• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1963-1969
• /
• 2009

This paper introduces method to estimate pollutant negative influence to polymer type insulator according to the international standard. To accomplish this goal, effective sample collecting method was surface was collected directly with the same dimension. Distilled Through this method pollute is easily and accurately collected. The second step is pollutant analysis. Several analyze item is selected such as quantity, conductivity, contact angle, Optical Microscope(OM), IR spectrometer(FT-IR), Equivalent Salt Deposit Density(ESDD), Thermal Analyzer(TA) and ICP-AES. The third step, best represent tunnel was selected considering location, length and natural surroundings. Also to consider the difference at inside the tunnel, several bracket insulators were selected along to the location. To make the result precise, above procedure was repeated several times at the same target. Finally relation among type of train, numbers of movement, surroundings, length will be considered in combination with the pollution. With this result pollute map for KORAIL could be accomplished and inspect period will be optimized case by case.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.631-636
• /
• 2007

Eigenvalue reduction schemes approximate the lower eigenmodes that represent the global behavior of the structures. In the, we proposed a two-level condensation scheme(TLCS) for the construction of a reduced system. In first step, the of candidate elements by energy estimation, Rayleigh quotient, through Ritz vector calculation, and next, the primary degrees of freedom is selected by sequential elimination from the degrees of freedom connected the candidate elements in the first step. In the present study, we propose TLCS combined with iterative improved reduced system(IIRS) to increase accuracy of higher modes intermediate range. Also, it possible to control the accuracy of the eigenvalues and eigenmodes of the reduced system. Numerical examples demonstrate performance of proposed method.

• Journal of Welding and Joining
• /
• v.27 no.4
• /
• pp.60-66
• /
• 2009

The cylinder horn is designed to increase uniformity of the displacement on the output face through simulation and experiments for the simple cylinder, spool and step horns. The modal analysis is conducted numerically to calculate the vibration mode and stress distribution of the cylinder horn, and the design of experiment (DOE) technique is employed to determine the optimum configuration of the spool horn. Displacement of the cylinder horn was measured using the Laser Doppler Vibrometer (LDV), and experimental results show good agreements with the predicted results. It appears that uniformity higher than 95% can be achieved with the spool horn when the proper dimension of the groove is used.

• Asia pacific journal of information systems
• /
• v.8 no.1
• /
• pp.27-42
• /
• 1998

In a competitive environment, selecting and effectively pursing the right information system investments can be a key factor in sustaining corporate viability and prosperity. This study applies quality function deployment(QFD) to the determination of information system development priority. The intent of QFD is to incorporate the needs of a customer through the various stages of product planning and manufacturing into a final product. The basic idea of our study is to translate the core competence and the competitive environment into the business strategy, and the critical success factors, and subsequently into information system development priority. Our method is applied to a motor company for the determination of the information system development priority. The company case is illustrated step by step with real data of the company and motor market.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.2
• /
• pp.121-128
• /
• 2018

This work proposes a simple control method of a buck-type active power decoupling circuit that can minimize the ripple values in the dc link voltage. The proposed method utilizes a simplified duty calculation method and an optimal compensation gain tracking algorithm with variable-step approach. Thus, the dc link voltage ripple can be effectively reduced through the proposed method along with rapid response in tracking the optimum compensation gain. Moreover, the proposed method has better dynamic responses in the load fluctuation or abnormal situation. MATLAB/Simulink simulation and hardware-in-the-loop-simulation(HILS)-based experimental results are presented to validate the effectiveness of the proposed control method.

• Journal of Korea Technology Innovation Society
• /
• v.5 no.1
• /
• pp.26-43
• /
• 2002

Korean government has been putting efforts to promote development of technologies by government sponsored labs and to transfer, diffuse, and commercialize these technologies in private sector since mid 1980s. In spite of these efforts, utilization of government-sponsored technology remains in the very low level. According to the survey conducted by Korea Intellectual and Patent Office (1999), the ratio of unused industrial property rights including patents was above 70% of total industrial property rights. Survey on the information and telecommunication industry done by the Institute of Information Technology Assessment (IITA) in 1999 shows that the utilization ratio of government-sponsored technologies is about 55.8%. This is especially true where government is not the primary or end-user of technologies. The purposes of this paper are to (1) identify a process model of technology commercialization, (2) develop the related variables of each step in the six-step continuous process model of government-sponsored technology commercialization, (3) empirically investigate the data gathered through questionnaire survey, and (4) suggest policy alternatives for promoting technology commercialization in Information and Telecommunication industries.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.1
• /
• pp.23-31
• /
• 2008

Recently, there is a rise of accident by some defective products, especially it reported that a serious fact is a defect of design causing some problem since execute a product liability(PL), people who use products have been able to bo remunerated for a damage to those defects, so responsibilities of companies are rising more and more. Therefore, companies that are obligated to manufacture a safety product, and should make preparation for PL. For solving the problem, even though manufacturers tried to make a safety product ay mixed ways, it is seldom that its safety is considered from planning a design. This thesis has suggested a way aimed at improving a safety of products through considering a stage of a plan, by searching and analyzing the design-process in to each steps.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.12
• /
• pp.1138-1144
• /
• 2013

This paper proposes a tactile transfer and display method between a data glove and vibration motors module. The data glove is developed to capture the hand postures and to measure the grip forces. The measured data are simplified with the proposed 5-bit transfer and display algorithm, and the vibration motors module is developed to display the measured hand posture and grip force to the operator. The proposed 5-bit algorithm contains both an 8-step hand posture and 4-step grip force level information for tactile transfer to the vibration motors module. Also, the effectiveness of the proposed method is shown through several experiments.

• Journal of Agricultural Extension & Community Development
• /
• v.17 no.3
• /
• pp.385-418
• /
• 2010

This study aimed to find the way to help participants build capacity in rural development projects, through some case studies and Q-methodology. Decentralization and diffusion of bottom-up approach in rural development projects are the main contextual factors in this study. With the ethos of bottom-up approach in rural development, the human and financial inputs for capacity building increased drastically in the area of rural development policy. Four types of capacity building methods were identified in this study; training, consulting, learning organization, and forum. Theses methods were used more at planning step than implementation step in rural development projects. The government's effort to strengthen leadership in rural areas should be continued. The existing government's training program for capacity building had better include more diverse clients. Actions for capacity building should be centered on the needs of the participants in fields. Especially, organizing learning units is very important. Governments' rural development policy should establish the proper process which can help local actors plan their projects with enough time span.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.4
• /
• pp.57-67
• /
• 1996

This paper aims to support delay-sensitive multimedia applications by suggesting a mechanism in which maintains almost constant end-to-end delay thus providing the optimum playout synchronization. For this task the sum of network delay and buffering delay is entiredly managed and to eliminate little delay fluctuations and instantaneous delays at a buffer and a network, a low pass filter is used. Furthermore the correction function, which is used for maintaining the buffering level ot a reference value, is a non-linear step function, unlike the existing linear and continuous function. it has a different step sizes adapting to a traffic characteristics of a network congestion. the proposed mechanism has been confirmed of it sefficiency through SLAM-II netowrk.