• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.5
• /
• pp.1039-1049
• /
• 2015

The inflow estimation at large multipurpose dam reservoir is carried out by considering the water balance among the discharge, the storage change during unit time interval obtained from the observed water level near dam structure and area-volume curve. This method can be ideal for level pool reservoir but include potential errors when the inflow is influenced by the water level slope due to backwater effects from upstream flood inflows and strong wind induced by typhoon. In addition, the other uncertainties arisen from the storage reduction due to sedimentation after the dam construction and water level noise due to mechanical vibration transmitted from the electric power generator. These uncertainties impedes the accurate hydraulic inflow measurement requiring exquisite hydrometric data arrangement for reservoir waterbody. In this study, the distributed hydrologic model using UBC-3P boundary setting was applied and its feasibility was evaluated. Finally, the modeling performance has been verified since the calculated determination coefficient has been in between 0.96 to 0.99 after comparing with observed peak inflow and total inflow at Namgang dam reservoir.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1023-1035
• /
• 2016

Suspended sediment concentration (SSC) is a crucial riverine parameter in terms that it can be utilized for analyzing sediment transport, stability assessment of river and structure and so on. However, in case of domestic, sediment discharge data are not enough because of using conventional sediment samplers. This study aimed at developing a practical technique for estimating suspended sediment concentration in high spatial and temporal resolution by building relationship between acoustic backscatter (or SNR) from H-ADCP with actually observed data using LISST-100X. In this regard, a dedicated correction algorithm was proposed particularly for the adapted H-ADCP (SonTek SL-3000). Then, a SNR-SSC relation was built based upon a real-scale field experiment, where both H-ADCP and LISST-100X were concurrently operated to observe SNR and SSC, respectively. The coefficient of determination for the developed regression equation of SNR-SSC relation was around 0.85~0.88, thereby the relation could be evaluated to be highly correlated. The result of this study might be potentially applied for real-time and simultaneous observation of SSC when H-ADCP could be applied.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.2
• /
• pp.237-242
• /
• 2001

Colostrum deprived, newborn pigs (N=12, $1.64{\pm}0.05kg$) were used to study the renal threshold of carnitine, and effects of emulsified medium-chain triglyceride (MCT, tri-8:0) feeding on kinetics of plasma carnitine and urinary carnitine excretion. An arterial catheter was inserted through an umbilical artery, and a bladder catheter was inserted via the urachus. Piglets were oro-gastrically gavaged with one of six carnitine levels (0, 60, 120, 180, 240, $480{\mu}mol/kg\;W^{0.75}$) with (+MCT) or without medium-chain triglycerides (-MCT) in 0.9% NaCl solution. Blood was sampled into heparinized tubes at 0, 1, 2, 4, 6, 8, 14, and 20 h after gavage, and urine was collected and pooled into 1 h or 2 h composite samples to determine free- and short-chain carnitine concentrations. Plasma from the 12 newborn piglets before gavage contained $10.6{\pm}1.2{\mu}mol/L$ free carnitine and $7.2{\pm}0.6{\mu}mol/L$ acid-soluble acyl carnitine. The renal threshold for carnitine was similar between the MCT and the +MCT group (42.6 13.1 and $46.4{\pm}2.0{\mu}mol/L$, respectively), but the correlation between plasma free carnitine and urinary excretion was altered. Plasma free carnitine linearly increased with increasing carnitine dosage (-MCT group, $R^2=0.95$, p<0.001; +MCT group, $R^2=0.91$, p<0.001), but was decreased by 50% when medium-chain triglycerides were fed. The peak in plasma free carnitine concentration was depressed by medium-chain triglycerides feeding also. Therefore, the plasma and urinary short-chain/free carnitine ratio of the +MCT group was increased by 100% and 40%, respectively (p<0.01). Feeding of medium-chain triglycerides may delay plasma carnitine elevation via altering the kinetics of absorption. Similarly, the plasma and urinary short-chain/free carnitine ratio were affected by interaction between medium-chain triglycerides and time (p<0.01). The present study suggests that an oral carnitine dose over $480{\mu}mol/kg\;W^{0.75}$ may be needed to reach the free carnitine renal threshold within a short period, especially when provided together with medium-chain triglyceride.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.5
• /
• pp.1409-1417
• /
• 2020

