• 제목/요약/키워드: Thulium

검색결과 32건 처리시간 0.028초

ICP-MS에 의한 형광체용 $(Y,\;Eu)_2O_3$ 중 불순물 분석 연구 (The analysis of impurities in rare earth oxide for fluorescent substance by ICP-MS)

  • 김상경;장승규
    • 분석과학
    • /
    • 제7권1호
    • /
    • pp.1-10
    • /
    • 1994
  • 형광체의 원료로 사용되고 있는 희토 산화물 중 불순물로 존재하는 희토류 원소를 분석하기 위하여 검출한계, 재현성, matrix effect, linear dynamic range 및 yttrium과 europium의 memory effect를 조사하였다. 유도결합 플라즈마 질량분석법(ICP-MS)에 의해 thulium의 정량분석시 europium이 존재함으로써 플라즈마 내에 polyatomic ion인 $EuO^+$이 형성되고, 이로 인해 thulium에 영향을 끼침을 확인할 수 있었다. Europium의 농도에 따른 thulium의 세기가 직선적으로 변화함을 이용하여 thulium의 실제 농도를 결정할 수 있었다.

  • PDF

Thulium이 첨가된 Upconversion 광섬유 Blue Laser 개발 (Development of the Thulium Doped Upconversion Fiber Blue Laser)

  • 황대석;김규식;허창우;이영우
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2003년도 추계종합학술대회
    • /
    • pp.439-441
    • /
    • 2003
  • 본 연구에서는 Thulium(Tm$^{3+}$ )이 첨가된 광섬유를 이용, Upconversion blue 레이저의 개발을 위해 fiber 길이 및 파워 변화에 따른 최적화된 설계 기준 값을 찾기 위한 시뮬레이션 코드를 개발하고 그 해석을 행하였다. 1140nm의 여기광원을 이용하여 여기하였을 때 광섬유 길이 40cm에서 약 100mW의 발진 문턱값을 갖으며 1W의 여기 광원에 대해 60mW의 출력 특성이 예상된다.

  • PDF

Thulium이 도핑된 광섬유 증폭기의 과도현상에 관한 연구 (A Study of the Transient Effect at the Thulium-doped Optical Fiber Amplifier)

  • 이재명;이영우
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2001년도 추계종합학술대회
    • /
    • pp.349-352
    • /
    • 2001
  • 본 논문에서는 1400nm 대역에서 이득을 갖는 TDFA의 증폭 특성과 과도응답 특성을 이론적으로 해석하였다. 수치모델은 밀도반전의 형성과정, 여기파워, 증폭기를 따라 변화하는 신호파워를 포함한다. 본 이론해석의 결과는 광섬유증폭기의 이득 포화와 복구시간을 예측할 수 있게 해주고, 펌핑율과 포화 율이 이득의 포화와 복구시간에 미치는 영향을 예측할 수 있게 한다.

  • PDF

S/S+band에서 넓은 파장가변 영역을 가지고 50-GHz ITU-T격자에 맞는 채널을 생성하는 thulium이 첨가된 광섬유 레이저 (Widely tunable thulium-doped fiber laser anchored on 50-GHz ITU-T grid in S/S+ band)

  • 안성준;박철근;안승준;박종한;박남규
    • 한국광학회지
    • /
    • 제15권1호
    • /
    • pp.17-21
    • /
    • 2004
  • S/S+band에서 ITU-T의 50 ㎓격자에 맞는 채널을 가지는 광대역 파장가변 thulium첨가 광섬유레이저(TTDFL)를 개발하였다. 1.4$\mu\textrm{m}$$1.5\mu\textrm{m}$두 대역의 광원으로 펌핑되는 thulium첨가 광섬유(TDF)의 반전에 관한 분석을 통해, 대부분의 S/S+band에서 파장을 가변할 수 있는 레이저를 구현하였다. 이 파장가변 레이저는 65.1nm의 넓은 3-㏈ 대역폭 내에서 6.7㏈m이상의 평탄한 출력 스펙트럼을 보여주었고, 생성된 DWDM채널 수는 178개에 달하였다. 또한 보조 펌프의 출력을 더 높일경우 66.2 nm까지도 대역폭을 넓힐 수 있었고, 공진기 내부 필터의 온도를 조절함으로써 레이저의 주파수를 더욱 안정화 할 수 있음도 보였다. 본 연구에서 개발된 이 레이저는 S/S+band에서 기준 파장을 제공하는 유용한 광원으로 활용될 수 있다.

