• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.161-164
• /
• 2002

The increase of vehicles stagnations leads to the increasing attention to the way customers pay and a large number of projects on electronic cash system. Transport system is comprised of a number of advanced technologies, including information processing, communications, control, and electronics. Recently many research on a system which provides contact in order to protect driver's vehicle passage have been carried out. And some potential problems from that system are being reviewed by electronic cash system. In this papers, we suggest RF protocol developing technology using the concept of electronic cash. ATM electronic cash developing is consist of component of pre-developed coin throw, integration of component using its, and production of more requirement-satisfactory ITS solution. Result increase 15∼40% pre-type vehicles stagnations. Especially, we expect this proposed concept would be well adapted to our national environments.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.1
• /
• pp.16-20
• /
• 2017

A RF-MEMS (radio-frequency microelectromechanical-system) based DPDT (double pole double throw) switch for the Ku band has been designed and analyzed for this article. The switch topology is based on the FG-CPW (finite ground-coplanar waveguide) configuration of a microstrip-transmission line. An FEM-based multiphysics solver is used for the evaluation of the spring constant, stress distribution, and pull-in voltage regarding the requirements of the switch-beam unit. The electromagnetic performance of the switch is investigated for a $675{\mu}m$ thick silicon substrate. For the operational frequency of 14.5 GHz, an insertion loss better than -0.3 dB, a return loss better than -40 dB, and input/output- and output-port isolations better than -35 dB are achieved for the switching unit.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.8
• /
• pp.3085-3090
• /
• 2015

The telomeric end structures of the DNA are known to contain tandem repeats of TTAGGG sequence bound with specialised protein complex called the "shelterin complex". It comprises six proteins, namely TRF1, TRF2, TIN2, POT1, TPP1 and RAP1. All of these assemble together to form a complex with double strand and single strand DNA repeats at the telomere. Such an association contributes to telomere stability and its protection from undesirable DNA damage control-specific responses. However, any alteration in the structure and function of any of these proteins may lead to undesirable DNA damage responses and thus cellular senescence and death. In our review, we throw light on how mutations in the proteins belonging to the shelterin complex may lead to various malfunctions and ultimately have a role in tumorigenesis and cancer progression.

• Journal of Korean Academy of Nursing
• /
• v.29 no.6
• /
• pp.1233-1243
• /
• 1999

This study was done to investigate the lives of the daughters- in- law caring for parents with dementia and participate in their lives through having quality time with them Data were collected by depth interviews and interpreted through the hermeneutic circle as follows. These daughters-in-law have conflict between social custom and subjective self. They had ambivalence toward their demented partents-in- law and were fighting a battle between rationality and emotions in their mind. These daughters-in law and mothers-in- law did not get along and the parents' dementia aggravated the relationships. They were alienated from their family by the parents with dementia. The indifference of their family especially their husbands, made these subjects live in misery. They cared for the demented mother-in-law with hatred. Even though they had this yoke, there daughters- in-law were not able to throw off the shackles of convention.

• 연구논문집
• /
• s.32
• /
• pp.15-22
• /
• 2002

In offset or intaglio printing machine, it's operated with combination of blanket cylinder and impression cylinder. The blanket cylinder has some number of grooves to attach the blanket on surface. In case of operating the printing machine, it has generate mechanical impact noise when the two cylinders encounter with the grooves. So, in this study, we developed a printing pressure control algorithm with hydraulic servo control system. We also proposed simulation model of experimental device to analysis the throw on force response of hydraulic servo actuator. Finally, we have reduced the mechanical impact noise and improved printing quality with a groove detecting signal and PI control of hydraulic servo actuator.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.2
• /
• pp.3-7
• /
• 2008

Vibratory conveyors are widely used in industry to transport granular materials and products. A theoretical point mass model for vibratory conveying was studied. The results agreed well with experimental observations. The model theory included the resting, sliding and flight states of the material. Each state was considered separately when determining the equations of motion. For the coefficients of restitution, values of zero for the normal component and 0.8 for the tangential component were found to be appropriate for modeling the collisions of the granular particles with the conveying surface. The vibration angle had a large influence on the mode and rate of transport. There was an optimum vibration angle for a given set of conditions. The optimum vibration angle decreased and was better defined as the coefficient of friction increased. The results suggest the existence of an optimum dimensionless track acceleration (throw number), which does not support general industrial practice in which the track acceleration is limited when the feed cycle becomes erratic and unstable.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.9 no.1
• /
• pp.1-7
• /
• 2005

The genomes of organism are being published in an enormous speed. The genomes has a lot of intronic regions, and repeats constitute a substantial part of that. Repeats playa crucial role in DNA finger-printing, and detecting certain genomic diseases, such as Huntington disease, which has a high number of CAG repeats. Also, they throw important clues about the evolutionary history. Repeats are in two types, Tandem Repeats and Interspersed Repeats. In this paper we address ourselves to the problem of detecting Primary Tandem Repeats, which are tandem repeats that are not contained in any tandem repeats. We show that our algorithm takes O(n log n) time, where n is the length of genome.

• Journal of electromagnetic engineering and science
• /
• v.12 no.3
• /
• pp.216-222
• /
• 2012

This paper presents a single-pole eight-throw switch, based on an eight-way power divider, using substrate integrate waveguide(SIW) technology. Eight sectorial-lines are formed by inserting radial slot-lines on the top plate of SIW power divider. Each sectorial-line can be controlled independently with high level of isolation. The switching is accomplished by altering the capacitance of the varactor on the line, which causes different input impedances to be seen at a central probe to each sectorial line. The proposed structure works as a switching circuit and an eight-way power divider depending on the bias condition. The change in resonant frequency and input impedance are estimated by adapting a tapered transmission line model. The detailed design, fabrication, and measurement are discussed.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.60-63
• /
• 2003

This paper describes the design and the simulation of a V-band single pole double throw (SPDT) FET switch fur millimeter-wave applications using drain impedance transformation network with CPW transmission line. The designed switch has about 10% bandwidth at 60GHz. Insertion loss is better than 3dB fur the ON state and Isolation is larger than 30dB fer the OFF state. The maximum isolation is 43.4dB at 60GHz with input power of 10dBm. The yield analysis is done considering the effects of pHEMT variations.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2233-2235
• /
• 2000

We present the characteristics of microwave and mechanical behavior for the electrostatically actuated z-shaped laterally driven micriomachined CPW SPST(Single Pole Single Throw) Switch, which is for the application of the microwave communication systems. In this paper, we have aimed to maintain advantages. such as low insertion loss and low power consumption that the previously developed RF MEMS Switch has and minimize also stiction problem. enhance the microwave characteristics by etching of substrate beneath the switch, realize the pull-in voltage of below 30V. The optimized design parameters of the MEMS Switch can be selected by the analysis of the mechanical behavior and the use of ANSYS simulation method.