The purpose is to increase the likelihood of physical education students for employment in public institutions by examining the priority for hiring sports-related public institutions. The subject of the study was purposeful sampling of a total of 11 persons including 4 sports professors, 3 NCS experts in sports field, 2 judges from public sports institutions, and 2 personnel in charge of hiring public institutions. Through this process, from January 3 to March 12, 2020, the importance of priority was analyzed using hierarchical structure analysis using the main factors of NCS vocational basic competency. All data are coded so that statistical processing can be performed. Using SPSS/PC (ver. 21.0) for Windows, the hierarchical structure analysis was used for frequency analysis and priority determination. First, communication skills (.231), organizational comprehension skills (.177), resource management skills (.128), interpersonal skills (.110), vocational ethics (.082), problems in the major areas of recruitment of sports-related public institutions Solving ability (.061), information ability (.056), mathematical ability (.054), self-development ability (.052), and description ability (.049) were analyzed in order. Second, in terms of evaluation items, communication is communication skills (.442), mathematical skills are basic computation skills (.512), problem solving skills are thinking skills (.722), self-development skills are self-management skills (.587), Resource management ability was analyzed in order of time management ability (.531), interpersonal relationship ability as teamwork ability (.382), information ability in computer use ability (.677), technical ability in technology understanding ability (.599).

• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.676-693
• /
• 2016

Although the methodology and models to assess the economic value of technology assets such as patents are being presented in various ways, there does not exist a structured assessment model which enables to objectively assess a database property's value, and thus there is a need to enhance the application feasibility of practical purposes such as licensing of DB assets, commercialization transfer, security, etc., through the establishment of the valuation model and the life-cycle decision logic. In this study, during the valuation process of DB assets, the size of customer demand group expected and the amount of demand, the size and importance of data sets, the approximate degree of database' contribution to the sales performance of a company, the life-cycle of database assets, etc. will be analyzed whether they are appropriate as input variables or not. As for most of DB assets, due to irregular updates there are hardly cases their life-cycle expires, and thus software package's persisting period, ie. 5 years, is often considered the standard. We herein propose the life-cycle estimation logic and valuation models of DB assets based on the concept of half life for DB usage frequency under the condition that DB assets' value decays and there occurs no data update over time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.639-645
• /
• 2018

This paper is intended to develop a decision model that can be applied to autonomous vehicles and autonomous mobile vehicles. The developed module has an independent configuration for application in various driving environments and is based on a platform for organically operating them. Each module is studied for decision making on lane changes and for securing safety through reinforcement learning using a deep learning technique. The autonomous mobile moving body operating to change the driving state has a characteristic where the next operation of the mobile body can be determined only if the definition of the speed determination model (according to its functions) and the lane change decision are correctly preceded. Also, if all the moving bodies traveling on a general road are equipped with an autonomous driving function, it is difficult to consider the factors that may occur between each mobile unit from unexpected environmental changes. Considering these factors, we applied the decision model to the platform and studied the lane change decision system for implementation of the platform. We studied the decision model using a modular learning method to reduce system complexity, to reduce the learning time, and to consider model replacement.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.43 no.4
• /
• pp.229-238
• /
• 2017

Objectives: The primary purpose of this study was to investigate the factors related with additional administration of sedative agent during intravenous conscious sedation (IVS) using midazolam (MDZ). The secondary purpose was to analyze the factors affecting patient satisfaction. Materials and Methods: Clinical data for 124 patients who had undergone surgical extraction of mandibular third molar under IVS using MDZ were retrospectively investigated in this case-control study. The initial dose of MDZ was determined by body mass index (BMI) and weight. In the case of insufficient sedation at the beginning of surgery, additional doses were injected. During surgery, peripheral oxygen saturation, bispectral index score (BIS), heart rate, and blood pressure were monitored and recorded. The predictor variables were sex, age, BMI, sleeping time ratio, dental anxiety, Pederson scale, and initial dose of MDZ. The outcome variables were additional administration of MDZ, observer's assessment of alertness/sedation, intraoperative amnesia, and patient satisfaction. Descriptive statistics were computed, and the P-value was set at 0.05. Results: Most patients had an adequate level of sedation with only the initial dose of MDZ and were satisfied with the treatment under sedation; however, 19 patients needed additional administration, and 13 patients were unsatisfied. In multivariable logistic analysis, lower age (odds ratio [OR], 0.825; P=0.005) and higher dental anxiety (OR, 5.744; P=0.003) were related to additional administration; lower intraoperative amnesia (OR, 0.228; P=0.002) and higher BIS right before MDZ administration (OR, 1.379; P=0.029) had relevance to patient dissatisfaction. Conclusion: The preoperative consideration of age and dental anxiety is necessary for appropriate dose determination of MDZ in the minor oral surgery under IVS. The amnesia about the procedure affects patient satisfaction positively.

