• 한국해양공학회지
• /
• 제20권4호
• /
• pp.58-63
• /
• 2006

When the costal zone surrounded by a breakwater has a narrow vertical opening, currents in the vicinity of a narrow entrance can result in a jet flow, coinciding with the tide. Such a Tidal-Jet Generator(TJG) can change the water mass distribution and transport processes in the domain of influence of the jet. Also, it can decrease the residual time of them. In the present study, the water purification utilizing tidal jets in the coastal zone over constant bathymetry are estimated numerically, using a finite-difference numerical scheme, named the NS-MAC-TIDE method, which isbased on the fully 3D Navier-stokes(NS) equations. The shear velocity near the inlet of the TJG are predicted from the flow field simulation, and are assessed qualitatively with the development of scouring or sediment that is caused by the change of diffusion or sweeping flowup from the seabed of sediment particles. Finally, through solving a transport equation of concentration, the residual time related on mass transport processes and the flushing mechanism for water purification are investigated.

• Structural Engineering and Mechanics
• /
• 제29권2호
• /
• pp.135-154
• /
• 2008

The moving vehicle loads on a bridge deck is one of the most important live loads of bridges. They should be understood, monitored and controlled before the bridge design as well as when the bridge is open for traffic. A MOM-based algorithm (MOMA) is proposed for identifying the timevarying moving vehicle loads from the responses of bridge deck in this paper. It aims at an acceptable solution to the ill-conditioning problem that often exists in the inverse problem of moving force identification. The moving vehicle loads are described as a combination of whole basis functions, such as orthogonal Legendre polynomials or Fourier series, and further estimated by solving the new system equations developed with the basis functions. A number of responses have been combined, some numerical simulations on single axle, two axle and multiple-axle loads, being either constant or timevarying, have been carried out and compared with the existing time domain method (TDM) in this paper. The illustrated results show that the MOMA has higher identification accuracy and robust noise immunity as well as producing an acceptable solution to ill-conditioning cases to some extent when it is used to identify the moving force from bridge responses.

• 한국해양공학회지
• /
• 제26권1호
• /
• pp.70-77
• /
• 2012

In this study, a numerical analysis of offshore installation using a floating crane with heave compensator is carried out in time domain. The motion analysis of crane vessels is based on floating body dynamics using convolution integral and the crane wire is treated as simple spring. The lifted structure is assumed as a rigid body with 3 degree-of-freedom translational motion. The heave compensator is numerically modelled by the generalized spring-damper system. Firstly, forced motion simulations of crane wire system are carried out to figure out the basic principle of heave compensator. The transfer function of crane wire system is obtained and effective wave period of heave compensator are found. Then, coupled analysis of crane vessel, crane wire, and lifted structure are performed in regular and irregular sea conditions. Two different crane vessels and two lifted structures (suction pile and manifold) are considered in this study. Through a series of numerical calculations, the effective zone of heave compensator is investigated with respect to wave period and crane wire length.

• Ocean Systems Engineering
• /
• 제7권1호
• /
• pp.1-19
• /
• 2017

This paper presents the numerical simulation results for the dynamic responses of two types of submerged floating tunnels (SFT) under wave and/or seismic excitations. Time domain simulations are conducted by the commercial program OrcaFlex (OF) and in-house CHARM3D program (CP). The dynamic performances of a short/rigid/free-end SFT section with vertical and inclined mooring lines are evaluated. The SFT numerical models were validated against Oh et al.'s (2013) model test results under regular wave conditions. Then the numerical models were further applied to the cases of irregular waves or seismic motions. The main results presented are SFT surge/heave motions and mooring tensions. The general trends and magnitudes obtained by the two different software packages reasonably agree to each other along with experimental results. When seabed seismic motions are applied to the SFT system, the dynamic responses of SFTs are small but dynamic mooring tension can significantly be amplified. In particular, horizontal earthquakes greatly increase the dynamic tension of the inclined mooring system, while vertical earthquakes cause similar effect on vertical mooring system.

