• 제목/요약/키워드: Ti-mesh

검색결과 76건 처리시간 0.022초

<001> 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 단결정의 상변화 및 유전 특성 (Phase Transformation and Dielectric Properties of <001> 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 Single Crystals)

  • 이은구;이재갑
    • 한국재료학회지
    • /
    • 제21권7호
    • /
    • pp.391-395
    • /
    • 2011
  • The structure and dielectric properties of poled <001>-oriented 0.7Pb($Mg_{1/3}Nb_{2/3})O_3-0.3PbTiO_3$ (PMN-0.3PT) crystals have been investigated for orientations both parallel and perpendicular to the [001] poling direction. An electric field induced monoclinic phase was observed for the initial poled sample. The phase remained stable after the field was removed. A quite different temperature dependence of dielectric constant has been observed between heating and cooling due to an irreversible phase transformation. The results of mesh scans and temperature dependence of the dielectric constant demonstrate that the initial monoclinic phase changes to a single domain tetragonal phase at 370K and to a paraelectric cubic phase at 405K upon heating. However, upon subsequent cooling from the unpoled state, the cubic phase changes to a poly domain tetragonal phase and to a rhombohedral phase. In the ferroelectric tetragonal phase with a single domain state, the dielectric constant measured perpendicular to the poling direction was dramatically higher than that of the parallel direction. A large dielectric constant implies easier polarization rotation away from the polar axis. This enhancement is believed to be related to dielectric softening close to the morphotropic phase boundary and at the phase transition temperature.

심하게 흡수된 치조제에 Titanium 강화 Gore-Tex (TRG) 및 Titanium Mesh로 수직적 골증대술을 실시한 증례보고 (Alveolar Ridge Augmentation Using Titanium Reinforced Goretex (TRG) and Titanium Mesh in Severe Alveolar Bone Loss Area: Case Report)

  • 김원직;윤경성;홍수련;최진경;이용욱;김동석;현종오;조효원;최지혜;정태웅;배윤기;권선규;최현준;이현수;양수남
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제33권1호
    • /
    • pp.66-72
    • /
    • 2011
  • A severely vertical resorbed ridge is a significant challenge in implant dentistry. To solve this problem, several augmentation techniques, such as guided bone regeneration (GBR), onlay bone grafts, distraction osteogenesis, and ridge splitting techniques, have been proposed and used for several years. Among these methods, vertical ridge augmentation using guided bone regeneration aims to build space and guide osteoblasts to this space to promote osteogenesis. The aim of guided bone regeneration is to maintain and stabilize the space and block the proliferation of adjacent soft tissue. In our hospital, we encountered a case of a woman in her forties with an atrophied mandible, who underwent implant surgery in the right mandible. Titanium reinforced Gore-Tex (TRG) was used to augment the mandible and titanium mesh was used in the left mandible. Favorable results were obtained. This report compares the two methods and reviews the relevant literature.

OrthoMTA 컴팩터의 크리프피드 CBN 연삭을 위한 드레싱 조건 연구 (Study on Dressing Conditions for Creep-feed in Cubic Boron Nitride Grinding of OrthoMTA Compacters)

  • 맹희영;백은표
    • 한국생산제조학회지
    • /
    • 제23권1호
    • /
    • pp.69-74
    • /
    • 2014
  • An OrthoMTA compacter is made by machining a Ni-Ti alloy wire using tapered helix creep-feed grinding machines. This aim of this study is to find the optimal dressing conditions to sharpen the corner of a cubic boron nitride (CBN) wheel. On the basis of the results of various experiments, it is verified that the most important factors in dressing are the dressing depth and feeding method, whereas the feed rate has less importance for producing a smaller corner R value. The study also finds the optimum dressing depth to reduce the dressing time, a feeding speed and method to stabilize the machining, and the mesh grade for the CBN wheel to make the groove of the compacter deeper.

