• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.48-51
• /
• 2004

The estimation of NC machining time is of significance since it provides shop floor engineers with information for the determination of the productivity of the floor as well as process schedules. The NC machining time commonly depends on NC programs since they have various important information such as tool positions, feed rates, and other miscellaneous functions. Thus, nominal NC machining time can be easily acquired based on the programs. Actual machining time, however, cannot be simply obtained because of the dynamic characteristics of a NC machine controller such as acceleration and deceleration. Hence, this study presents a NC machine time estimation model for sculptured surfaces, considering the dynamic characteristics. The estimation model uses the distribution of NC blocks according to a factor influencing the machining time. Finally, machining time is estimated by a statistical machining time estimation model representing the relationship between the block distribution and the machining time. The parameters in the model are searched out by a genetic algorithm.

• Structural Engineering and Mechanics
• /
• 제56권2호
• /
• pp.257-273
• /
• 2015

Numerical value of correlation between effective parameters in the strength of a structure is as important as its stochastic properties in determining the safety of the structure. In this article investigation is made about the variation of coefficient of correlation between effective parameters in corrosion initiation time of reinforcement and the time of concrete cover cracking in reinforced concrete (RC) structures. Presence of many parameters and also error in measurement of these parameters results in uncertainty in determination of corrosion initiation and the time to crack initiation. In this paper, assuming diffusion process as chloride ingress mechanism in RC structures and considering random properties of effective parameters in this model, correlation between input parameters and predicted time to corrosion is calculated using the Monte Carlo (MC) random sampling. Results show the linear correlation between corrosion initiation time and effective input parameters increases with increasing uncertainty in the input parameters. Diffusion coefficient, concrete cover, surface chloride concentration and threshold chloride concentration have the highest correlation coefficient respectively. Also the uncertainty in the concrete cover has the greatest impact on the coefficient of correlation of corrosion initiation time and the time of crack initiation due to the corrosion phenomenon.

• 한국보건간호학회지
• /
• 제2권2호
• /
• pp.21-44
• /
• 1988

In Korea, fee-for service reimbursement has been adopted from the begining of medical insurance system in 1977, and the importance of the relative value unit is currently being investigated. The purpose of this study was to find out the level of propriety of the difference in the fees for different surgical services, and the appropriateness of the classification of the insurance fee schedule. For the purpose of this study, specific subjects and the procedural methodology is shown as follows: 1. The propriety of the Relative Price System(RPS). 1) Choice of sample operations. In this study, sample operations were selected and classified by specialists in general surgery, and the number of items they classified were 32. For the same group of operations the Insurance Fee Schedule(IFS) classified the operations into 24 separate items. In order to investigate the propriety of the RPS, one of the purpose of this study, was to examine the 24 items classified by the IFS. 2) Evaluation of the complexity of surgery. The data used in this study was collected The data used in this study was collected from 94 specialists in general surgery by mail survey from November I to 15, 1986. Several independent variables (age, location, number of bed, university hospital, whether the medical institution adopt residents or not) were also investigated for analysis of the characteristics of surgical complexity. 3) Complexity and time calculations. Time data was collected from the records of the Seoul National University' Hospital, and the cost per operation was calculated through cost finding methods. 4) Analysis of the propriety of the Relative Price System of the Insurance Fee Schedule. The Relative Price System of the sample operation was regressed on the cost, time, comlexity relative ,value system (RVS) separately. The coefficient of determination indicates the degree of variation in the RPS of the Insurance Fee Schedule explained by the cost, time, complexity RVS separately. 2. The appropriateness of the classification of the Insurance Fee Schedule. 1) Choice of sample operations. The items which differed between the classification of the specialist and the classification of medical, Insurance Fee Schedule were chosen. 2) Comparisons of cost, time and complexity between the items were done to evaluate which classification was more appropriate. The findings of the study can be summarized as follows: 1. The coefficient of determination of the regression of the RPS on-cost RVS was 0.58, on time RVS was 0.65, and on complexity RVS was 0.72. This means that the RPS of Insurance Fee Schedule is improper with respect to the cost, time, complexity separately. Thus this indicates that RPS must be re-shaped according to the standard element. In this study, the correlation coefficients of cost, time, complexity Relative Value System were very high, and this suggests that RPS could be reshaped I according to anyone standard element. Considering of measurement, time was thought to be the most I appropriate. 2. The classifications of specialist and of the Insurance Fee Schedule were compared with respect to cost, time, and complexity separately. For complexity, ANOVA was done and the others were compared to the different values of different classifications. The result was that the classification of specialist was more reasonable and that the classification of Insurance Fee Schedule grouped inappropriately several into one price unit.

