• 한국세라믹학회지
• /
• 제41권11호
• /
• pp.842-850
• /
• 2004

BaO$_2$-TiO$_2$-환원제-입자제어제계에서 자전연소합성법을 이용한 BaTiO$_3$ 분말의 제조에 대하여 고찰하였다. 환원제로서 C, Mg를 사용하였고, 입자제어제로서 NaCl을 사용하였다. 자전연소합성법을 이용한 BaTiO$_3$ 분말의 제조에 있어 최적의 반응계에서 환원제의 종류와 농도, 입자제어제, 반응량의 변화에 따른 생성물의 영향을 조사하였다. 최적의 반응계 및 조성은 Ae반응 분위기에서 BaO$_2$+TiO$_2$+0.1Mg+0.2C+0.75NaCl이었다. 희석제로서 첨가된 NaCl은 연소온도의 조절 뿐 아니라 반응생성물의 입도를 제어하는 효과를 나타냄을 알 수 있었다. 최적의 조건에서 제조된 순수 BaTiO$_3$ 분말의 입도는 약 0.5 $mu extrm{m}$ 이하였으며, 반응량을 증가시킬수록 균일한 반응성을 나타내었다 제조된 BaTiO$_3$ 분말의 유전특성을 측정하기 위하여 130$0^{\circ}C$, 2시간동안 대기중에서 소결실험을 행하였고 이때 상온에서의 유전상수는 약 2290이었고, 큐리점(129$^{\circ}C$)에서의 유전상수는 약 13800을 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1774-1776
• /
• 1999

The (1-x)$MgTiO_3-SrTiO_3$ (x=0,0.1,0.2,0.3) ceramics were prepared by the conventional mixed oxide method. The structural properties were investigated with sintering temperature and composition ratio by XRD, SEM and DT-TGA. Increasing the sintering temperature from $1300^{\circ}C$ to $1600^{\circ}C$, second phase was decreased and grain size was increased. The average grain size of the $0.8MgTiO_3-0.2SrTiO_3$ ceramics sintered at $1600^{\circ}C$ were $3.61{\mu}m$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.953-955
• /
• 1999

The (1-x)$MgTiO_3-SrTiO_3$ (x=0. 0.1, 0.2, 0.3) ceramics were prepared by the conventional mixed oxide method. The structural properties were investigated with sintering temperature and composition ratio by XRD, SEM and BT-TGA. Increasing the sintering temperature from $1300^{\circ}C$ to $1600^{\circ}C$, second phase was decreased and grain size was increased. The average gram size of the 0.8$MgTiO_3-SrTiO_3$ ceramics sintered at $1600^{\circ}C$ were $3.61{\mu}m$.

• 한국세라믹학회지
• /
• 제29권9호
• /
• pp.675-680
• /
• 1992

The purpose of this investigation was to study the stability of perovskite structure, the variation of electrical properties and a microstructure with varing amount of PbTiO3 additive in PZN-PT-BT system. The results are as follows: 1. The pyrochlore phase was reduced as the amount of PbTiO3 additive was increased and completely eliminated at 0.15PT in PZN-PT-BT system. 2. The aging rate was increased in proportion to tetragonality because the internal stress was increased in proportion to tetragonality. 3. On increasing the amount of PbTiO3 additive, the Curie temperature was increased in proportion to tetragonality. 4. As the amount of PT in the composition increase, the variation of dielectric constant was sharpened and the diffuseness of the transition decreased.

• 한국세라믹학회지
• /
• 제31권9호
• /
• pp.1005-1011
• /
• 1994

The three different composition of BaTi4O9, Ba2Ti9O20 and BaTi5O11 were prepared by coprecipitation process, and then the dielectric properties of these compounds were measured at low microwave frequencies. The powder showing high level of purity was synthesised by the coprecipition reaction of BaCl2 and TiCl4 where (NH4)2CO3 and NH4OH were used as a deflocculent. Followings are the result of this study: 1. The sintering temperature increased with increasing TiO2 content. 2. BaTi4O9 powder were synthesized as a single phase by this processing technique, but the resultant Ba2Ti9O20 and BaTi5O11 phase existed with Ba2Ti9O20 and BaTi5O11 phases. 3. Single phase BaTi4O9 showed high dielectric constant value of 35, high Q value of 8100.