메쉬전극을 이용한 TCO-Iess 염료태양전지제작 (Using the mesh electrode for TCO-Iess dye-sensitized solar cells application)

  • 정기영;주인숙;성열문;곽동주;박차수
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2009년도 추계학술대회 논문집
    • /
    • pp.403-405
    • /
    • 2009
  • 본 연구에서는 염료태양전지의 제작 시 고가의 TCO전극을 사용하지 않고 간단히 광전극을 대체할 수 있는 방법으로 메쉬전극을 이용하는 TCO-less 염료태양전지를 제작하였다. 메쉬전극을 이용한 TCO-less 염료태양전지의 구조는 "Glass / 메쉬전극($TiO_2$를 딥코팅 한 후 염료를 흡착시킴) / 전해질 / 멤브레인 필터 / 상대전극(Pt-coated TCO) / Glass" 로 구성된다. 제작된 샘플의 광전변환 효율은 약 1.5% 였으며 fill factor는 0.55로 나타났다. 향후 계획으로 효율을 향상 시킬 수 있는 방법을 도입하여 광전류밀도와 fill factor를 개선하는 연구를 진행할 예정이다.

  • PDF

Ultrasound와 Pulsed UV 조사시 $H_{2}O_{2}$ 발생량과 보조제 주입시 bisphenol A, 17${\beta}$-estradiol의 제거에 대한 연구 (A Study of $H_{2}O_{2}$ Production and BPA/17${\beta}$-estradiol Removal by Ultrasound and Pulsed UV in the Presence of Various Catalysts)

  • 한종훈;이성재;윤여민;허남국
    • 상하수도학회지
    • /
    • 제26권2호
    • /
    • pp.313-319
    • /
    • 2012
  • This study investigated the relative degradation of commonly known endocrine-disrupting compounds such as bisphenol A (BPA) and 17${\beta}$-estradiol (E2) using ultrasound (US) and pulsed ultraviolet (PUV) in water. The removal efficiency of BPA and E2 was determined as a function of generating power and $H_{2}O_{2}$ production. The ultrasound and PUV irradiation of the aqueous solution was performed in 3 L and 90 L stainless reactor at a constant temperature of $20^{\circ}C$ with an applied power of 200 W and 2000 W, respectively. The removal of BPA and E2 by US and PUV varied with catalysts. The experiments were conducted under the following conditions: total operating time, 30 min; initial concentration, 1 uM. In the case of E2 (10 min), % removal was 92.5/95.8/87.6/82.4, while % removal of BPA (10 min) was 62.3/82.3/91.1/67.0/64.3 in various conditions (PUV, $PUV+H_2O_2$, PUV+wire mesh, $PUV+TiO_2$ coated wire mesh), respectively.

입도분포에 따른 하상퇴적물의 지구화학적 분산 및 부화 (Geochemical Dispersion and Enrichment of Fluvial Sediments Depending on the Particla Size Distribution)

