• 한국세라믹학회지
• /
• 제33권8호
• /
• pp.935-941
• /
• 1996

Two-dimensional carbon/carbon preforms made of PAN-based carbon yarn and phenolic resin were densified with pyrolysis of propane by pulse chemical vapor infiltration where repeated the cycle of gas introduction residence and evacuation. Maximim density increment was 14% when infiltration temperature and time were 100$0^{\circ}C$ and 21.25 hrs respectively. The distribution of deposits of pyrocarbon by this process has been occurred uniformly in the bottom middle and top of carbon/carbon composite preform Pulse CVI with residence is most effective in increasing density and shortening infiltration time among isothermal CVI and pulse CVI with and without residence.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.675-679
• /
• 1992

In industry, the speed control of single-phase induction motor in domestic use is generally controlled by a simple ON-OFF or PID control method. However, in this case, in order to have a good speed regulating characteristics, itself should be modified in accordance with the optimum PID factors which are varied each time operating speed changes. Shortening the development time and saving the cost which are needed to modify the controller is a major problem to be solved now in industry. In order to alleviate the above difficulties, it is proposed to apply adaptive control technique using MRFAC(Model Reference Following Adaptive Control) for the speed control of single-phase induction motor which has scarcely been studied. In this paper, the above speed control technique is achieved using MCS-96 one chip micro controller with a good speed control characteristics and it is expetted to open a wide application field in the speed control of single-phase induction motor in the future.

• 한국경영과학회지
• /
• 제21권2호
• /
• pp.171-186
• /
• 1996

This paper comes from an observation that overemphasis on capacity utilization meausre, which is usual under capacity shortage, can seriously hurt the firm's profit and potential process improvement. We suggest a model that can be used in designing a coordination scheme for decentralized marketing and manufacturing activities. Using a price and time-sensitive demand and capacitated lotsizing model, we derive an effective communication medium betwen marketing and manufacturing. This Balance Indicator of process capacity and flexibility also implies that the increase in capacity availability and setup time reduction should be balanced by its market requirements. This is particularly important when a firm tries to improve its process capability by kaizen. Further, the model can be used to show the comparative performances of scheduling policies under capacity imbalnce. We show the shortening the scheduling cycle can improve the firm profit without changing the simple scheduling rule.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.341-342
• /
• 2006

This study is concerned about the development of tower type automatic tool changer. The tower type automatic tool changer is developed to reduce stand-by time by shortening tool change time. The developed system can store more number of tools in small space. A structural analysis for the machine is carried out to check the machine design using commercial software, CATIA V5. In the result of structural analysis, the safety of the developed system is confirmed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.611-613
• /
• 1998

A structure of musculotendon model with a fatigue profile is investigated. The Hill-type musculotendon model can predicts the decline in muscle force for a given fatigue profile. It consists of nonlinear activation and contraction dynamics based on the physiological concepts. It is normalized for generalization to deal with the various muscles. Muscle force generated by continuous tetanic electrical monophasic pulsewidth modulation stimulation is decreased in time. A fatigue profile is expressed by a function of intramuscular acidification and applied to the relationship between muscle force and shortening velocity in contraction dynamics. The results of computer simulation are well matched with data in a literature which are isometrically performed for knee extension muscles. Also change in optimal fiber length has an effect only on muscle time, constant not on the steady-state tetanic force.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.353-362
• /
• 2008

Operation data and fault data are recorded at the TCMS(Train Control and Monitoring System) of train are very important record for repairs and inspection of train. there are two ways to transfer the data today. one is using memory card and the other is using wireless communications. This paper is proposed about TCMS wireless depot analytical equipment that transfers data recorded in train to depot equipment via wireless method. The TCMS wireless depot equipment configuration is an AP(Access Point) and a central server PC at depot equipment. This method has the advantage of decrease of personnel expenses, collection time and convenience of staffs. This paper is verified about the utility of use, efficient establishment position of an AP at depot, the safety of data receiving, the exactitude of data and the shortening of transmission time. and this equipment is now operating at shin-jeong depot of SeoulMetro.

• 한국시뮬레이션학회논문지
• /
• 제9권2호
• /
• pp.1-14
• /
• 2000

Recently, as construction of information infra including high-speed communication networks remarkably expands, more various information services have been provided. Thus the number of internet users rapidly increases, and it results in heavy load on Web server and higher traffics on networks. The phenomena cause longer response time that means worse quality of service. To solve such problems, much effort has been attempted to loosen bottleneck on Web server, reduce traffic on networks and shorten response times by caching informations being accessed more frequently at the proxy server that is located near to clients. And it is also possible to improve internet performance further by allowing clients to share informations stored in proxy caches. In this paper, we perform simulations of hierarchical proxy caches with the 3-level 4-ary tree structure by using real web traces, and analyze cache hit ratio for various cache replacement policies and cache sizes when the delayed-store scheme is applied. According to simulation results, the delayed-store scheme increases the remote cache hit ratio, that improves quality of service by shortening the service response time.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.9-12
• /
• 2006

In recent years, construction site has developed lots of new methods and materials for Time-Cost Trade-off and improving constructability. In the case of underground construction, especially, there are many restrictions and difficulties. Shortening of the construction time in construction of underground, we use top-down method in undergroud wall. A open slab has been designed for the purpose of overcoming a weak point of former top-down method. This study based on open slab on the under ground top-down method, to more improve constructability, to introduce the effect and the performance of top-down method.

• Nuclear Engineering and Technology
• /
• 제52권10호
• /
• pp.2313-2319
• /
• 2020

The goal of this project is to achieve an accurate segmentation of the pulmonary tumors besides shortening the time and increasing the accuracy. Here, improved region growing (IRG) algorithm is introduced in order to segment the lung tumor with a sufficient accuracy in a shorter time compared to the other basics methods. This comprehensive algorithm was applied on 4 patients CT images and the results of the various steps on segmentation improvement shown 98% accuracy as compared to the basic algorithm. The combination of "multipoint growth start" produced a desirable outcome in accurately bounding the tumor. The proposed algorithm improved tumor identification by less than 13% along with a sufficient percentage of compliance accuracy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.95-97
• /
• 1995

A superconducting current generator, or a superconducting rectifier(SCR) is used as a current source to energize a superconducting magnets in SMES, MRI. We selected a full-wave SCR among various SCR models and analyzed its operational characteristics by computer simulation. In process of pumping the current, the improvement of performance is dependent on how much bigger the open resistance of the switch is in comparison to load coil impedance when one of two switches become active. Faster transfer can he seen in resistive commutation mode by shortening the time elapsed for the resistance to arrive at certain level from zero state. Although recovery time for the switch has no direct effect on current pumping, optimal switch design is needed to increasing operational frequency.