• Journal of Korea Multimedia Society
• /
• v.13 no.5
• /
• pp.663-673
• /
• 2010

As a tool used for video maintenance, Video segmentation divides videos in hierarchical and structural manner. This technique can be considered as a core technique that can be applied commonly for various applications such as indexing, abstraction or retrieval. Conventional video segmentation used adaptive threshold to split video by calculating difference between consecutive frames and threshold value in window with fixed size. In this case, if the time difference between occurrences of cuts is less than the size of a window or there is much difference in neighbor feature, accurate detection is impossible. In this paper, Improved Adaptive threshold algorithm which enables determination of window size according to video format and reacts sensitively on change in neighbor feature is proposed to solve the problems above. Post-Processing method for decrement in error caused by camera flash and fast movement of large objects is applied. Evaluation result showed that there is 3.7% improvement in performance of detection compared to conventional method. In case of application of this method on modified video, the result showed 95.5% of reproducibility. Therefore, the proposed method is more accurated compared to conventional method and having reproducibility even in case of various modification of videos, it is applicable in various area as a video maintenance tool.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.3
• /
• pp.230-237
• /
• 2017

In this study, electrochemical methods were used to determine the optimum protection potential of S355ML steel for the cathodic protection of offshore wind-turbine-tower substructures. The results of potentiodynamic polarization experiments indicated that the anodic polarization curve did not represent a passivation behavior, while under the cathodic polarization concentration, polarization was observed due to the reduction of dissolved oxygen, followed by activation polarization by hydrogen evolution as the potential shifted towards the active direction. The concentration polarization region was found to be located between approximately -0.72 V and -1.0 V, and this potential range is considered to be the potential range for cathodic protection using the impressed current cathodic protection method. The results of the potentiostatic experiments at various potentials revealed that varying current density tended to become stable with time. Surface characterization after the potentiostatic experiment for 1200 s, by using a scanning electron microscope and a 3D analysis microscope confirmed that corrosion damage occurred as a result of anodic dissolution under an anodic polarization potential range of 0 to -0.50 V, which corresponds to anodic polarization. Under potentials corresponding to cathodic polarization, however, a relatively intact surface was observed with the formation of calcareous deposits. As a result, the potential range between -0.8 V and -1.0 V, which corresponds to the concentration polarization region, was determined to be the optimum potential region for impressed current cathodic protection of S355ML steel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.737-746
• /
• 2019

Most landslides in the country are shallow failures triggered by intense rainfall. Many researchers have revealed the possibility of predicting shallow failure through the volumetric water content (VWC). This study examined how to determine shallow failure using the gradient characteristics of the volumetric water content. For this, flume experiments were conducted using weathered granite soil. To confirm the saturation state of the surface layer under a rainfall intensity of 30 and 50mm/hr, VWC sensors were installed at depths of 10 and 20 cm on the upper, middle and lower slope. The test results showed that a shallow failure determination using VWC could be applied limitedly according to the slope degree. In addition, the effective cumulative rainfall due to the rainfall infiltration velocity is considered the main factor for the failure time. The failure prediction using the gradient of the VWC depends on the installation location and depth of the sensor. According to the experimental data, the measured value at 20 cm below the slope was most effective. Therefore, an analysis method of VWC and the method of selecting the installation location confirmed through this study can provide important data for presenting the measurement criteria using VWC in the future.