Optical Stimulation and Pacing of the Embryonic Chicken Heart via Thulium Laser Irradiation

  • Chung, Hong;Chung, Euiheon
    • Current Optics and Photonics
    • /
    • 제3권1호
    • /
    • pp.1-7
    • /
    • 2019
  • Optical stimulation provides a promising alternative to electrical stimulation to selectively modulate tissue. However, developing noninvasive techniques to directly stimulate excitable tissue without introducing genetic modifications and minimizing cellular stress remains an ongoing challenge. Infrared (IR) light has been used to achieve optical pacing for electrophysiological studies in embryonic quail and mammalian hearts. Here, we demonstrate optical stimulation and pacing of the embryonic chicken heart using a pulsed infrared thulium laser with a wavelength of 1927 nm. By recording stereomicroscope outputs and quantifying heart rates and movements through video processing, we found that heart rate increases instantly following irradiation with a large spot size and high radiant exposure. Targeting the atrium using a smaller spot size and lower radiant exposure achieved pacing, as the heart rate synchronized with the laser to 2 Hz. This study demonstrates the viability of using the 1927 nm thulium laser for cardiac stimulation and optical pacing, expanding the optical parameters and IR lasers that can be used to modulate cardiac dynamics.

200-W Continuous-wave Thulium-doped All-fiber Laser at 2050 nm

  • Shin, Jae Sung;Cha, Yong-Ho;Chun, Byung Jae;Jeong, Do-Young;Park, Hyunmin
    • Current Optics and Photonics
    • /
    • 제5권3호
    • /
    • pp.306-310
    • /
    • 2021
  • A 200-W continuous-wave thulium-doped all-fiber laser at 2050 nm was developed with a master oscillator power amplifier configuration. For the master oscillator, a single-mode thulium-doped fiber laser was built with fiber Bragg gratings. The operating power of the oscillator was 10.1 W at a pump power of 20.9 W, and the slope efficiency was measured to be 53.0%. All emitted wavelengths of the oscillator were located between 2049.2 nm and 2049.9 nm, and no other peaks in different wavelength ranges were observed. The maximum output power of the final amplified beam was 204.6 W at a pump power of 350.4 W. The slope efficiency of the amplifier was measured to be 58.4%.

금 증착 측면연마 광섬유를 이용한 1.93㎛ 모드잠금 펨토초 전광섬유 MOPA 레이저 (Passively Mode-Locked 1.93-㎛ All-Fiberized Femtosecond MOPA Laser Using a Gold-Deposited Side-Polished Fiber)

  • 정민완;구준회;이주한
    • 한국광학회지
    • /
    • 제25권6호
    • /
    • pp.340-345
    • /
    • 2014
  • 본 논문에서는 금이 증착된 측면연마 광섬유를 $2{\mu}m$ 대역 편광기로 이용하여 Thulium/Holmium 첨가 광섬유 기반 링 캐비티로부터 모드 잠금 레이저를 구현할 수 있음을 실험적으로 보였다. 모드 잠금 현상은 광섬유로 구성된 공진기 내부에서 진행하는 빔이 겪는 Nonlinear Polarization Rotation 현상에 기반하여 삽입된 금 증착 측면연마 광섬유에서 발생되는 Nonlinear Transmission 반응에 의해 유도되었다. 또한 공진기로부터 발생되는 출력 $1.93{\mu}m$ 파장의 광펄스를 Thulium/Holmium 첨가 광섬유 증폭기를 통과시켜 Higher Order Soliton Effect를 통해 압축시킴으로써 최대 첨두 출력 ~6.7 kW를 갖는 펄스폭 ~558 fs의 고출력 펨토초 펄스를 얻을 수 있음을 실험적으로 보였다.

$Tm^{3+}$가 첨가된 광섬유 증폭기의 이득회복 특성 (A Study of the Gain Recovery Properties at the Thulium-doped fiber Amplifier)

  • 이재명;황대석;김규식;이영우
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2002년도 추계종합학술대회
    • /
    • pp.533-534
    • /
    • 2002
  • 본 논문에서는 1.47$\mu\textrm{m}$ 대역에서 증폭 특성을 갖는 TDFA(Thulium-Doped Fiber Amplifier)의 WDM 적용시 short pulse 열을 인가할 경우 발생할 수 있는 이득 포화 및 복구의 시간적 한계를 이론적으로 해석하였다. 펄스열의 간격과 펌프 파워, 그리고 펄스 간격에 따른 이득 포화 및 복구 시간이 광 펄스의 증폭에 미치는 영향을 예측할 수 있었다.

  • PDF

40-W 200-ns 300-kHz Thulium-doped Fiber Laser at 2050 nm

  • Shin, Jae Sung;Cha, Yong-Ho;Chun, Byung Jae;Park, Hyunmin
    • Current Optics and Photonics
    • /
    • 제5권5호
    • /
    • pp.544-553
    • /
    • 2021
  • A 40-W 200-ns 300-kHz thulium-doped fiber laser at 2050 nm with a master oscillator power amplifier configuration was developed, for application to lithium-isotope separation. The master oscillator generated a 5.35 W continuous-wave beam, which the pulse generator then broke into 200-ns pulses at 300 kHz. Then, the laser beam was amplified by passing through a two-stage amplifier. The output power finally obtained was 42.0 W at 2050 nm, and was stable for a long time, over 2 hours. In spite of this achievement, mode instability was observed in the output beam. This can be solved in the future by using a method such as tight coiling.