• 소성∙가공
• /
• 제22권5호
• /
• pp.269-274
• /
• 2013

Experiments and numerical simulations of the incremental upsetting test were carried out to investigate void closure behavior and mechanical characteristic of a 1.5wt%C ultra-high carbon steel. The experimental results showed that the voids become quickly smaller as the reduction ratio increases. The simulation results confirmed this behavior and indicated that the voids were completely closed at a reduction ratio of about 40~45% during incremental upsetting. After the completion of the incremental upsetting tests, the process of diffusion bonding was employed to heal the closed voids in the deformed specimens. To check the appropriate temperature for diffusion bonding, deformed specimens were kept at 800, 900, 1000 and $1100^{\circ}C$ for an hour. In order to investigate the effect of holding time for diffusion bonding at $1100^{\circ}C$, specimens were kept at 10, 20, 30, 40, 50 and 60minutes in the furnace. A distinction between closed and healed voids was clearly established using microstructural observations. In addition, subsequent tensile tests demonstrated that complete healing of a closed void was achieved for diffusion bonding temperatures in the range $900{\sim}1100^{\circ}C$ with a holding time larger than 1 hour.

• 한국가정과학회지
• /
• 제6권1호
• /
• pp.1-13
• /
• 2003

This study attempts to investigate attitude toward internet shopping. internet purchase behavior. and purchase satisfaction of college student consumers. The data used for this study were collected from 361 college students who is living the southern part of Korea. and purchased goods and services on the internet at least one time during the previous 12 months. in Autumn, 2001. Data analysis were carried out using SAS package. Statistics used for data analysis were Cronbach'$\alpha$, Pearson's correlation analysis, and multiple regression. The results were summarized as follows : First, college student consumers in general are favorable to the internet shopping. The variable that has significant influence on the attitude toward the internet shopping was the web searching competence. Second, the variables that have significant influence on the internet purchases were the number of site visits, internet using time, credit card possession. personal income, and web searching competence. Third, the variables that have significant influence on the amount of internet purchases were personal income, internet using time, number of site visits. and credit card possession. Fourth, the variables that have significant influence on the satisfaction with internet shopping were internet shopping attitude and web searching competence.

• 한국안전학회지
• /
• 제32권1호
• /
• pp.75-81
• /
• 2017

A series of laboratory experiments has been performed in order to investigate the behavior of water-air two-phase flow in a horizontal pipe. A conductivity meter has been applied to detect the irregular alternation of air at the specific points in flows. The experimental condition has been established according to the water and air flowrates. Passing time, which is the time length for a measuring probe to pass through the entire length of a specific bubble, has been defined to evaluate the size of bubbles in the flow. Passing length, which can be considered as the equivalent value to bubble size and determined from the product of passing time and cross-sectional averaged velocity, and its corresponding occurrence frequency have been analyzed to classify the air flow patterns according to the condition of air and water fluxes. From the result, the dependancy of flow patterns on the variation of air-water flux ratio has been investigated and the existence of thresholds also checked for classifying the behavior of air in the flow.

• 한국발생생물학회지:발생과생식
• /
• 제1권2호
• /
• pp.181-187
• /
• 1997

This study has been conducted to investigate the mating behavior, time sequence of mating and time limit with which female can fulfill spawning and brooding after pre-spawning molting in the giant fresh-water prawn, macrobrachium rosenbergii reared in the laboratory. the results obtained were summarized as follows. Mating happened spontaneously as the following sequences: courting gesture, seizure of female by male, mounting, turning of female, copulation. The entire mating lated approximately seven minutes. The endopodite of 2nd pleopod of male bore the appendix masculins whcih are male's secondary sex characteristic. cinciulli was formed at the distal portion of appendix interna which are on the upper portion of appendix masculins and helped stabilizing the connection of each side of 2nd pleopod during mating. After the connection of each side of 2nd plepod was fixed on the posterior portion of the thoracic sternum in female, a gelatinous spermatophore that emitted at the basipodite of 5th pereiopod during courting gesture was deposited on the ventral groove of 2nd, 3rd, 4th and 5th pereiopod. time limit which female can fulfill copulation and brooding was from 3 hours to 15 hours after pre-spawning molting.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1152-1157
• /
• 2004

Temporal behavior of the laser induced incandescence (LII) signal is often used for soot particle sizing, which is possible because the cooling behavior of a laser heated particle is dependent on the particle size. In present study, LII signals of soot particles are modeled using two non-linear coupled differential equations deduced from the energy- and mass-balance of the process. The objective of this study is to see the effects of particle size, laser fluence on soot temperature characteristics and cooling behavior. Together with this, we focus on validating our simulation code by comparing with other previous results. Results of normalized LII signals obtained from various laser fluence conditions showed a good agreement with that of Dalzell and Sarofim's. It could be found that small particles cool faster at a constant laser fluence. And it also could be observed that vaporization is dominant process of heat loss during first 100ns after laser pulse, then heat conduction played most important role while thermal radiation had little influence all the time.