  • 이현구
    • 자원환경지질
    • /
    • 제32권3호
    • /
    • pp.247-260
    • /
    • 1999
  • Geochermical characteristics of the fluvial sediments deprnding on particle size distribution size were investigated in the respect of majir, minor and rare eath element chemisitry. Ratios of $Al_{2}O_{3}/Na_{2}O$ and $K_{2}O/Na_{2}O$ of the sediments show the homogeneous valus, and partly positive correlation with $SiO_{2}/Al_{2}O_{3}$, respecively. Characteristics of minor element ratios (V/Ni, Cr/V, Ni/Co and Zr/Hf)are within the lower and narrow range. Thesesuggested that sediment sources may be acidic to intermediate granitic rock, and may be explained by simple weathering and sedimentation. With increasing SiO2 contents, concentrations of $Al_{2}O_{3}$, $Fe_{2}O_{3}$, CaO and MgO decreased, but those of $K_{2}O$ and $Na_{2}O$ increased, Concentrations of Ba, Be, Cs, Cu, Li, Ni, Sr, V and Zr show comparatively normal negative and some positive trends. Compared with the mean composition of granite, concentrations of $Al_{2}O_{3}$, $Fe_{2}O_{3}$, MnO, CaO and MgO in the sediments of the study area were highly enriced. Among some minor and rare earth elements, concentrations of As, Cd, Cu, and V were enriched, but those of Be, Ce, Rb, Sc, Sr and Zn were depleted when compared with average composition of granite. By decreasing of particle size fractions, SiO2, Rb and Sr conterts decreased, but concentrations of $Al_{2}O_{3}$, $Fe_{2}O_{3}$, CaO, MgO, $TiO_{2}$, MgO, $P_{2}O_{5}$, Be, Cu, Hf, Pb, V and Zr increased. From the correlations between particle size fractions and element concenreations, some elements of $Fe_{2}O_{3}$, CaO, MgO, $P_{2}O_{5}$, Cu, Ni, Zn and Zr showed typical trends in the secondary contramination sediments. These trends are typically shown under 100 mesh fractions. It indicates that the fraction of minus 100 mesh is the optimum size fraction for geochemical and environmental survey.

  • PDF

다양한 산소 투과도를 가진 커버필름과 산소지시물질로 제작된 인쇄형 TTI (Printable Time Temperature Integrator Consisting of Oxygen Indicator and Cover Film with Various Oxygen Permeability)

  • 김도현;장한동;한서현;안명현;이승주
    • 한국포장학회지
    • /
    • 제24권2호
    • /
    • pp.41-48
    • /
    • 2018
  • 본 연구에서는 산소지시물질을 이용한 새로운 UV-activation 인쇄형 시간-온도 이력지시계(time temperature integrator; TTI)를 개발하였다. $TiO_2$와 glycerol이 UV activation을 위해서 첨가되었으며 glycerol의 경우 비가역적반응을 위해 첨가량을 23 mg으로 조절하였다. 또한 인쇄적성을 위해 zein 함량 0.8 g, 90% ethanol 함량 4.0 g으로 조절하였고 silk screen의 mesh는 250 mesh일 때 최적의 인쇄성상을 나타내었다. 서로 다른 커버필름(PE, PET, OPP, and LLDPE)을 이용하여 색변화속도와 온도의존성을 측정하였다. 각 필름의 $E_a$를 측정한 결과 OPP, PE, LLDPE의 경우 60.07-84.47 kJ/mol의 $E_a$를 나타내어 TTI로서의 적용가능성을 확인할 수 있었다. 반면 PET의 경우 $E_a$가 15.76 kJ/mol으로 적용성이 떨어지는 것으로 판단되었다. 또한 커버필름의 두께의 경우 $E_a$에 영향을 미치지 않는 것으로 나타났으며 annealing한 필름은 고분자 구조의 변화로 인해 산소 투과도가 annealing하지 않은 동종의 필름보다 PET의 경우 29.8%, PVC의 경우 60.7% 감소하는 것으로 나타났다. 본 연구에서 새롭게 개발된 UV-activation 인쇄형 TTI는 다양한 커버필름을 통해 산소 투과도와 $E_a$를 조절할 수 있었고 annealing을 통하여 추가적으로 산소 투과도를 조절할 수 있어 다양한 유효기간을 갖는 식품에 광범위하게 사용될 수 있을 것으로 기대된다.

플라즈마 용사를 이용한 복합세라믹 미세필터 연구 (Study on Metal Microfilter Coated with Ceramics by Using Plasma Thermal Spray Method)

