• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.81-89
• /
• 2014

This study researched on the effect of HP/LP-EGR system to improve fuel consumption of Low Temperature Combustion Engine. Firstly, low temperature combustion engine with HP/LP-EGR system was established using 6.0L wastegate turbocharger HDDI engine. And suppliable EGR rate of the engine was proven to be enough to realize stable low temperature combustion. Then, optimum operating strategy was founded to develop fuel consumption of the engine. Control parameters were HP/LP-EGR valve and IPCV(Intake Pressure Control Valve) duty. Experiments method was that characteristics of the engine were measured and analyzed according to HP/LP-EGR strategies while EGR rate was fixed. Operating range for the strategy were divided into three parts, low load for low temperature combustion, high load for conventional diesel combustion, and transient condition. Finally, with the above strategy of this study, BSFC of the engine was improved about 2% compared to the base engine, and emission level, NOx and PM, met Tier4Final emission regulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.2006-2012
• /
• 2013

This case study deal with the investigation of various causes and analyses concerning the cases of the collapse of reinforced segmental retaining walls installed for newly constructing a peripheral road within the campus of ${\bigcirc}{\bigcirc}$ University located in Gyeonggi-do. As results of stability analyses and reviewing of design documents concerning collapsed reinforced segmental retaining walls, such a collapse appeared because of problems related to construction including poor-compacted backfill, the omission of the investigation on the bearing capacity, the length and space in the installation of reinforced materials, and drainage systems. Also, problems during diverse types of designing were confirmed involving the stability analysis of the entire slope stability to be considered during designing and failure in application of the proposed methods of FHWA or NCMA which are generally used for two-tier reinforced segmental retaining walls. In addition, based on these details of the stability assessment, the study proposed reinforcement solutions and construction methods for stabilizing reinforced segmental retaining walls to be reconstructed in the future.

• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.879-883
• /
• 1998

In the vacuum casting process for superalloys, molten metal are poured into the heated ceramic mold up to $1000^{\circ}C~1700^{\circ}C$. The mold has to have the high temperature strength during casting and made by hlgh purity alumina. In this sturdy, the mold was made by low purity alumina and changed silica contents intended to have high strength The 7.7wt.% SiOz specimens have 10- 55% higher strength than others in room and high temp. Therefore, the cast mold has been developed in this study for single crystal vacuum cast by controlling the ratio of fused alumina and colloidal silica which are used commercially for conventional casting in industries.

• Journal of Wellness
• /
• v.7 no.2
• /
• pp.113-121
• /
• 2012

This study chose the academic journals related with e-sports for analysis among the top tier journals of National Research Foundation of Korea from 2006 to 2011 to check the academic trend Beginning in 2006, the first study of e-sports was published in the journal related with e-sports. So, the studies from 2006 to 2011 were chosen for analysis. Using Research Information Sharing Service(RISS), the keyword 'e-sports' was searched. By virtue of this process, total 27 studies were selected as final analysis. So, the academic trends are as follows. In Korea, the studies related with e-sports have started from the beginning of 2000s with internet and then it spread out via cable TV. And then from the middle of 2000s, e-sports was discussed seriously. The early subject of the studies usually focused on the measurement of e-sports based on the strategic elements as a product. After that, game addiction and violent tendency which were one of the biggest issues were raised as a constant problem and it became the academic studies of user behavior. E-sports became a recreation culture of teenagers so it has been in charge of the role of exit and the problems related with it have continuously appeared. So, the academic studies tend to have departmentalization like immersion, addiction, sociality, self-regulation and etc. But, there was a tendency that the similar contents were repeated in the view point of subject and method while the subjects were departmentalized. So, for the systematic study of e-sports, development of the unique subject, study method and verification process should be conducted continuously.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.1
• /
• pp.50-63
• /
• 2007

The development of domestic plant specific emission factors is very important to estimate reliable national emissions management. This study, for the reason, was carried out to obtain advances emission factor for Carbon Dioxide ($CO_2$) by source-specific emission tests from the iron and steel industry sector which is well known as one of the major sources of greenhouse gases ($CO_2$). Emission factors estimated in this study were compared with those of IPCC for evaluation and they were found to be of similar level in the case of $CO_2$. There was no good information available on $CO_2$ plant specific emission factors from the iron and steel industry in Korea so far. The major emission sources of $CO_2$ examined from the iron and steel manufacturing precesses were a hot blast stove, coke oven, sintering furnace, electric arc furnace, heating furnace, and so on. In this study, the concentration of $CO_2$ from the hot blast stove process was the highest among all processes. The $CO_2$ emission factors for a ton of Steel and Iron products (using B-C oil) were estimated to be 0.315 $CO_2$ tonne (by Tier 3 method) and 4.89 $CO_2$ tonne. In addition, emission factor of $CO_2$ for heating furnace process was the highest among all process. Emission factors estimated in this study were compared with those of IPCC for evaluation and they were found to be of similar level in the case of $CO_2$.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.1
• /
• pp.141-156
• /
• 2008

