• 제목/요약/키워드: Time Limits

검색결과 1,396건 처리시간 0.029초

영구형 큰느타리버섯 재배사의 환경요인 분석 (Analysis of Environment Factors in Pleurotus eryngii Cultivation House of Permanent Frame Type Structure)

  • 윤용철;서원명;이인복
    • 생물환경조절학회지
    • /
    • 제15권2호
    • /
    • pp.125-137
    • /
    • 2006
  • 본 연구에서는 큰느타리버섯 재배사의 환경조절을 최적화하고 시스템 설계에 대한 기초자료를 얻기 위하여 진주인근에 위치한 샌드위치패널을 이용한 영구형 재배사 2동을 대상으로 2003년 11월부터 2005년 10월까지 재배사 내부에서 측정한 환경인자들을 중심으로 검토하였다. 실험지역의 외기온은 평년의 것과 대체로 비슷한 경향을 보였다. 시스템 변경전의 경우, 동절기에는 전체적으로 설정온도보다 낮게 유지되었고, 또 최상부와 최하부의 최대온도 편차도 $5.1^{\circ}C$ 정도로 상층이 가장 높게 나타났다. 그러나 시스템의 변경 후의 경우, 난방시 대체로 설정온도 범위에서 조절되는 경향을 보였고, 공기정체나 온도층의 역전현상이 나타나지 않았다. 상대습도는 시스템 변경 후, $80{\sim}100%$ 정도의 범위로서 권장상대습도 범위에 있었다. 전체 재배기간동안 탄산가스 농도는 $400{\sim}3,300mg{\cdot}L^{-1}$ 정도의 범위에 있었다. 조도는 권장조도보다 전반적으로 낮게 유지되고 있음을 알 수 있었고, 산도는 대체로 일정하게 유지되었다. 수확량은 전체적으로 일정하지 않았고, 포기재배의 경우가 상대적으로 등외품이 적었으며, 증수 효과도 있었다. 전력소비량은 계절별로 일정한 경향이 있음을 알 수 있었고, 하절기보다 동절기에 전력소비량이 현저히 많은 것을 확인 할 수 있었다.

제7차 선택중심 고등학교 과학과 교육과정의 운영 실태와 과학교사 및 학생들의 인식 조사 (A Survey of the Actual Conditions of Operation and Perceptions of Science Teachers and Students Regarding the 7th Elective-Centered Curriculum of High School Science Subjects)

  • 최순화;김은숙;권오경;오창호;박국태
    • 대한화학회지
    • /
    • 제52권1호
    • /
    • pp.96-106
    • /
    • 2008
  • 이 연구는 제7차 선택중심 고등학교 과학과 교육과정에 대한 학교 현장의 운영 실태를 파악하고, 과 학교사와 학생들의 인식을 알아보기 위한 것이다. 연구를 위하여 제7차 선택중심 교육과정을 경험한 127명의 고등학교 과학교사와 고등학교 3학년 학생 763명을 연구 대상으로 선정하여, 설문 조사를 실시하였다. 연구 결 과, 과학과 선택과목의 제시 방법은 인문과정의 경우 택일방식과 집단선택 방식이 많았고, 자연과정의 경우 택 일방식과 자유선택 방식이 많았다. 즉, 제한된 범위 내에서 선택권을 주는 경우가 많았다. 선택중심 교육과정 에 대한 과학교사의 인식을 조사한 결과, 부정적인 의견이 많았고, 특히 지구과학 교사가 가장 부정적인 의견 을 보이고 있었다. 그리고 학생의 교과 선택권에 대해서 생물교사와 화학교사는 찬성하는 의견이 많았으나, 물 리교사와 지구과학교사는 반대하는 의견이 더 많았다. 학생들이 올바르게 선택과목을 선택하기 위해서는 선택 과목별로 불이익이 없도록 입시 제도를 보완해야 한다는 의견과 체계적이고 현장성 있는 진로교육이 필요하 다는 의견이 많았다. 선택중심 교육과정에 대해 고등학교 3학년 학생들의 인식을 조사한 결과, 그다지 만족하 지 못하고 있는 경향을 보였는데, 그 이유로는 선택권이 제한적이라는 의견과 선택과목과 진로에 대한 홍보와 교육이 부족하다는 의견이 많았다. 이러한 결과로 볼 때, 학교 현장에서는 학생들의 선택과 과학교사 수급을 원활히 조정하고자 노력하고 있으나 모든 요구를 수용하기에는 한계가 있다. 따라서 기초과학이 소외되거나 과 학과목에 대한 학력저하가 없도록 함과 동시에 학교 현장의 실정을 감안하여 학생의 요구와 과학교사 수급 문 제를 원활히 해결할 수 있는 대책과 보완이 필요하다.