• 한국지진공학회논문집
• /
• 제21권5호
• /
• pp.255-264
• /
• 2017

Dynamic numerical simulation of pile-supported slab track system embedded in a soft soil and embankment was performed. 3D model was formulated in a time domain to consider the non-linearity of soil by utilizing FLAC 3D, which is a finite difference method program. Soil non-linearity was simulated by adopting the hysteric damping model and liner elements, which could consider soil-pile interface. The long period seismic loads, Hachinohe type strong motions, were applied for estimating seismic respose of the system, Parametric study was carried out by changing subsoil layer profile, embankment height and seismic loading conditions. The most of horizontal permanent displacement was initiated by slope failure. Increase of the embedded height and thickness of the soft soil layer leads increase of member forces of PHC piles; bending moment, and axial force. Finally, basic guidelines for designing pile-supported slab track system under seismic loading are recommended based on the analysis results.

• 대한공간정보학회지
• /
• 제18권4호
• /
• pp.21-30
• /
• 2010

본 연구에서는 기존에 개발된 GIS 기반의 분포형 강우유출모형(K-DRUM)이 대유역에서 많은 계산시간을 요구하는 단점이 있기 때문에 이를 개선하기 위하여 MPI(Message Passing Interface)기법을 적용한 병렬 K-DRUM모형을 개발하였다. K-DRUM 모형은 홍수기동안의 지표흐름과 지표하 흐름의 시간적 변화와 공간적 분포를 모의할 수 있으며, 전처리과정으로서 ArcView를 이용하여 모형에 필요한 ASCII형태의 입력 매개변수 자료들을 가공하였다. 개발된 병렬 K-DRUM 모형을 이용하여 남강댐유역에서 2006년 태풍 '에위니아' 사상을 대상으로 다양한 영역분할을 통한 유출계산 검토를 하였다. 영역분할 개수에 따른 병렬화 효과를 검토하기 위하여 분할 개수를 1개에서 25개까지 증가시키며 클러스터 시스템에서 유출모의를 수행하였다. 모의결과 영역분할 개수가 증가할수록 컴퓨터 메모리의 개수가 감소하게 되고, 이에 따라 모의수행시간 역시 감소함을 알 수 있었다. 또한 본 연구에서 영역분할 계산방식을 채택함에 따라 영역의 접합부분에서 발생 가능한 유출량 계산오차를 최소화하기 위한 기법을 제시하였다. 유출량 계산오차 발생을 최소화하기 위해서는 단위 계산시간당 영역간 정보교환과 내부유출량 계산을 최소3회 반복하여야 함을 알 수 있었다.

• 한국해양공학회지
• /
• 제7권2호
• /
• pp.114-120
• /
• 1993

Responses of marine vehicles and ocean structures in a seaway can be predicted by applying the probabilistic approach. When we consider a linear system, the responses in a random seaway can be evaluated through spectral analysis in the frequency domain. But when we treat nonlinear system in irregular waves, it is necessary to get time history of waves. In the previous study we introduced one-directional waves (long crested waves)as wave environment and carried out calculations and experiments in the waves. But the real sea in which marine vehicles and structures are operated has multi-directional waves (short crested waves). It is important to get a simulated random sea and analyse dynamic problems in the sea. We need entire sample function or probabillty density function to infer statistical value of random process. However if the process are ergodic process, we can get statistical values by analysis of one sample function. In this paper, we developed the simulation technique of multi-directional waves and proved that the time history given by this method keep ergodic characteristics by the statistical analysis.

