Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on fabrication of Ferroelectric SBT Thin Films by Liquid Delivery MOCVD Process

Liquid Delivery MOCVD 공정을 이용한 강유전체 SBT 박막의 제조기술에 관한 연구

  • 강동균 (고려대학교 재료공학과) ;
  • 백승규 (고려대학교 재료공학과) ;
  • 송석표 (고려대학교 재료공학과) ;
  • 김병호 (고려대학교 재료공학과)
  • Published : 2003.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

Ferroelectric $Sr_{0.7}Bi_{2.1}Ta_{2.0}O_9$ thin films with 200 nm thicknesses were deposited on $Pt/Ti/SiO_2/Si$ substrate by liquid delivery MOCVD process. In these experiments, $Sr(TMHD)_2{\cdot}pmdeta,\; Bi(ph)_3$ and $Ta(O^i/Pr)_4(TMHD)$ were used as precursors, which were dissolved in n-butyl acetate and pentamethyldiethylenetriamine. Substrate temperature and reactor pressure of this experiment was $570^{\circ}C$and 5 Torr, respectively. The remanent polarization value (2Pr) of SBT thin film with annealed at $780^{\circ}C$was$7.247{\mu}C/cm^2$and$8.485 {\mu}C/cm^2$by applying 3 V and 5 V, respectively.

Liquid delivery MOCVD 공정으로 200nm 정도의 두께를 가진 강유전성 S $r_{0.7}$B $i_{2.1}$T $a_{2.0}$ $O_{9}$ 박막을 Pt/Ti/ $SiO_2$/Si 기판 위에 증착하였다. 본 실험에서는 Sr(TMHD)$_2$.pmdeta, Bi(ph)$_3$ 그리고 Ta( $O^{i}$ Pr)$_4$(TMHD)를 출발 물질로 사용하였으며 n-butyl acetate와 pentamethyldiethylenetriamine를 용매로 사용하였다. 이 실험의 기판 온도와 압력 조건은 각각 57$0^{\circ}C$와 5 Torr였다. 78$0^{\circ}C$에서 열처리한 SBT 박막의 3V와 5V 인가 전압하에서의 잔류분극값은 각각 7.247 $\mu$C/$\textrm{cm}^2$와 8.485 $\mu$C/$\textrm{cm}^2$이었다.다.다.

Keywords

References

  1. Mat. Res. Soc. Symp. Proc. v.433 Integration Aspects and Electrical Properties of $SrBi_2Ta_2O_9$ for Non-volatile Memory Applications D. J. Taylor;R. E. Jones;Y. T. Lii;P. Zurcher;P. Y. Chu;S. J. Gillespie https://doi.org/10.1557/PROC-433-97
  2. Ferroelectric Thin Films in Ferroelectric Materials and their Applications Y. Xu
  3. Integrated Ferroelectrics v.15 A Critical Comparative Review of PZT and SBT-based Science and Technology for Non-volatile Ferroelectric Memories O. Auciello https://doi.org/10.1080/10584589708015712
  4. Jpn. J. Appl. Phy. v.32 Evaluation of Imprint Properties in Sol-gel Ferroelectric$Pb(Zr,Ti)O_3$ T. Mihara;H. Watanabe;C. A. Paz de Araujo https://doi.org/10.1143/JJAP.32.4168
  5. Nature v.374 Fatiguefree Ferroelectric Capacitors with Platinum Electrode C. A-Paz de Araujo;J. D. Cuchiaro;L. D. McMillan;M. C. Scott;J. F. Scott https://doi.org/10.1038/374627a0
  6. Jpn. J. Appl. Phys. v.34 Characteristics of Bismuths Layered$SrBi_2Ta_2O_9$Thin-film Capacitors and Comparison with $Pb(Zr,Ti)O_3$ T. Mihara;H. Yosimori;H. Watanabe;C. A. Paz de Araujo https://doi.org/10.1143/JJAP.34.5233
  7. Integrated Ferroelectrics v.30 Low Temperature Process for Strontium Bismuth Tantalate Thin Films J. Celinska;V. Joshi;S. Narayan;L. D. McMillan;C. A. Paz De Araujo https://doi.org/10.1080/10584580008222247
  8. Integrated Ferroelectrics v.26 A Study on Low-temperature Crystallization of $SrBi_2Ta_2O_9$ Thin Films Prepared by Sol-gel Method Using Steam Curing Process Y. Sawada;H. Kobari;Y. Sato;A. Hashimoto;I. Koiwa;H. Kobayashi;T. Osaka https://doi.org/10.1080/10584589908215621
  9. Appl. Phys. Lett. v.75 Growth and Characterization of $SrBi_2Nb_2O_9$ Thin Films by Pulsed Laser Ablation S. Bhattacharyya;S. S. N. Bharadwaja https://doi.org/10.1063/1.125109
  10. J. Appl. Phys. v.81 Single-crystal $Pb(Zr_xTi_{1-x})O_3$ Thin Films Prepared by Metal-organic Chemical Vapor Deposition : Systematic Compositional Variation of Electronic and Optical Properties Foster, C. M.(et al.) https://doi.org/10.1063/1.364239
  11. Appl. Phys. Lett. v.68 Metalorganic Chemical Vapor Deposition of Ferroelectric $SrBi_2Ta_2O_9$ Thin Film T. Li;Y. Zhu;S. B. Desu https://doi.org/10.1063/1.116486
  12. J. Appl. Phys. v.67 Organometallic Chemical Vapor Deposition of Strontium Titanate W. A. Feil;B. W. Wessels;L. M. Tonge;T. J. Marks https://doi.org/10.1063/1.345034

Cited by

  1. An Improved Synthesis and Isolation of Tribenzylbismuth vol.184, pp.1, 2008, https://doi.org/10.1080/10426500802077127