COATED PARTICLE FUEL FOR HIGH TEMPERATURE GAS COOLED REACTORS

  • Verfondern, Karl;Nabielek, Heinz;Kendall, James M.
    • Nuclear Engineering and Technology
    • /
    • 제39권5호
    • /
    • pp.603-616
    • /
    • 2007
  • Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

상추 중 Lambda-cyhalothrin과 Deltamethrin의 잔류 특성 (Residual Characteristics of Lambda-cyhalothrin and Deltamethrin in Lettuce)

  • 윤상순;심석원;김광일;안명수;윤택한;김윤정;황효선;진충우;한상국;오상균;신종호;진용덕;이은영
    • 농약과학회지
    • /
    • 제12권2호
    • /
    • pp.148-154
    • /
    • 2008
  • 상추의 안전한 생산을 위한 재배기간 중 농약 잔류량 변화추이와 최종 소비단계에서의 농산물 안전성 평가 자료로 활용하기 위하여 lambda-cyhalothrin과 deltamethrin의 기준량 및 배량을 각각 상추에 살포한 후 시료를 경시적으로 채취하여 GC-ECD로 잔류 농약을 분석하였다. 시험 농약의 검출한계는 모두 $0.001\;mg{\cdot}kg^{-1}$ 이었으며 분석법의 회수율은 $0.2\;mg{\cdot}kg^{-1}$ 수준에서 101.2-104.3%, $1.0\;mg{\cdot}kg^{-1}$ 수준에서 99.7-103.8% 이었다. 각 약제의 상추 중 잔류량은 시간이 경과함에 따라 점차 감소하는 것으로 나타났으며, lambda-cyhalothrin과 deltamethrin의 생물학적 반감기는 기준량 살포의 경우 1.7일과 1.4일, 배량 살포의 경우는 1.8일과 1.4일 이었다. Lambda-cyhalothrin과 deltamethrin의 초기 잔류량은 모두 잔류 허용기준 이상이었으나 수확예정 일의 잔류농도는 모두 잔류허용기준 미만이었으며, 수확예정 일의 잔류량으로 산출한 시험 농약의 ADI 대비 EDI의 비율은 기준량과 배량 처리구에서 모두 1% 미만이었다.

AFLP 표지자에서 나타난 전라남도 부안의 북방한계지에 자생하는 호랑가시나무 군락의 유전적 단형성 (Genetic Monomorphism of the Natural Ilex cornuta Community at the Northern Range Limit in Buan, Jeollanam-do in Korea Revealed by AFLP Markers)

  • 홍경낙;박유진;이제완;김영미
    • 한국산림과학회지
    • /
    • 제104권2호
    • /
    • pp.187-192
    • /
    • 2015
  • 한 지역의 특수한 환경에 오랫동안 반복적으로 노출된 집단의 개체가 지닌 지역적응성(local adaptation)은 육종이나 유전자원보존, 진화생물학적 측면에서 가치가 높으며, 북방한계지의 집단은 이러한 적응 유전형질이 발현될 가능성이 높은 곳 중 하나이다. 호랑가시나무의 북방한계지인 전라북도 변산반도의 부안 도청리 호랑가시나무 군락(천연기념물 제122호)은 성목 744본과 치수 211본(이하 군락)으로 구성되며, 인접지에 후계목 유도를 위해 85본(이하 식재림I) 및 27본(이하 식재림II)이 식재되어 있다. 총 85개체의 엽시료를 채취하여 유전변이 분석을 실시하였는데 AFLP primer 4조합에서 얻은 143개 증폭산물중 다형성 유전자좌는 52개(36%)였다. 85개체는 13개 유전자형으로 나뉘었는데, 군락의 성목과 치수 52개체는 모두 동일한 유전자형을 갖고 있으며, 식재림I과 식재림II는 각각 7개와 5개의 유전자형을 보유했다. 군락과 식재림(I과 II)간 또는 두 식재림간 공통된 유전자형은 관찰할 수 없었으며, 군락과 식재림I, 식재림II에서 해당 그룹에서만 고유하게 관찰되는 유전자좌는 각각 2개, 6개, 4개로 나타나서 이들의 유전적 기원에 상당한 차이가 있을 것으로 생각된다. 두 식재림은 수령이 다를 뿐 아니라 유전적 구성의 차이도 뚜렷해서 서로 다른 경로를 거쳐 조성된 것으로 추정된다. 도청리 군락에서 유전적으로 동일한 수그루만 관찰됐다는 사실과 삽목은 물론 취목에 의한 영양번식도 용이한 점을 고려하면, 군락은 암나무의 선별적 굴취에 따른 결과가 아니라 수나무의 근맹아 발생에 의해 이루어진 클론개체(genet)일 가능성이 크다.