• 한국전자통신학회논문지
• /
• 제15권1호
• /
• pp.39-44
• /
• 2020

유리기판위에 스퍼터링법으로 비정질 BaTiO₃막을 증착시켰다. 증착된 BaTiO₃ 막을 코로나 폴링을 하여 광학적 특성을 조사하였다. 가시광영역에서 투과율은 80% 이상으로 좋았으며, 비선형광학 특성은 폴링 조건에 따라 영향을 받으며, 크기는 1.15pm/V였다. 장기특성도 한달이 지나도 60%이상 유지하였다. 또한 BaTiO₃ 박막으로부터 녹색광 발생을 확인하였다.

• 한국세라믹학회지
• /
• 제33권4호
• /
• pp.448-454
• /
• 1996

BaTiO3 세라믹스의 입방정과 육방정간의 상전이에 따른 미세조직 변화를 관찰하였다. 입방정을 육방정영역에서 열처리하는 경우, 시편 표면부터 육방정상이 생성되었고 반대로 육방정을 입방정역에서 열처리하여 상전이 시킬때는 입방정상이 시편이 중심부에서부터 생성되었다. 또한 이러한 상전이 과정 중에는 빠른 입성장과 더불어 불규칙적인 입계형태를 나타내었다. 그 외 낮은 성형압으로 소결체의 밀도가 낮은 육방정 시편을 제조한 경우에는 상대적으로 입방정으로의 상전이가 억제되었다. 이러한 결과들은 육방정의 표면에너지가 입방정보다 상대적으로 낮기 때문으로 해석되었다.

• 한국재료학회지
• /
• 제24권4호
• /
• pp.207-213
• /
• 2014

Flexible $BaTiO_3$ films as dielectric materials for high energy density capacitors were deposited on polyethylene terephthalate (PET) substrates by r.f. magnetron sputtering. The growth behavior, microstructure and electrical properties of the flexible $BaTiO_3$ films were dependent on the sputtering pressure during sputtering. The RMS roughness and crystallite size of the $BaTiO_3$ increased with increasing sputtering pressure. All $BaTiO_3$ films had an amorphous structure, regardless of the sputtering pressures, due to the low PET substrate temperature. The composition of films showed an atomic ratio (Ba:Ti:O) of 0.9:1.1:3. The electrical properties of the $BaTiO_3$ films were affected by the microstructure and roughness. The $BaTiO_3$ films prepared at 100 mTorr exhibited a dielectric constant of ~80 at 1 kHz and a leakage current of $10^{-8}A$ at 400 kV/cm. Also, films showed polarization of $8{\mu}C/cm^2$ at 100 kV/cm and remnant polarization ($P_r$) of $2{\mu}C/cm^2$. This suggests that sputter deposited flexible $BaTiO_3$ films are a promising dielectric that can be used in high energy density capacitors owing to their high dielectric constant, low leakage current and stable preparation by sputtering.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.430-433
• /
• 2001

The $0.96MgTiO_{3}-0.04SrTiO_{3}+xCe(x=0{\sim}1.6wt%)$ ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were $1300^{\circ}C$, 2hr., respectively. From the X-ray diffraction patterns, it was found that the perovskite $SrTiO_{3}$ and ilmenite $MgTiO_{3}$ structures were coexisted in the $0.96MgTiO_{3}-0.04SrTiO_{3}+xCe(x=0{\sim}1.6wt%)$ ceramics. The dielectric constant$(\varepsilon_{r})$ was increased with addition of Ce. The temperature coefficient of resonant frequency$(\Gamma_{f})$ was gradually varied from positive value to the negative value with increasing the Ce. The temperature coefficient of resonant frequency of the $0.96MgTiO_{3}-0.04SrTiO_{3}+0.2Ce$ ceramics was near zero, where the dielectric constant, quality factor, and $\Gamma_{f}$ were 20.68, 50,272 and ${-0.5ppm/^{\circ}C}$, respectively.

• 한국분말재료학회지
• /
• 제19권4호
• /
• pp.310-316
• /
• 2012

Nanocrystalline $BaTiO_3$ powder could be synthesized by solid-state reaction using the mixture which was prepared by a high energy milling process in a bead mill for $BaCO_3$ and nanocrystalline $TiO_2$ powders mixture. Effect of the milling time on the powder characteristic of the synthesized $BaTiO_3$ powder was investigated. Nanocrystalline $BaTiO_3$ with a particle size of 50 nm was obtained at $800^{\circ}C$. High tetragonal $BaTiO_3$ powder with a tetragonality(=c/a) of 1.009 and a specific surface area of $7.6m^2/g$ was acquired after heat-treatment at $950^{\circ}C$ for 2 h. High energy ball milling was effective in decreasing the reaction temperature and increasing the tetragonality.