  • 송인규;이영민;신현명;최해운
    • 대한기계학회논문집A
    • /
    • 제35권9호
    • /
    • pp.1035-1040
    • /
    • 2011
  • 본 논문은 세라믹과 금속파우더를 이용한 복합소재를 플라즈마 용사 방식으로 개발한 결과를 수록하였다. 사용된 세라믹 파우더는 $Al_2O_3+40TiO_2$ 이고 입자 크기는 $20{\mu}m$, $Al_2O_398+$파우더의 입자 크기는 $45{\mu}m$를 사용하였다. $20{\mu}m$, $30{\mu}m$$50{\mu}m$ 금속필터 입자는 SIKA-R 20IS, 30IS 및 50IS(소결금속필터)을 사용 했으며, $75{\mu}m$ 금속필터 입자는 5 겹 소결메쉬 필터를 사용��다. 용사 공정으로 가공된 복합 필터는 세라믹 파우더의 종류, 크기 및 코팅 두께에 따라 성능의 차이를 보였으나, 전반적으로 필터링 가능 능력은 향상되었다.

Zr1-xTixV0.4Ni1.2Mn0.4-yMoy계 합금전극의 Mo 함량에 따른 물성 및 전극특성 (Electrode properties upon the substitution of Mo for Mn in Zr-basd AB2-type Hydrogen Storage Alloys)

  • 서찬열;박충년
    • 한국수소및신에너지학회논문집
    • /
    • 제11권4호
    • /
    • pp.189-202
    • /
    • 2000
  • $AB_2$ type Zr-based Laves phases alloys have been studied for potential application as a negative electrode in a Ni-MH battery. The $AB_2$-type electrodes have a much higher energy density than $AB_5$-type electrodes per weight, however they have some disadvantages such as poor activation behavior and cycle life etc. Nonetheless, the $AB_2$-type electrodes have been studied very extensively due to their high energy density. In this study, in order to develop the cycle life, the Mn of $AB_2$ alloy composition was substituted partially by Mo. The alloys were melted by arc furnace and remelted 4-5 times for homogeneity. The alloy powder was used below 200-325 mesh for experiments. The structures and phases of the alloys were analyzed by XRD, SEM and EDS, and measured the curve of a pressure-composition isotherms. The electrodes were prepared by cold pressing of the copper-coated(25 wt%) alloy powders, and tested by a half cell. The results are summarized as follows. The cycle life was improved with the increase of Mo amount in $Zr_{1-x}Ti_xV_{0.4}Ni_{1.2}Mn_{0.4}Mo_y$(x=0.3, 0.4) and the activation was faster, whereas the discharge capacity decreased.

  • PDF

Screen Printing법을 이용한 압전 후막의 제조 및 특성연구 (Fabrication and Characterization of piezoelectric thick films prepared by Screen Printing Method)

  • 김상종;최형욱;백동수;최지원;윤석진;김현재
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 하계학술대회 논문집
    • /
    • pp.873-876
    • /
    • 2000
  • Characteristics of piezoelectric thick films prepared by screen printing method were investigated. The piezoelectric thick films were printed using Pb(Mg,Nb)O$_3$-Pb(Zr,Ti)O$_3$system. The lower electrodes were coated with various thickness of Ag-Pd by screen printing to investigate the effect as a diffusion barrier and deposited with Pt by sputtering on Ag-Pd. The ceramic paste was prepared by mixing powder and binder with various ratios using three roll miller. The fabricated thick films were burned out at 650$^{\circ}C$ and sintered at 950$^{\circ}C$ in the O$_2$condition for each 20, 60min after printing with 350mesh screen. The thickness of piezoelectric thick film was 15∼20 $\mu\textrm{m}$ and the Ag-Pd electrode acted as a diffusion barrier above 3 $\mu\textrm{m}$ thickness. When the lower electrode Ag-Pd was 6 $\mu\textrm{m}$ and the piezoelectric thick films were sintered by 2nd step (650$^{\circ}C$/20min and 950$^{\circ}C$/1h) using paste mixed Pb(Mg,Nb)O$_3$-Pb(Zr,Ti)O$_3$$.$ MnO$_2$+ Bi$_2$O$_3$. V$_2$O$\_$5/ and binder in the ratio of 70:30, the remnant polarization of thick film was 9.1 ${\mu}$C /cm$^2$.

  • PDF