Market structure analysis is a very useful tool to analyze the competition boundary of the brand or the company. But most of the studies in market structure analysis, the concern lies in nondurable goods such as candies, soft drink and etc. because of the their availability of the data. In the field of durable goods, the limitation of the data availability and the repurchase time period constrain the study. In the analysis of the automobile market, those of views might be more persuasive. The purpose of this study is to analyze the structure of automobile market based on some idea suggested by prior studies. Usually the buyers of the automobile tend to buy upper tier when they buy in the next time. That kind of behavior make it impossible to analyze the structure of automobile market under the level of automobile model. For that reason I tried to analyze the market structure in the brand or company level. In this study, consideration data was used for market structure analysis. The reasons why we used the consideration data are summarized as following. Firstly, as the repurchase time cycle is too long, brand switching data which is used for the market analysis of nondurable good is not avaliable. Secondly, as we mentioned, the buyers of the automobile tend to buy upper tier when they buy in the next time. We used survey data collected in the U.S.A. market in the year of 2005 through questionaire. The sample size was 8,291. The number of brand analyzed in this study was 9 among 37 which was being sold in U.S.A. market. Their market share was around 50%. The brands considered were BMW, Chevrolet, Chrysler, Dodge, Ford, Honda, Mercedes, and Toyota. �� ratio was derived from frequency of the consideration set. Actually the frequency is different from the brand switch concept. In this study to compute the �� ratio, the frequency of the consideration set was used like a frequency of brand switch for convenience. The study can be divided into 2 steps. The first step is to build hypothetical market structures. The second step is to choose the best structure based on the hypothetical market structures, Usually logit analysis is used for the choice best structure. In this study we built 3 hypothetical market structure. They are type-cost, cost-type, and unstructured. We classified the automobile into 5 types, sedan, SUV(Sport Utility Vehicle), Pickup, Mini Van, and Full-size Van. As for purchasing cost, we classified it 2 groups based on the median value. The median value was $28,800. To decide best structure among them, maximum likelihood test was used. Resulting from market structure analysis, we find that the automobile market of USA is hierarchically structured in the form of 'automobile type - purchasing cost'. That is, result showed that automobile buyers considered function or usage first and purchasing cost next. This study has some limitations in the analysis level and variable selection. First, in this study only type of the automobile and purchasing cost were as attributes considered for purchase. Considering other attributes is very needful. Because of the attributes considered, only 3 hypothetical structure could be analyzed. Second, due to the data, brand level analysis was tried. But model level analysis would be better because automobile buyers consider model not brand. To conduct model level study more cases should be obtained. That is for acquiring the better practical meaning, brand level analysis should be conducted when we consider the actual competition which occurred in the real market. Third, the variable selection for building nested logit model was very limited to some avaliable data. In spite of those limitations, the importance of this study lies in the trial of market structure analysis of durable good.

• Journal of the Korean Institute of Gas
• /
• v.24 no.6
• /
• pp.1-10
• /
• 2020

Reactivity controlled compression ignition (RCCI) combustion is one of dual-fuel combustion systems which can be constructed by early diesel injection during the compression stroke to improve premixing between diesel and air. As a result, RCCI combustion promises low nitrogen oxides (NOx) and smoke emissions comparing to those of general dual-fuel combustion. For this combustion system, to meet the intensified emission regulations without emission after-treatment systems, exhaust gas recirculation (EGR) is necessary to reduce combustion temperature with lean premixed mixture condition. However, since EGR is supplied from the front of turbocharger system, intake pressure and the amount of fresh air supplementation are decreased as increasing EGR rate. For this reason, the effect of various EGR rates on the brake power and thermal efficiency of natural gas/diesel RCCI combustion under two different operating conditions in a 6 L compression ignition engine. Varying EGR rate would influence on the combustion characteristic and boosting condition simultaneously. For the 1,200/29 kW and 1,800 rpm/(lower than) 90 kW conditions, NOx and smoke emissions were controlled lower than the emission regulation of 'Tier-4 final' and the maximum in-cylinder pressure was 160 bar for the indurance of engine system. The results showed that under 1,200 rpm/29 kW condition, there were no changes in brake power and thermal efficiency. On the other hand, under 1,800 rpm condition, brake power and thermal efficieny were decreased from 90 to 65 kW and from 37 to 33 % respectively, because of deceasing intake pressure (from 2.3 to 1.8 bar). Therefore, it is better to supply EGR from the rear of compressor, i.e. low pressure EGR (LP-EGR) system, comparing to high pressure EGR (HP-EGR) for the improvement of RCCI power and thermal efficiency.

