• Korean Journal of Applied Biomechanics
• /
• v.17 no.3
• /
• pp.95-103
• /
• 2007

The purpose of this study is Muscle Activity for the Upper Extremity and Morto-Seoinage(Two-handed shoulder throw) according to performance levels and elite judo players (G1) and non-elite judo players, namely university players (G2). To achieve this purpose, three players in G1 whose main special skill was Morote-Seoinage and three university judo players(G2) were selected as comparative group. After analysing this study, conclusions were derived as follows. 1. Muscle activity of musculi membri superious to group of Kuzushi to Tsukuri was the highest in left biceps brachii and right biceps brachii in order. On the other hand, G2 was the highest in left biceps brachii and left flexer carpi randialis in order. 2. Intergral electromyogram of according to the phase showed right triceps 1P of left flexer carpi radialis. G1 and G2 of showed left biceps brachii was the highest in 1P and 2P. As a result, extra training of left flexer carpi radialis and left biceps brachii is needed.

• The Journal of Korean Society for Neurotherapy
• /
• v.22 no.3
• /
• pp.25-29
• /
• 2018

Purpose In this study, 45 students were divided into task - oriented group, task - oriented intermittent group, and continuous group, and the effect of each variable on learning was changed to angle of the arms' we checked. Methods This study was conducted for 45 days from March 13 to 18, 2017 for five days in the 20 generals living in Changwon city. Dart and goniometer were used for the measurement. In the exercise program, darts were placed on a smooth, hard surface of 1.5M height and the distance to the subject was set 1.5m away. In the dart throw practice, all three groups were marked with an elbow flexion $30^{\circ}$ on the wall, and the subjects were instructed to throw the dart at that point. Results Comparisons between groups showed significant differences between the continuous task-oriented training group and the intermittent task-oriented training group and the control group at the end of training (*** P <0.001). Conclusion This study showed that the intermittent task-oriented training method showed the highest effect (*** P <0.001), which proved that the intermittent method is the most effective exercise method among the three groups.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.16 no.27
• /
• pp.1-10
• /
• 1993

This study aims to find the creative management system for the Company-Wide Creativity Development(CWCD). And this study consider managemant culture to find CWCD system because managemant culture have influence on the specific character of the personality and beheavior of the system member. To consider managemant culture, this study attempt to compare Korea managemant culture with America, Japanese managemant culture. Through this study we know that we must throw the authoritarianism, the egoism and try to resurrect Korean independence to find CWCD system in korea companies.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.873-876
• /
• 2001

Micro-robots using microprocessor are mainly classified as line-tracer, micro-mouse, and war-robot. This paper presents the development of the war-robot mechanism with vehicle-style using RC-servo motors and actuators using 4-bar linkage and infrared sensors. Especially the algorithm of conquering other war-robots is proposed based on the skill of belly-throw of Korean wrestling.

• 한국데이터정보과학회:학술대회논문집
• /
• 2004.04a
• /
• pp.225-236
• /
• 2004

Every web server comprises a repository of all actions and events that occur on the server. Server logs can be used to quantify user traffic. Intelligent analysis of this data provides a statistical baseline that can be used to determine server load, failed requests and other events that throw light on site usage patterns. This information provides valuable leads on marketing and site management activities. In this paper, we propose a method of design for log analysis system using RTMA(realtime monitoring and analysis) technique.

• Journal of KSNVE
• /
• v.4 no.2
• /
• pp.147-154
• /
• 1994

In this study, ultransonic vibration cutting system was contructed by installing throw-away-tool tip (KT 350) by screw lock on the bending vibration mode in free-free beam. During the conventional cutting and ultransonic conventional cutting of SM45C, variations of cutting force, roughness and acceleration were measured. The results were compared and analyzed in detail, and it was found that the ultransonic vibration cutting was more effective in reducing cutting force compareed with the conventional cutting .

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4375-4380
• /
• 2015

This study was performed to evaluate a newly proposed heating process of blank, which was used for Crank throw in the diesel engine, and provide design guidelines of heating processes. Non-linear numerical analyses were done using ANSYS program to investigate temperature and thermal stress distributions of blank during heating processes. The heating process consists of two stages; one is a heating stage with 20 hours, and the other is a holding stage with 12 hours, totaling 32-hour heating time. Based on analysis results, it was found that the temperature difference between the center and the surface of blank increased linearly during the heating stage but decreased gradually during the holding stage of heating processes, while max. equivalent stress, $12.5kg/mm^2$, was found at the center of blank after 10-hour heating time. As the guideline of blank heating process, it was recommended to keep the temperature difference between the center and the surface of blank to be within $150^{\circ}C$ when the environment temperature in furnace reaches $650^{\circ}C$ during a heating stage.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.2
• /
• pp.167-183
• /
• 2005