하수슬러지의 차수재 및 복토재로의 이용타당성에 관한 연구 (A Feasibility Study on the Use of Liner and Cover Materials Using Sewage Sludge)

  • 유남재;김영길;박병수;정하익
    • 한국지반공학회논문집
    • /
    • 제15권2호
    • /
    • pp.43-71
    • /
    • 1999
  • 본 연구는 하수처리장 슬러지를 사용하여 매립지의 복토재 및 차수재의 건설재료로 개발하기 위하여 수행한 실험의 분석결과이다. 하수슬러지에 그의 지반공학적 물성증진을 위하여 화강토와 화력발전소의 부산물인 플라이애쉬를 주첨가물로 사용하고 부첨가물로 시멘트 및 벤토나이트를 소정의 혼합비율로 섞어서 각각 전단강도 증진과 투수계수 감소효과를 도모하였다. 주재료인 하수슬러지와 첨가재의 혼합비율을 변화시킨 혼합물에 대하여 다양한 실내실험을 수행하여 복토재 및 차수재의 설계기준의 적합성 여부를 조사하였다. 각 주재료, 첨가재, 혼합물의 비중, 입도분석, 액\ulcorner소성한계 실험을 실시하여 기본물성을 구하고 그들이 투수성, 다짐성, 압축성, 전단강도에 미치는 영향에 대하여 분석하였다. 혼합물에 대하여 실내다짐시험을 실시하여 최대건조단위중량과 최적함수비를 구하고 현장 다짐효율성을 평가하였다. 다짐혼합시료에 대하여 변수두 투수시험을 실시하여 투수계수를 구하는 한편 변수두 투수시험을 하중제어식 압밀시험중에 병행 실시하여 그들의 압밀정수 및 투수계수를 측정하였다. 슬러지의 장기적 안정성과 관련하여 크리프실험을 변수두 투수시험과 함께 실시하였다. 한편, 한달간을 부패시킨 다짐시료에 대하여 투수시험을 실시하여 슬러지내 유기물질 부패에 의한 투수계수에 미치는 영향에 대하여 고찰하였다. 슬러지에 화강토, 플라이애쉬, 벤토나이트를 일정비율로 섞은 혼합물에 대하여 직접전단시험을 실시하여 전단강도정수를 구하였다. 시멘트와 혼합한 슬러지에 대하여 일축압축 강도시험을 실시하여 혼합비와 재령기간에 따른 압축강도 변화를 분석하였다. 한편, 다짐혼합시료에 대하여 CBR시험을 수행하여 그들의 주행성에 대한 평가를 실시하였다. 이와 같은 다양한 실험결과를 종합분석하여 매립지의 차수재 및 복토재로서 사용조건 만족여부를 검토하였다.

  • PDF

호두나무 주요 재배지역의 생산비 분석 (Analysis of Production Cost of Walnut Tree Cultivation in Major Cultivating Regions)