• Journal of Korea Port Economic Association
• /
• v.25 no.2
• /
• pp.57-72
• /
• 2009

The purpose of this paper is to show the empirical measurement way of operation risk evaluation in domestic seaports for overcoming the limitations which the traditional DEA method has by using 13 Korean ports in 2003 for 4 inputs(birthing capacity, cargo handling capacity, number of coastal guard vessel, number o f coastal special guard vessel ) and 5 outputs(Export and Import Quantity, Number of Ship Calls, number of coastal accident, number of coastal crime, number of coastal pollution). Because traditional DEA method has produced the limited set of information, negative DEA mixed with tier, stratification and layering methods should be adopted. The goal of negative DEA is to set up DEA models that will place the poor operating ports on or close to the empirical frontier. The core empirical results of this paper are as follows. First, Donghae ports should benchmark the operation way of Yeasu, Busan, Woolsan ports in terms of the middle and longterm base. Second, 5 ports(ports of Taean, Yeasu, Tongyoung, Busan, Sokcho) which were revealed as the poor operating ports in Negative DEA analysis should benchmark Incheon, Woolsan, Pohan, and Donhae ports. The policy implication to the Korean seaports and planners is that Korean seaports should introduce the new methods like Negative DEA of this paper for predicting the poor operating in the ports.

• Korean Journal of Labor Studies
• /
• v.24 no.2
• /
• pp.367-408
• /
• 2018

This study examines the features of globalization process in GM and Hyundai Motors, especially in the expansion into China auto market, through a joint venture(hereafter JV) research center. Due to the large scale market in China and the 50:50 JV, the two companies had to respond in some way to the Chinese government's request for localization of research and development functions, and their response affected the role of the JV research center. Even though the improvement in technological capability expected from the JV by the Chinese side did not appear well in the early stage in both JV, but relatively the Shanghai GM JV research center had a technological progress compared to the Beijing Hyundai JV research center. This paper explains the differences in the technical capabilities of the two JV research center, despite the same type of JV, as the difference between the status of the Chinese partner and the global strategy of the parent company. SAIC, a Chinese partner in Shanghai GM as a top-tier company, not only has been strongly demanding technology transfer from GM since the beginning of the JV, but has also made efforts to improve its own technical capabilities. Meanwhile, BAIC, a Chines partner in Beijing Hyundai as a mid-tier company, has not been strongly demanding technology transfer and lacked its own research base. Regarding the parent company's global strategy, although both companies controlled the core areas of research and development by their parent companies, GM actively considered using the Chinese RV to develop Chinese and emerging country vehicles. On the other hand, Hyundai Motors responded to the localization demand of the Chinese government while paying more attention to preventing technology leakage through its independent research center in China. The above discussion shows that the process of globalization of a company is a political process in which the global strategy of the parent company and the demands of the stakeholders surrounding the subsidiary are collided and compromised, rather than a process in which the harmony and cooperation between the parent company and its subsidiaries are smoothly achieved as the parent company's policies are unilaterally implemented.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.45-53
• /
• 2022

In order to improve the emission of diesel engines, natural gas-diesel dual fuel combustion compression ignition engines are in the spotlight. In particular, a reactivity controlled compression ignition (RCCI) combustion strategy is investigated comprehensively due to its possibility to improve both efficiency and emissions. With advanced diesel direct injection timing earlier than TDC, it achieves spontaneous reaction with overall lean mixture from a homogeneous mixture in the entire cylinder area, reducing nitrogen oxides (NOx) and particulate matter (PM) and improving braking heat efficiency at the same time. However, there is a disadvantage in that the amount of incomplete combustion increases in a low load region with a relatively small amount of fuel-air. To solve this, sensitive control according to the diesel injection timing and fuel ratio is required. In this study, experiments were conducted to improve efficiency and exhaust emissions of the natural gas-diesel dual fuel engine at low load, and evaluate combustion stability according to the diesel injection timing at the operation point for power generation. A 6 L-class commercial diesel engine was used for the experiment which was conducted under a 50% load range (~50 kW) at 1,800 rpm. Two injectors with different spray patterns were applied to the experiment, and the fraction of natural gas and diesel injection timing were selected as main parameters. Based on the experimental results, it was confirmed that the brake thermal efficiency increased by up to 1.3%p in the modified injector with the narrow-angle injection added. In addition, the spray pattern of the modified injector was suitable for premixed combustion, increasing operable range in consideration of combustion instability, torque reduction, and emissions level under Tier-V level (0.4 g/kWh for NOx).