• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.91-94
• /
• 1999

A new type of high-T$_c$ superconducting Josephson junctions has been prepared by Ar ion beam etching and electron beam lithography. YBa$_2Cu_3O_{7-x}$ (YBCO) films deposited on (001) SrTiO$_3$ single crystal substrate by pulsed laser deposition were patterned by Ar ion milling with photolithography. The narrow slit with a electroresist mask, about 1000 ${\AA}$ wide, was constructed over a 3 ${\sim}$ 5 ${\mu}$m bridge of a 1200-${\AA}$-thick YBCO film by electron beam lithography. The slit was then etched by the Ar ion beam to form a damaged 600-${\AA}$-thick YBCO. Thus prepared structure forms an S-N-S (YBCO - damaged YBCO - YBCO) type Josephson junctions. Those junctions exhibit RSI-like I-V characteristics at 77 K. The properties of the Josephson junctions such as I$_c$ R$_N$, and J$_c$ were characterized.

• Journal of the Korean Vacuum Society
• /
• v.4 no.S2
• /
• pp.131-138
• /
• 1995

The broad beam ion sources of hot filament plasma type have widely used for modifications of materials and thin films, and the new type intensive current broad beam metal ion source including reactive gaseous ion beams is needed for preparing the hard coating films such as DLC, $\beta-C_3N_4$ Carbides, Nitrides, Borides etc. Now a electorn beam evaporation(EBE) broad beam metal ion source has been developed for this purpose in our lab. CN film has been formed by the EBE ion source. Study of the CN film shows that it has high hardness(HK=5800kgf/$\textrm {mm}^2$)and good adhesion. This method can widely changes the ratio of C/N atom's concentrations from 0.14 to 0.6 and has high coating rate. The low energy pocket ion source which was specially designed for surface texturing of medical silicon rubber was also developed. It has high efficiency and large uniform working zone. Both nature texturing and mesh masked texturing of silicon rubbers were performed. The biocompatibility was tested by culture of monocytes, and the results showed improved biocompatibility for the treated silicon rubbers. In addition, the TiB2 film synthesized by IBED is being studied recently in our lab. In this paper, the results which include the hardness, thickness of the films and the AES, XRD analysis as well as the tests of the oxidation of high temperature and erosion will be presented.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.30-37
• /
• 2014

In this paper, the compact model for FinFET gate resistance is developed. Based on the FinFET geometry and material, the value of the gate resistance is extracted by Y-parameter analysis using 3D device simulator, Sentaurus. By dividing the gate resistance into horizontal and vertical components, the proposed gate resistance model captures the non-linear characteristics. The proposed compact model reflects the realistic gate structure which has two different materials (Tungsten, TiN) stacked. Using the proposed model, the number of fins for the minimum gate resistance can be proposed based on the variation of gate geometrical parameters. The proposed gate resistance model is implemented in BSIM-CMG. A ring-oscillator is designed, and its delay performance is compared with and without gate resistance.

• Journal of the Korean Ceramic Society
• /
• v.40 no.1
• /
• pp.46-51
• /
• 2003

Ferroelectric $Sr_{0.7}Bi_{2.1}Ta_{2.0}O_9$ thin films with 200 nm thicknesses were deposited on $Pt/Ti/SiO_2/Si$ substrate by liquid delivery MOCVD process. In these experiments, $Sr(TMHD)_2{\cdot}pmdeta,\; Bi(ph)_3$ and $Ta(O^i/Pr)_4(TMHD)$ were used as precursors, which were dissolved in n-butyl acetate and pentamethyldiethylenetriamine. Substrate temperature and reactor pressure of this experiment was $570^{\circ}C$and 5 Torr, respectively. The remanent polarization value (2Pr) of SBT thin film with annealed at $780^{\circ}C$was$7.247{\mu}C/cm^2$and$8.485 {\mu}C/cm^2$by applying 3 V and 5 V, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.2
• /
• pp.191-196
• /
• 2023

In this paper, for the application of ultrasonic cleaners for cleaning dentures and transparent braces, Pb(Mn_1/3Nb_2/3)O₃-Pb(Ni_1/3 Nb_2/3)O₃-Pb(Zr,Ti)O₃ [PMN-PNN-PZT] system ceramics were manufactured and their dielectric and piezoelectric properties were investigated. Overall the best properties suitable for the device applications such as ultrasonic cleaner were obtained from the ceramics sintered at 920℃: bulk density of 7.8 g/cm³, the dielectric constant (ε_r) of 1,689, piezoelectric charge constant (d₃₃) of 433 pC/N, planar electromechanical coupling factor (k_p) of 0.64, mechanical quality factor (Qm) of 835, S₁₁^E of 13.37 (10^-12 N/m²), and Curie temperature of 315℃ By using the physical properties of this composition, the ultrasonic cleaner was designed and simulated using the commercial ATILA software. For the three-layered ceramics with the dimension of 25 mm × 25 mm × 2.5mm, an excellent displacement of 8.998 10^-3 m) and the sound pressure of 147.68 dB were recorded.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.5
• /
• pp.392-399
• /
• 2015