  • 김재성;이욱
    • 한국산림과학회지
    • /
    • 제99권4호
    • /
    • pp.611-617
    • /
    • 2010
  • 본 연구는 호두나무 재배의 생산비를 파악하기 위해 호두나무 재배임가 163호를 대상으로 조사하였으며 분석 결과는 다음과 같다. 국내 호두나무 재배 임가는 평균 0.7를 재배하고 있었으며, 식재 본수는 ha당 평균 204본으로 표준식재 본수(100본) 대비 밀식재배를 하고 있는 것으로 나타났다. 지역별로 가장 많이 재배되고 있는 품종으로는 충북지역 상촌 65.7%, 충남지역 광덕 68.6%, 전북지역 상촌 98.0%, 경북지역 대부 61.2%를 가장 많이 재배하고 있었다. 호두 생산을 위해 투입된 생산비용은 조성비(292천원/ha), 중간재비(3,682천원/ha), 임차료(103천원/ha), 고용노동비(653천원/ha) 등의 경영비용(4,436천원/ha)과 내급비에 자가노동비(5,834천원)/ha, 토지용역비(490천원/ha), 고정자본용역비(834천원/ha), 유동자본용역비(234천원/ha) 등으로 구분된다. 호두 생산비용으로 총 11,828천원을 투입하여 평균 11,586천원/ha(소득률 72.3%)의 소득을 올렸으며, 순수익은 4,196천원/ha(순수익률 26.2%)을 나타내 높은 소득액을 나타냈다. 생산된 호두의 판매는 농협 39.8%, 도매상 20.8%, 수집상 19.8% 등에 판매하고 있으나 최근에는 소비자에게 직접 판매하는 물량이 증가하면서 18.9%에 달하였다. 호두나무는 유휴토지의 활용 차원에서 재배면적이 소규모이며, 겸업적 경영을 하는 특성으로 지역별 생산정책 및 산업육성대책 수립 방안을 모색하는데 한계를 갖고 있다. 따라서 전업 임가를 대상으로 기초적인 데이터베이스(DB) 구축이 이루어진다면 수입산 호두와의 차별성이 강화될 뿐만 아니라 발전된 새로운 유통시스템으로의 전환이 가능하게 될 것이며, 이를 통해 임가의 가계소득 증가에도 크게 기여 할 것으로 기대된다.

10MV 이상 고에너지 사용시 wedge filler의 방사화가 작업환경에 미치는 영향평가 (Evaluation on the radiation exposure from activated wedge filter)

  • 이화중;김대영;김원택
    • 대한방사선치료학회지
    • /
    • 제16권2호
    • /
    • pp.69-79
    • /
    • 2004
  • 목적 : 10MV 이상의 고 에너지를 사용할 경우 X선에 의해 광중성자(Photoneutron)가 발생되고 이 중성자는 주변 물질을 방사화(Activation)시켜 Beam-off기간에도 방사화된 물질의 유도 방사선(Induced radiation)에 의해 작업자의 피폭을 유발할 수 있다. 특히, 방사화된 물질중 방사선 치료시 작업자가 직접 손으로 접촉하는 wedge filter의 방사화를 알아보기 위해 10MV Siemens 가속기와 15MV Siemens 가속기에서 5Gy 조사 후 wedge filter에서 방사선량을 측정하여 방사선 발생 메커니즘을 확인하고, 선량측정을 통해 방사선 작업종사자의 작업환경에 미치는 영향을 평가하고자 한다. 대상 및 방법 : 본 연구에서 사용한 방사선 치료용 선형가속기는 Siemens사의 10MV Primus, Siemens사의 15MV Primus를 사용하였다. Siemens사의 Wedge filter를 사용하였으며, Wedge의 재질은 Fe, Wedge holder는 Al이다. 선량측정은 GM-측정기인 RDS-110 Model을 이용하였다. 본 실험에 사용된 GM-측정기는 $50keV{\sim}1.25MeV$의 X-ray가 측정가능하며, $0.05{\mu}Sv/hr{\sim}100mSv/hr$까지 측정이 가능하다. GM survey meter를 사용하여 환자 대기실과 건물 밖, 두 지점의 자연 방사선량을 측정하여 background값으로 사용하였다. 광중성자를 발생시키고, 또한 방사화를 진행시키기 위해 wedge를 장착한 상태에서 10MV X선, 15MV X선을 5Gy(500MU)를 조사하였고, beam-off직후 wedge filter를 가속기로부터 분리시켜 GM survey meter를 이용하여 wedge filter 중심부분에서 30초 단위로 방사선량을 측정하였다. 결과 : Primus 10MV의 경우 H병원에서 측정을 수행했으며, $0{\times}0cm^2,\;5{\times}5cm^2,\;25{\times}25cm^2$ Field size에 대하여 500MU 조사 후 방사선량의 측정결과 Field size의 영향은 거의 존재하지 않았으며, beam off 후 $1{\sim}2$분 뒤 측정 시작 시점에서 대략 $1{\mu}Sv/hr$를 나타냈으며, 반감기는 약 $3{\sim}4$분인 것으로 측정되었다. Primus 15MV의 경우 S병원에서 측정을 수행하였으며, $25{\times}25cm^2$ Field size에 대하여 500MU 조사 뒤 방사선량을 측정한 결과, beam off후 $1{\sim}2$분 뒤 측정시점에서 대략 $3.26{\mu}Sv/hr$를 나타냈으며 10MV X선보다 대략 3.3배 큰 값을 나타내었다. 결과 : 일일 치료환자가 $20{\sim}50$명이고, 환자 1인당 Wedge filter의 교체작업이 $1{\sim}2$회일 때 10MV의 경우 연간선량이 $0.08{\sim}0.4mSv$로 평가되었으며, 15MV의 경우 $0.27{\sim}1.36mSv$로 평가되어 작업종사자의 연간 허용선량인 20mSv에 비해 안전한 것으로 평가되었다.