• International Journal of Railway
• /
• 제9권1호
• /
• pp.1-9
• /
• 2016

In order to achieve a comprehensive utilization of railway networks, it is necessary to accurately assess the timetable indicators that effect the train operation. This paper describes the parameter calibration for two timetable indicators: scheduled running time and scheduled dwell time. For the scheduled running time, an existing model is employed and the single timetable parameter (percentage of minimum running time) in that model is optimized. For the scheduled dwell time, two intrinsic characteristics: the significance of stations and the average headway at each station are proposed firstly to form a new model, and the corresponding timetable parameters (the weight of the significance and the weight of the average headway) are calibrated subsequently. The Floyd Algorithm is used to obtain the connectivity among stations, which represents the significance of the stations. A case study is conducted in a light rail transportation system with 17 underground stations. The results of this research show that the optimal value of the scheduled running time parameter can be automatically determined, and the proposed model for the scheduled dwell time works well with a high coefficient of determination and low relative root mean square error through the leave-one-out validation.

• 산업경영시스템학회지
• /
• 제3권3호
• /
• pp.35-39
• /
• 1980

Although the product line produces a large volume of goods in a relatively short time, once the product line is established there are numerous problems that arise in connection with this product line. One of these problems is the problem of balancing operations or stations in terms of equal times and in terms of the times required to meet the desered rate of production. The objective of line balancing is minimizing the idle time on the line for all combinations of work stations subject to certain restrictions. In general, there are two types of line-balancing situations : (1) assembly line balancing and (2) fabrication line balancing. Two approaches to the assembly line balancing problem have been used. The first assumes a filed cycle time and find the optimum number of work stations. The second approach to the assembly line balancing problem assumes the number of work stations to be fixed and systematically coverages on a solution which minimizes the total delay time by minimizing the cycle time. Here the cycle time is determined by the longest station time. In this paper, by using the second approach method, a general mathematical model, problem solutions, and computer program for the assembly line balancing problem is presented. Data used is obtained from the company which has been confronted with many problems arising in connection with their assembly line.

• 융합보안논문지
• /
• 제12권3호
• /
• pp.115-121
• /
• 2012

소프트웨어 고장 시간은 테스팅 시간과 관계없이 일정하거나. 단조증가 혹은 단조 감소 추세를 가지고 있다. 이러한 소프트웨어 신뢰모형들을 분석하기 위한 자료척도로 자료에 대한 추세 검정이 개발되어 있다. 추세 분석에는 산술평균 검정과 라플라스 추세 검정 등이 있다. 추세분석들은 전체적인 자료의 개요의 정보만 제공한다. 본 논문에서는 고장시간을 측정하다가 시간 절단이 될 경우에 미래의 고장 시간 예측에 관하여 연구 하였다. 곡선회귀모형에 이용되는 S곡선모형과 성장모형, 로지스틱을 이용하여 미래고장 시간을 예측하여 비교 하였다. 제안된 예측방법에서는 고장시간 자료를 이용하여 모형들에 대한 예측 값을 결정계수 와 평균제곱오차를 이용하여 비교 하고 효율적 모형을 선택 하였다.