The purpose of this study was to analyze the kinetical variables of the lower extremity joints when performing uchimata(inner thigh reaping throw) by uke(receiver)'s two posture(shizenhon tai), jigohon tai), by voluntary resistance level(VRL) in judo. The subjects, who were for 3 male Korean national representative judokas(elite group : EG) and 3 male representative judokas of Korean University(non-elite group: NEG), and were filmed 4 DV video cameras(60fields/sec.), that posture of uke were shizenhon-tai (straight natural posture), jigohon-tai(straight defensive posture), VRL of uke was 0%. The selected trials were subject to 3-dimensional film motion analysis and ground reaction force(MRF) analysis. The kinetical variable of this study were temporal, postures( ankle and knee angle of attacking leg), that were computed through video film analysis, MRF at events were obtained from the ground-reaction force analysis by AMTI force plate system. When performing uchi-mata according to each posture and by VRL, from the data analysis and discussion, the conclusions were as follows : 1) Temporal variables : total time-required(TR) when performing uchi-mata was shown EG 0.13sec the shorter than NEG(o.77sec.) in shizenhon-tai. and EG 0.17sec the shorter than NEG(o.76sec.) in jigonhon-tai. Also, all of two groups' jigohon-tai(0.68sec.) were faster than shizenhon-tai(0.71 sec.). 2) The posture variables : The angle of ankle in attacking when performing were plantar flexion in EG, and dorsi flexion in NEG by shizenhon-tai and jigohon-tai posture. The angle of knee in attacking when performing were extension in EG and NEG, but range of extension in EG were larger than in NEG. 3) MRF : Vertical MRF when performing uchi-mata was shown the strongest in the 2nd stage of kake phase(2.23BW) by EG in both posture, and it was same value by NEG(2.23BW), but shizenhon-tai (2.28BW), jigohon-tai(1.64BW), respectively.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.19-23
• /
• 2001

In addition to landfilling and incineration, waste minimization and recycling have become priorities in Taiwan's municipal waste management strategies over the past 10 years. Major recycling initiatives being implemented in Taiwan include producer responsibility, "pay-as-you-throw, " and mandatory sorting provisions. Currently, the producer responsibility regime established under the Waste Disposal Act and administered by the Environmental Protection Administration (EPA) requires that manufacturers or importers of listed items, including containers, batteries. cars, motorcycles ("scooters"), tires, oil, televisions, refrigerators, air conditioners, washing machines, computers, and printers, pay recycling fees to government recycling funds. EPA then uses the recycling funds to subsidize collection and recycling. The 2001 recycling fund budget totals NT$57 billion (NT$35 = US$l). Under the producer responsibility regime, EPA-designated retailers ("sellers") must accept end-of-life items returned to them by the consumers. At the local level, Taipei City implements a pay-as-you-throw program, whereby citizens pay waste collection and treatment fees through the purchase of special trash bags approved by the Taipei City Government. However. recyclables that are separated by citizens are collected free-of-charge by the City. Taichung City and Kaohsiung City, on the other hand, enforce mandatory sorting schemes, whereby citizens face penalties if they don't separate recyclables from the trash before pick-up. These programs have resulted in a significant reduction in municipal waste. Per capita waste collected per day has dropped from 1.143 kg in 1997 to 0.978 kg in 2000. Targeting a 10% recycling rate for municipal waste in 2001. EPA plans to research and develop new recycling techniques, expand the scope of producer responsibilities, and strengthen existing municipal recyclable collection programs. To this end, among other initiatives, EPA has prepared a draft "Resource Recycling and Reuse Act" that would complement the existing producer responsibility programs by incorporating into the current recycling framework the concept of product life-cycle management.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.1
• /
• pp.47-55
• /
• 2011

The purpose of this study was to perform a kinematic analysis of Harai-goshi(hip throw) in superior female judo players. From our analysis, it appeared desirable for the player to shorten the duration of the technique for maximum results. It was also desirable for the player to draw the opponent backward while simultaneously maneuvering her close to her own body. A turning movement of the body toward the left side was found to be required for the technique, during which the player must lower the position of the center of gravity. During the subsequent angular change of the elbow, the player winds the elbow and, by moving the left shoulder, pulls the opponent toward her. The player lowers the body center by bending the left knee and letting the right knee extend, while turning the upper body and bending the hip joint. The player then draws the opponent in, contacts the opponent closely, turns, and stretches the right knee and hip joint rapidly and concisely, completing the move; it was also found to be desirable for the angular velocity to be increased for maximum efficacy.