  • PDF

결핵예방법의 격리명령의 실행과 한계에 관하여 (The Implementation and limits of Involuntary Detention of the Tuberculosis Prevention Act)

  • 김장한
    • 의료법학
    • /
    • 제16권2호
    • /
    • pp.55-84
    • /
    • 2015
  • 일반적으로 결핵은 기침, 대화, 노래 부르기와 같은 일상적인 생활에서 전파되는데, 전염성 결핵 환자는 1년 동안 10명 이상의 사람을 감염시킨다고 한다. 우리 사회로부터 결핵을 퇴치하기 위해서는 전염원이 되고 있는 결핵 환자에 대한 치료와 관리가 필수적이며, 의료진의 치료 지시에 불응하는 환자는 본인의 건강과 공중 보건 측면에서 큰 문제가 된다. 일차적으로는 결핵균을 외부로 배출하는 결핵 감염 환자가 문제이지만, 이차적으로는 치료에 의하여 감염성이 일시적으로 없어진 경우라도, 지속적인 치료를 받지 않으면, 예컨대 결핵 약을 복용하지 않으면 결핵이 재발할 가능성이 높은 결핵 환자라면, 치료 불응이 개인과 공중보건에 잠재적 위험이 될 수 있다. 결핵 환자가 의료진의 치료 지시 또는 권유에 불응한다면, 의료적 조치는 공적인 강제력과 결합하게 된다. 결핵은 환자 개인의 문제가 아니라 공중보건에 위해를 일으키는 감염병이기 때문에, 환자의 치료 거부권은 공공복리를 위한 기본권 제한 사유(헌법 제37조 제2항)가 되는 것이다. 다만 환자에 대하여 강제력을 부가하는 경우에도, 시행하고자 하는 강제의 방법에 따라 기본권의 제한의 정도가 다를 수 있다. 일반적으로 강제 구금과 같은 신체의 자유에 대한 강한 제한을 시행하기 이전에, 약한 정도의 제한이 가해지는 직접복약확인치료(Directly Observed Therapy, DOT)와 같이 환자가 자신이 약을 복용하는 것을 약속하고, 직접 의료진이 확인함으로써, 치료 순응도를 확인하고 환자의 자유를 좀 더 보장하는 것이 강제 구금과 같은 강한 기본권 제한 방법보다 좋을 것이라는 점은 일응 타당하다. DOT 치료에 대하여 순응하지 않거나, 기존에 환자가 보여 주었던 태도에 비추어 치료에 불순응할 것으로 강하게 예측되는 경우라면, 의료진은 환자를 강제 구금하고 치료하는 방법을 취하게 될 것이다. 우리나라의 결핵 예방법은 강제 구금과 관련하여, 두 단계의 명령 제도를 가지고 있는데, 첫째는 입원명령제도(결핵예방법 제15조)이고, 둘째는 격리명령제도(결핵명령법 제15조의2)이다. 본 논문에서는 강제 구금 명령에서 가장 기본권 제한의 정도가 심한 격리 명령을 분석하는 것인데, 이를 위하여 입원명령과 격리 명령의 차이점을 살펴보고, 이를 통하여 치료 불순응 결핵 환자에 대한 강제 조치로서 격리 명령 제도의 실행 방안과 실행에 있어서 법적 한계를 다루고자 하는 것이다.