• 열처리공학회지
• /
• 제27권2호
• /
• pp.72-78
• /
• 2014

Isothermal transformation behavior of a 10% Cr heat resistant steel fabricated by centrifugal casting process was investigated. Normalized specimen at $1100^{\circ}C$ for 1 hour was isothermally annealed at temperature range between $600^{\circ}C$ and $700^{\circ}C$ with various time. The annealed specimen had eutectoid structure which was generated along austenitic grain boundary during isothermal annealing. Areal fraction of eutectoid structure increased up to 25% after holding at $700^{\circ}C$ for 20 hours. It was observed that austenitic matrix was transformed to ferrite structure and fine $M_{23}C_6$ carbides with increase of annealing time. Time-temperature-transformation diagram of the centrifugally cast 10% Cr steel with 0.18 wt% C was plotted based on the results of isothermal transformation behavior.

• Steel and Composite Structures
• /
• 제18권6호
• /
• pp.1465-1478
• /
• 2015

The effect of cutting off fibers on transient load in a polymeric matrix composite lamina was studied in this paper. The behavior of fibers was considered to be linear elastic and the matrix behavior was considered to be linear viscoelastic. To model the viscoelastic behavior of matrix, a three parameter solid model was employed. To conduct this research, finite difference method was used. The governing equations were obtained using Shear-lag theory and were solved using boundary and initial conditions before and after the development of break. Using finite difference method, the governing integro-differential equations were developed and normal stress in the fibers is obtained. Particular attention is paid the dynamic overshoot resulting when the fibers are suddenly broken. Results show that considering viscoelastic properties of matrix causes a decrease in dynamic load concentration factor and an increase in static load concentration factor. Also with increases the number of broken fibers, trend of increasing load concentration factor decreases gradually. Furthermore, the overshoot of load in fibers adjacent to the break in a polymeric matrix with high transient time is lower than a matrix with lower transient time, but the load concentration factor in the matrix with high transient time is lower.

• Computers and Concrete
• /
• 제22권3호
• /
• pp.291-303
• /
• 2018

As the concept of "sponge city" is proposed, the pervious concrete for permeable pavement has been widely used in pavement construction. This paper aims at investigating the dynamic behavior and energy evolution of pervious concrete under impact loading. The dynamic compression and split tests are performed on pervious concrete by using split Hopkinson pressure bar equipment. The failure criterion on the basis of incubation time concept is used to analyze the dynamic failure. It is demonstrated that the pervious concrete is of a strain rate sensitive material. Under high strain rate loading, the dynamic strength increases while the time to failure approximately decreases linearly as the strain rate increases. The predicted dynamic compressive and split tensile strengths based on the failure criterion are in accordance with the experimental results. The total damage energy is found to increase with the increasing of strain rate, which means that more energy is needed to produce irreversible damage as loading rate increases. The fractal dimensions are observed increases with the increasing of impact loading rate.

• 한국의류산업학회지
• /
• 제4권6호
• /
• pp.517-523
• /
• 2002

This study examines whether there are differences in consumer's evaluation price zone on the clothing clue (the type of clothing, brand, time of fashion, place of origin, material. submaterial, place for sale) according to consumer purchasing behavior. Therefore the ultimate goal is to offer help in fixing price when establishing marketing of the clothing industry by grasping the actual price set by consumers under the IMP system. The female consumers of 20s and 30s were chosen as study subjects for their sensitivity to the purchase of clothing. The tests carried out in this research are: SPSSIPC+ is used for frequency Analysis. The Results of this study are showed as the following: It was analyzed that 4 types of consumer are the reasonable consumption oriented consumer, fashion oriented consumer, the no care of fashion consumer and high price oriented consumer Among the several kinds such as the type of clothing, brand, time of fashion, place of origin, material, submaterial, place for sale, only on the type of clothing, there are difference in the type of the consumers, on the time of buying clothes, in the behavior of buying clothes and also on the degree of fashion and the place of origin among such kinds.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권9호
• /
• pp.1219-1227
• /
• 2000

Rumination behavior, in vivo digestibility of cell wall constituents, particle size reduction in the rumen, and retention time in the digestive tract of sheep were examined using rice and oat straw as roughage sources. The in sacco digestibility, rumen fermentation, and microbial population and internal adenosine 5-triphosphate (ATP) content were also determined under feeding conditions of high-roughage and high-concentrate diets. Chewing number and time in rumination behavior were higher with rice straw than with oat straw, while the in sacco and in vivo DMD of rice straw were consistently lower than those of oat straw. Rice straw also showed higher frequency of thinner and longer particles in the rumen contents and lower retention time in the whole digestive tract as compared to those of oat straw. Rice straw was more effective to maintain the ruminal pH than oat straw, being reflected in higher internal ATP content of large-type protozoa on the high- concentrate diet. Changes in the ruminal microflora by shifting from the low- to the high- concentrate diet were also different between rice and oat straw.