PURPOSE. The aim of this study was to evaluate the effect of metal primers on the bonding of dental alloys and veneer resin. Polyvinylpyrrolidone solution's tarnish effect on bonding strength was also investigated. MATERIALS AND METHODS. Disk-shape metal specimens (diameter 8 mm, thickness 1.5 mm) were made from 3 kinds of alloy (Co-Cr, Ti and Au-Ag-Pd alloy) and divided into 4 groups per each alloy. Half specimens (n=12 per group) in tarnished group were immersed into polyvinylpyrrolidone solution for 24 hours. In Co-Cr and Ti-alloy, Alloy Primer (MDP + VBATDT) and MAC-Bond II (MAC-10) were applied, while Alloy Primer and V-Primer (VBATDT) were applied to Au-Ag-Pd alloys. After surface treatment, veneering composite resin were applied and shear bond strength test were conducted. RESULTS. Alloy Primer showed higher shear bond strength than MAC-Bond II in Co-Cr alloys and Au-Ag-Pd alloy (P<.05). However, in Ti alloy, there was no significant difference between Alloy Primer and MAC-Bond II. Tarnished Co-Cr and Au-Ag-Pd alloy surfaces presented significantly decreased shear bond strength. CONCLUSION. Combined use of MDP and VBATDT were effective in bonding of the resin to Co-Cr and Au-Ag-Pd alloy. Tarnish using polyvinylpyrrolidone solution negatively affected on the bonding of veneer resin to Co-Cr and Au-Ag-Pd alloys.

• Korean Journal of Materials Research
• /
• v.20 no.3
• /
• pp.167-173
• /
• 2010

In this study, we used activated carbon (AC) and titanium oxysulfate as a titanium precursor to prepare carbon/titania composites. We then mixed it with bentonite in different ratios to make a carbon/titania/bentonite monolith for use in architecture bricks by using Phenolic rosin (PR) as a bonding agent. The physicochemical properties of the prepared composites were analyzed by BET surface area, scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX), self-cleaning effect and bactericidal tests. The BET surface areas increased as the ratio of carbon/titania composites increased. The SEM microscopy showed that the $TiO_2$ and bentonite were coated on the surface of the AC. The XRD patterns showed a mixture structure of anatase and rutile of $TiO_2$ with a clear $SiO_2$ structure. The EDX spectra of the carbon/titania/bentonite monolith confirmed the presence of various elements, namely C, O, Ti and Si, as well as other, impure elements. Moreover, to determine the self-cleaning effect of the carbon/titania/bentonite monolith, we used methylene blue (MB, $C_{16}H_{18}N_3S{\cdot}Cl{\cdot}3H_2O$) in an aqueous solution under the irradiation of visible light. Accordingly, all of the samples had excellent degradation of the MB solution. Furthermore, it was observed that the composites with sunlight irradiation had a greater effect on E. coli than any other experimental conditions.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1242-1244
• /
• 1995

The dielectric and polarizable properties of $0.9Pb_{1-x}La_x({Mg}_{1/3}Nb_{2/3})O_3-0.1PbTiO_3$ (x=0,1,2,3,4,5) have been investigated. The temperature-dependant electrostictive characteristics of 0.9PMN-0.1PT relaxor ferroelectric system were improved by enhencing the extent of the diffuse phase transition(DPT). This was achieved using PMN-PTceramics by the partial substitution of La at the Pb site. The curie temperature and the maximum dielectric permittivity decreased by substituting La and the electric field-related hysteresis phenomena decreased with increasing La substitution amount.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.293-295
• /
• 1991

In this study, we investigated the possibilty that $Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3-PbZrO_3$ ceramics with strontium substitutions could be used for piezoelectric sounders. Piezoelectric buzzer is one of them. By partially substituting Sr for Ph, dielectric constants had values greater than 2000, the value proper piezoelectric buzzer, piezoelectric constant($d_{31}$) had a maximum value, 298 $[10^{-12}C/N]$, at the Sr 5 mol % substitution. Sound level of piezoelectric buzzer had the highest value of 91 dB at the Sr 5 mol % substitution.

• Journal of applied mathematics & informatics
• /
• v.8 no.1
• /
• pp.9-26
• /
• 2001

In some previous papers the author extended two algorithms proposed by Z. Kovarik for approximate orthogonalization of a finite set of linearly independent vectors from a Hibert space, to the case when the vectors are rows (not necessary linearly independent) of an arbitrary rectangular matrix. In this paper we describe combinations between these two methods and the classical Kaczmarz’s iteration. We prove that, in the case of a consistent least-squares problem, the new algorithms so obtained converge ti any of its solutions (depending on the initial approximation). The numerical experiments described in the last section of the paper on a problem obtained after the discretization of a first kind integral equation ilustrate the fast convergence of the new algorithms. AMS Mathematics Subject Classification : 65F10, 65F20.