  • PDF

일산화탄소중독(一酸化炭素中毒)의 진료대책(診療對策) 수립(樹立)을 위한 추계학적(推計學的) 연구(硏究) (A Stochastic Study for the Emergency Treatment of Carbon Monoxide Poisoning in Korea)

  • 김용익;윤덕로;신영수
    • Journal of Preventive Medicine and Public Health
    • /
    • 제16권1호
    • /
    • pp.135-152
    • /
    • 1983
  • Emergency medical service is an important part of the health care delivery system, and the optimal allocation of resources and their efficient utilization are essentially demanded. Since these conditions are the prerequisite to prompt treatment which, in turn, will be crucial for life saving and in reducing the undesirable sequelae of the event. This study, taking the hyperbaric chamber for carbon monoxide poisoning as an example, is to develop a stochastic approach for solving the problems of optimal allocation of such emergency medical facility in Korea. The hyperbaric chamber, in Korea, is used almost exclusively for the treatment of acute carbon monoxide poisoning, most of which occur at home, since the coal briquette is used as domestic fuel by 69.6 per cent of the Korean population. The annual incidence rate of the comatous and fatal carbon monoxide poisoning is estimated at 45.5 per 10,000 of coal briquette-using population. It offers a serious public health problem and occupies a large portion of the emergency outpatients, especially in the winter season. The requirement of hyperbaric chambers can be calculated by setting the level of the annual queueing rate, which is here defined as the proportion of the annual number of the queued patients among the annual number of the total patients. The rate is determined by the size of the coal briquette-using population which generate a certain number of carbon monoxide poisoning patients in terms of the annual incidence rate, and the number of hyperbaric chambers per hospital to which the patients are sent, assuming that there is no referral of the patients among hospitals. The queueing occurs due to the conflicting events of the 'arrival' of the patients and the 'service' of the hyperbaric chambers. Here, we can assume that the length of the service time of hyperbaric chambers is fixed at sixty minutes, and the service discipline is based on 'first come, first served'. The arrival pattern of the carbon monoxide poisoning is relatively unique, because it usually occurs while the people are in bed. Diurnal variation of the carbon monoxide poisoning can hardly be formulated mathematically, so empirical cumulative distribution of the probability of the hourly arrival of the patients was used for Monte Carlo simulation to calculate the probability of queueing by the number of the patients per day, for the cases of one, two or three hyperbaric chambers assumed to be available per hospital. Incidence of the carbon monoxide poisoning also has strong seasonal variation, because of the four distinctive seasons in Korea. So the number of the patients per day could not be assumed to be distributed according to the Poisson distribution. Testing the fitness of various distributions of rare event, it turned out to be that the daily distribution of the carbon monoxide poisoning fits well to the Polya-Eggenberger distribution. With this model, we could forecast the number of the poisonings per day by the size of the coal-briquette using population. By combining the probability of queueing by the number of patients per day, and the probability of the number of patients per day in a year, we can estimate the number of the queued patients and the number of the patients in a year by the number of hyperbaric chamber per hospital and by the size of coal briquette-using population. Setting 5 per cent as the annual queueing rate, the required number of hyperbaric chambers was calculated for each province and for the whole country, in the cases of 25, 50, 75 and 100 per cent of the treatment rate which stand for the rate of the patients treated by hyperbaric chamber among the patients who are to be treated. Findings of the study were as follows. 1. Probability of the number of patients per day follows Polya-Eggenberger distribution. $$P(X=\gamma)=\frac{\Pi\limits_{k=1}^\gamma[m+(K-1)\times10.86]}{\gamma!}\times11.86^{-{(\frac{m}{10.86}+\gamma)}}$$ when$${\gamma}=1,2,...,n$$$$P(X=0)=11.86^{-(m/10.86)}$$ when $${\gamma}=0$$ Hourly arrival pattern of the patients turned out to be bimodal, the large peak was observed in $7 : 00{\sim}8 : 00$ a.m., and the small peak in $11 : 00{\sim}12 : 00$ p.m. 2. In the cases of only one or two hyperbaric chambers installed per hospital, the annual queueing rate will be at the level of more than 5 per cent. Only in case of three chambers, however, the rate will reach 5 per cent when the average number of the patients per day is 0.481. 3. According to the results above, a hospital equipped with three hyperbaric chambers will be able to serve 166,485, 83,242, 55,495 and 41,620 of population, when the treatmet rate are 25, 50, 75 and 100 per cent. 4. The required number of hyperbaric chambers are estimated at 483, 963, 1,441 and 1,923 when the treatment rate are taken as 25, 50, 75 and 100 per cent. Therefore, the shortage are respectively turned out to be 312, 791. 1,270 and 1,752. The author believes that the methodology developed in this study will also be applicable to the problems of resource allocation for the other kinds of the emergency medical facilities.

  • PDF