• 한국전산구조공학회논문집
• /
• 제32권2호
• /
• pp.103-108
• /
• 2019

본 논문에서는 비평형 분자동역학 시뮬레이션 기법을 사용하여 알루미늄 박막과 실리콘 웨이퍼 간 열경계저항을 예측하였다. 실리콘의 끝 단 고온부에 열을 공급하고, 같은 양의 열을 알루미늄 끝 단 저온부에서 제거하여 경계면을 통한 열전달이 일어나도록 하였으며, 실리콘 내부와 알루미늄 내부의 선형 온도 변화를 계산함으로써 경계면에서의 온도 차이에 따른 열저항 값을 구하였다. 300K 온도에서 $5.13{\pm}0.17m^2{\cdot}K/GW$의 결과를 얻었으며, 이는 열유속 조건의 변화와 무관함을 확인하였다. 아울러, 펨토초 레이저 기반의 시간영역 열반사율 기법을 사용하여 열경계저항 값을 실험적으로 구하였으며, 시뮬레이션 결과와 비교 검증하였다. 전자빔 증착기를 사용하여 90nm 두께의 알루미늄 박막을 실리콘(100) 웨이퍼 표면에 증착하였으며, 유한차분법을 이용한 수치해석을 통해 열전도 방정식의 해를 구해 실험결과와 곡선맞춤 함으로써 열경계저항을 정량적으로 평가하고 나노스케일에서의 열전달 현상에 관한 특징을 살펴보았다.

• 한국지반공학회논문집
• /
• 제32권4호
• /
• pp.5-14
• /
• 2016

건조토 지반에 근입된 지반-말뚝 시스템의 동적 거동을 정확히 예측하기 위해 3차원 수치 모델링을 수행하였다. 제안된 모델은 강진 시 지반의 비선형 거동을 적절하게 모사하기 위해 상용 유한 차분 프로그램인 FLAC3D를 이용하여 시간 영역에서 해석이 수행되었다. 모델링 방법론으로써 지반 구성 모델은 Mohr-Coulomb 탄소성 모델을 적용하였으며 지반 전단 탄성 계수의 비선형적인 감소를 모사할 수 있는 이력 감쇠 모델을 적용하였다. 진동 시 지반-말뚝 간의 완전 접촉, 미끄러짐, 분리 현상을 모두 모사하는 경계요소 모델을 적용하였으며 경계요소 모델을 구성하는 스프링 계수는 탄성이론에 기초하여 결정되어, 내장 함수인 FISH를 통해 깊이에 따라 연속적으로 입력되었다. 경계 조건의 경우, 지반-말뚝 상호작용의 영향을 받는 근역 지반만 메쉬를 생성하고 근역 지반의 경계부에 원역 지반의 가속도-시간 이력을 입력하는 방식인 단순화 연속체 모델링 기법(Kim et al., 2012)을 적용함으로써 해석 효율을 증가 시키고자 하였으며 적절한 최대지반탄성계수와 항복 깊이의 설정으로 지반의 비선형 거동을 더욱 정확히 모사하고자 하였다. 수치 해석의 오차를 최소화하고 모델의 신뢰성을 확보하기 위해, Yoo(2013)이 수행한 원심모형시험 결과와 수치 해석 결과와의 비교를 통해 제안된 기법의 캘리브레이션을 수행하였으며, 말뚝 최대 휨 모멘트와 말뚝 횡방향 최대 변위의 깊이 별 분포가 다양한 입력 하중 조건에서 실험 결과를 적절히 모사하고 있는 것을 확인하였다. 또한, 제안된 수치 모델의 적용성 평가를 위해 다른 실험 결과와의 비교 검증을 수행하였다.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.58-66
• /
• 2005

Pseudo-Near Field Recording (Pseudo-NFR) system is proposed to prevent contamination and oxidation of media surface occurred in conventional NFR systems. To solve these critical problems of the NFR systems, we investigate the optimal thickness of cover layer for Pseudo NFR. This paper presents the theoretical analysis for cover layer thickness based on the measured length of dust particle and numerical simulation for the temperature distribution using Finite Difference Time Domain (FDTD) method and heat conduction equation. To verify the simulation results, we conduct and compare simulation results in case of far field MO recording and near field MO recording. A measured dust particle length in general environment was mostly less than $20{\mu}m$, and the optimal thickness of cover layer is $30{\mu}m$ in this case. Based on the designed optimal cover layer thickness, temperature distribution is simulated to have $800{\~}850^{\circ}C$.