• 한국전자파학회논문지
• /
• 제20권5호
• /
• pp.471-479
• /
• 2009

본 논문에서는 개선된 가시 트리 구조와 가시면 검색을 위해 효율적인 방법을 적용한 광선 추적법을 제안한다. 비슷한 특성을 갖는 트리의 노드를 재생성하지 않는 개선된 가시 트리 구조를 사용하였으며, 가시면 판별을 위해 묶음 광선(packet ray) 개념 검사점을 비균일하게 분포시키는 방법으로 경로 탐색 성능을 개선하였다. 충돌검사에서 묶음 광선를 사용함으로써 3.3배의 속도 개선을 이루었으며, 비균일 검사점 분포를 통해 1.11배의 성능향상을 이루었다. 본 광선추적법을 적용한 결과의 경우, 경로 손실에서 Rh4S 에러가 1.9 dB 발생하여 높은 정확도를 제공할 수 있음을 보였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권5호
• /
• pp.422-430
• /
• 2010

Purpose: The aim of this study is that we evaluate the change of the White Blood Cell(WBC) count, Absolute Neutrophil Count (ANC), Erythrocyte Sedimentation Rate (ESR) and C-reactive Protein (CRP) values, and try to make standardization for postoperative sequels before and after the oral cancer resection and reconstructive surgery. Materials and Methods: The study was comprised of 34 patients (male 15, female 19) who were diagnosed as an oral cancer and had performed ablation and reconstructive surgery at Dankook university dental hos-pital. Each blood specimen was collected from patients and estimated WBC count, Neutrophil count, ESR, CRP on first, third, fifth, seventh day efore and after surgery and analyzing inter relationship between each value. Classifying Group I (resection with reconstructive surgery patients) and Group II (resection without reconstructive surgery patients). Also classifying group A (below 4 hours of operation time), Group B (4 to 8 hours of operation time), Group C (above 8 hours of operation time), each group was analyzed and compared. The Following results were induced. Results: (1) In coefficient of correlation, the CRP and WBC has highest value except WBC count and Neutrophil count. (2) There was no significant difference any lapse in the progress between Group I and II of WBC count, Neutrophil count, but the CRP shows statistically higher level in group I than group II at immediate postoperative day, and 1 to 5 days after surgery. (3) There is no significant difference any lapse in the progress between Group A, B, C of WBC count, Neutrophil count, but CRP shows statistically significant difference in 1 day, 3 days after surgery Conclusion: It should be suggested that, determination of CRP is most valuable parameter for postopera-tive management and determination of postoperative clinical changes than other parameter such as WBC count, neutrophil count, and ESR values in oral cancer patient after resection and reconstructive surgery, based on the results of this study.

• 한국전자파학회논문지
• /
• 제27권3호
• /
• pp.307-316
• /
• 2016

다층 방어 시스템은 표적의 장거리 조기탐지를 위해 조기 경보 레이다를 활용하고, 정밀 요격 통제를 위해 대공 레이다를 활용하는 방식을 취한다. 그러므로 레이다들 사이에 표적 인계 과정을 필요로 하게 되는데, 추적의 안정화 및 교전 통제를 고려하여 적절한 시점에 표적 인계가 이루어져야 한다. 본 논문에서는 다층 레이다 시스템의 운용 특성을 분석하고, 고속표적에 효과적으로 대응하기 위한 추적 성능 예측 기반의 표적 인계 시점 결정기법을 제안하였다. 또한, 탄도탄 방어 시나리오를 포함하는 통합 시뮬레이터 환경에서 제안 기법을 검증하였다.

• 지질공학
• /
• 제25권1호
• /
• pp.103-113
• /
• 2015

본 연구에서는 신호 대 잡음비가 낮은 미소파괴음 신호에 대한 진원 위치표정 결과의 정확성 향상을 위하여 가변창문함수를 이용한 P파 도달시간 결정 알고리즘을 제안하였다. 제안된 알고리즘은 기존 P파 도달시간 결정알고리즘과 함께 신호 대 잡음비(SNR)가 각기 다른 가상의 미소파괴음 신호에 적용하여 정확성을 검토하였다. 실험결과 기존 P파 도달시간 결정알고리즘은 SNR이 낮아질수록 결과의 정확성이 낮아지며 특히 SNR이 2.14에서는 모든 알고리즘에서 오류가 발생하였다. 반면에, 제안된 알고리즘은 신호의 분산을 고려한 가변창문함수를 신호에 적용하기 때문에 신호의 주파수특성과 신호의 증폭을 동시에 고려하였다. 따라서 SNR 2.14 이하의 신호에서도 제시된 알고리즘은 정확한 결과를 제시하였다.