineering and Mechanics
• /
• v.4 no.6
• /
• pp.589-600
• /
• 1996

An explicit 4th order time integration scheme for solving the convection-diffusion equation is discussed in this paper. A system of ordinary differential equations are derived first by discretizing the spatial derivatives of the relevant PDE using the finite difference method. The integration of the ODEs is then carried out using a 4th order scheme and a self-adaptive technique based on the spatial grid spacing. For a non-uniform spatial grid, different time step sizes are used for the integration of the ODEs defined at different spatial points, which improves the computational efficiency significantly. A numerical example is also discussed in the paper to demonstrate the implementation and effectiveness of the method.